XpressSX AGI-FH400G Full Height Half Length Pcie Gen5 Network Processing Board
Product Information
Product Name: XpressSX AGI-FH400G
Description: Full height, half length PCIe Gen5
Network Processing board
Specifications:
- FPGA Configuration: 2700 KLE PCIe Edge Gen5 x16, CXLTM
- Network Speed: 400GbE (8 x 56)
- Memory: 3x DDR4
- Connectors: 4x HSI connectors (PCIe Gen5 x16 EP)
- Features: Security SmartNIC, Networking Acceleration
Product Usage Instructions
Step 1: Ensure that you have a PCIe Gen5
compatible server to achieve the full PCIe Gen5 x16
performances.
Step 2: If you are using a PCIe Gen4 compatible
server, use the provided PCIe Gen4 x16 daughter card. This will
allow the system to achieve 2x Gen4 x16 performances similar to
PCIe Gen5 x16. The daughter card also supports x8x8 bifurcation
mode.
Step 3: Connect the XpressSX AGI-FH400G board
to the server’s PCIe slot. Make sure it is securely inserted.
Step 4: Connect the power supply to the board.
The board is powered by the PCIe slot and an additional 8 pin PCIe
Aux ATX external connector.
Step 5: Connect any required interfaces to the
board, such as USB devices or HSI cables.
Step 6: Once the board is properly connected,
you can start using it for high-speed packet processing. The board
is equipped with FPGA configuration, memory, and network
acceleration features to facilitate your design.
Note: For more information on PCIe Gen5 CXLTM
interface validation and technical support, please contact REFLEX
CES.
XpressSX AGI-FH400G
Full height, half length PCIe Gen5 Network Processing board
Intel® AgilexTM I-Series SoC Quad Core ARM® Cortex® A53
2700 KLE PCIe Edge Gen5 x16, CXLTM
400GbE (8 x 56) 3x DDR4
4x HSI connectors (PCIe Gen5 x16 EP) Security SmartNIC
Networking Acceleration
1/5
Full Specifications
FPGA Configuration
Memory
Power Operating Range Storage Range
Intel® AgilexTM I-Series : AGIB027R29A1E2V including SoC: Quad Core ARM® Cortex® A53
Board Dimensions
SoC support for the Production Silicon version 400GT only Communication
Flash configuration
Interfaces
USB 2.0 Hub for JTAG, UART, BMC, USB2
1x on-board DDR4 (mutual SoC / FPGA), x64 bit bus, 4GBytes up to 2666 MT/s
2x DDR4 SO-DIMM sockets, each capable up to 32GBytes SO-DIMM, with ECC
eMMC or SD Card holder (if used) for SoC
200W max, delivered with 2-slot active heatsink Powered by the PCIe slot and an 8 pin PCIe Aux ATX external connector (additional power)
0°C to 35°C
Other Resources
0°C to 70°C
Standards and Compliance
Full height half length: 167.7mm x 111.15mm
PCIe Edge Gen5 x16 CXLTM standard compatible*:
Open standard interconnection for high-speed CPU-to-device and CPU-to-memory Built on the PCIe physical and electrical interface 8x QSFP56-DD (8x 56G: 400G total) 2x HSI connectors (ARF6-16-L-RA): Total of 16 transceivers for PCIe Gen5 EP, CXLTM standard compatible 2x HSI connectors (ARF6-16-L-RA): Total of 16 transceivers for PCIe Gen5 EP 2x USB-C connectors for HSI Clocks & control signals
Board Management Controller (MAX®10 device) Programmable PLL
RoHS/REACH compliant UL certified ISO9001 certified
*Use of CXLTM features might require separate CXLTM IP license purchase. Please contact Intel® for details. 2/5
Additional PCIe Gen4 x16 daughter
The XpressSX AGI-FH400G board needs to be inserted in a PCIe Gen5 compatible server in order to deliver the full PCIe Gen5 x16 performances.
