ITC 69503-KK Push Lens Courtesy Light
PARTS/TOOLS NEEDED:
- Push Lens Courtesy Light
- Butt Splice Connectors
(Not Provided)
- Power Drill
IMPORTANT SAFETY INSTRUCTIONS.
READ CAREFULLY FOR YOUR PROTECTION AND SAVE ALL INSTRUCTIONS.
- Disconnect power before installing, adding or changing any component.
- To avoid a hazard to children, account for all parts and destroy all packing materials.
- It is recommended that fuse protection be added to the positive(+) input.
Mounting
- Determine the installation location and drill a 3/4” hole. Smooth the hole.
- Feed the wires back through the hole and push the light into the mounting surface.
- Using the wiring diagrams below, wire the light to the incoming 12V DC power. Test the light.
ITC Warranty & Return Policy
