Jonathan Y Jyl3077a Lighting Instructions (+ PDF)

Contents hide

JYL3077A Lighting

Product Information

This product is a lamp with model number JYL3077A. The lamp
dimensions are 43L x 43W x 78.5H. The product comes with a lamp
base, lamp body, socket, shade, socket ring, bulb, hexagon nut,
tooth washer, screw, small wrench, and large wrench. The estimated
assembly time for the product is 6 minutes. The lamp can use an
on/off type A bulb with a maximum wattage of 40 or an LED bulb with
a maximum wattage of 9. The product comes with three LED 9-watt
bulbs in the box. Before installing the product, inspect it
carefully for any damage or defects. Once the product has been
installed, it cannot be returned if there is any damage or
defect.

Product Usage Instructions

Make sure all parts are present and compare them with the
package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Ensure that all parts are aligned before assembling.
Put the shade (D) on the socket (C) and then tighten the socket
ring (E).
Screw the base (A) onto the lamp body (B1).
Insert the bulb (F) into the socket (C).
Screw the tooth washer (H) onto the lamp body (B1).
Screw the hexagon nut (I) onto the lamp body (B1) with the
large wrench (G) and tighten it securely.
Pull the power cord to connect the lamp body (B2) to the lamp
body (B1).
Put the lamp body (B2) onto the lamp body (B1).
Screw the screw (J) onto the lamp body (B2) with the small
wrench (K) and tighten it securely. Be careful not to twist the
power cord.
Put the lamp on a level surface to check if everything is
stable before turning it on.
Unplug lamps before using any cleaning solutions. Dust shades
with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with
the methods appropriate to the material. Avoid the use of chemicals
and household cleaners as they may damage the finish.

View Fullscreen

WARNING INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed **This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY

Lamp base

G Large Wrench

Lamp body

H Tooth washer

Socket

Shade

Socket Ring

Bulb

Hexagon nut

Screw

K Small Wrench

Model# JYL3077A Product Dimensions: 43″Lx 43″W x 78.5″H

PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.

PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9-WATT THERE ARE 3PCS LED 9-WATT BULB IN THE BOX

Step 1

Step 2

Make sure all parts could be aligned before assemble

Put the shade (D) on the socket (C),

Do not rotate lamp body too hard avoid base screw broken

then tighten the Socket ring (E) .

Screw the Base (A) onto the Lamp body (B1)

Insert the bulb (F) into the socket (C).

Screw the tooth washer (H) onto the Lamp body (B1)

Screw the Hexagon nut (I) onto the Lamp body (B1) with large wrench(G),and tighten swcurely

Pull power cord to connect the Lamp body (B2) to the Lamp body (B1).