In case the user is only using a PCIe Gen4 compatible server, the XpressSX AGI-FH400G is delivered with this PCIe Gen4 x16 daughter card. This way, the system will achieve 2x Gen4 x16 performances similar to PCIe Gen5 x16, using two R-Tile PCIe Hard IPs inside the FPGA.
The daughter card also supports x8x8 bifurcation mode.
Clocks USB-C
HSI x8
HSI x8
PCIe Edge Gen4
PCIe Edge Gen4
Deliverables
Full height half length 2-slot PCIe board with active heatsink and PCIe bracket
2x DDR4 SO-DIMM 32GByte each Board Support Package: Manuals, 2D drawing, HDL reference designs
(Contact REFLEX CES for PCIe Gen5 CXLTM interface validation)
DWF/STEP models (upon request)
Online support at support.reflexces.com NDK package (including DPDK NIC application) provided separately
by BrnoLogic
2x HSI cables (ARC6-16-10.0-LU-LD-2-1) and 1x USB-C to USB-C cables (0.72ft), 3.1 Gen2 to connect the PCIe Gen4 x16 daughter card
PCIe Gen4 x16 daughter card
Ordering information
XpressSXAGI-FH400GT-ES XpressSXAGI-FH400GT
= Intel® AgilexTM SoC I-Series ES Silicon (AGIB027R29A1E2VR3), 3 banks DDR4 – No SoC support = Intel® AgilexTM SoC I-Series Production Silicon (AGIB027R29A1E2V), 3 banks DDR4
Contact sales for availability and pricing
Europe Sales Office / [email protected]
North America Sales Office / [email protected]
www.reflexces.com
3/5
Development Framework for High-speed Packet Processing
Start your design from standard NIC Provided as a free demo application Network module based on F-Tile 400G Ethernet
Hard IP Ultra fast DMA with 400 Gbps throughput based
on PCIe Gen5 x16 interface (R-Tile) Easy to use memory interface for single
read/write data from/to card Preconfigured DDR4 controller for memory
access from the user logic Precise timestamps with 2.5 ns resolution for
400G Ethernet
Easy to use NDK Development Framework Set of open-source IP cores for data manipulation Automatic scripts for complete design synthesis Single make command to create complete FPGA bitstream Bitstream identification through DeviceTree ROM Easy to use software stack in a single RPM package Linux kernel driver, DPDK support, user space library, tools for the configuration of components Easy creation of custom application by user-friendly API for component access and DMA transfers Fully parameterizable and modular hardware and software architecture
Part number: NDK-PROF-SUPPORT
[email protected] www.brnologic.cz
Open source IP core library www.liberouter.org/ndk
4/5
Target Network Applications Hardware acceleration of precise network monitoring, IDS/IP systems, next generation firewalls, test equipment, Anti DDoS and other time-critical networking applications.
Only one card for 10, 40, 100, 200 and 400 GE link speeds.
Security devices Hardware filters and pattern matching to accelerate IDS/IPS systems Precise packet filtering and packet capture for lawful interception Anti DDoS with hardware IP or flow filtering controlled by software
Network monitoring probes High-speed packet capture with up to 512 receive queues, DPDK support Extraction of features for encrypted traffic analysis Variety of packet classification engines with wire-speed performance:
TCAM with up to 512 general rules, each defined with individual wildcard mask Longest Prefix Match in deep pipeline with capacity for up to 100k prefixes Exact Match hash table with support for up to a million unique keys DDR/QDR/HBM based connection tables with tens of millions flow records
Design services
The card is prepared for custom hardware acceleration in FPGA
We provide FPGA design based on high-speed 400 Gb IP cores for:
packet headers parsing (Ethernet, ICMP, IPv4, IPv6, MPLS, etc.), packet filtering and classification, flow cache and connection tracking tables, fast pattern matching and many other IP cores for fast packet processing in deep pipelines.
Contact information
[email protected] www.brnologic.cz
Open source IP library www.liberouter.org/ndk
© reflex ces 2023-All Rights Reserved Jan/v4.2
5/5
Úvod | BrnoLogic
