MOUNT-KB06H Black Clamp on Keyboard Tray
Product Information: Black Clamp-on Keyboard Tray
The Black Clamp-on Keyboard Tray (SKU: MOUNT-KB06H) is a
keyboard mount that can be clamped onto the edge of a desk. It
comes with two clamps, two clamp brackets, and two pads for
securing the mount onto the desk. The keyboard tray can support up
to 11lbs (5kg) and is only compatible with desks that are 0 – 40mm
thick. The product is not suitable for children under 3 years of
age and requires adult supervision during assembly.
Product Usage Instructions:
- Remove the keyboard tray (A), clamps (B), clamp brackets (C),
pads (D), and M5x14mm screws (S-A) from the package. - Using a Phillips screwdriver, attach the clamp brackets (C) to
the keyboard tray (A) using the M5x14mm screws (S-A). - Open the clamps (B) by unscrewing the hand bolts and attach the
pads (D) to the underside of the clamps. - Place the assembled keyboard mount on the edge of the desk and
tighten the clamps (B) to secure. Ensure that the rear edge of the
tray is facing forward. - Flip the lever on each clamp (B) to the open position and
rotate the keyboard tray (A) to the forward position. Flip the
levers to the closed position to lock the tray in place.
If you experience any issues during assembly or have received
damaged or defective parts, contact VIVO’s support team at
[email protected] or call 309-278-5303 for assistance.
Black Clamp-on Keyboard Tray
Instruction Manual
SKU: MOUNT-KB06H
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product. https://vivo-us.com/products/mount-kb06h
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Keyboard Tray
TOOLS NEEDED
Phillips Screwdriver
B (x2) Clamp
C (x2) Clamp Bracket
D (x2) Pad
S-A (x6) M5x14mm Screw
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
11lbs (5kg)
ASSEMBLY STEPS
STEP 1
Mount Clamps (B) to Keyboard Tray (A) using Clamp Brackets (C) with M5x14mm Screws (S-A), and tighten with a Phillips screwdriver.
Please note, the clamps are
delivered in the flipped position.
S-A
The rear edge of the tray will face
forward until later.
C
B
A 2
STEP 2
Open Clamps (B) by unscrewing the hand bolts, then apply Pads (D) to the underside of Clamps (B). D
B
STEP 3
Place the assembled keyboard mount on the edge of the desk and tighten Clamps (B) to secure. DESK B
NOTE: Only supports 0 – 40mm thick desk
STEP 4
Flip the lever on each Clamp (B) to the open position, then rotate Keyboard Tray (A) to the forward position. Flip the levers to the closed position to lock the tray.
A B
180°
3
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 03/08/2022 REV2
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com















