JYL9930 8 Chic Boho Chandeliers and Pendant Lights
Product Information
This product is a lighting fixture that requires installation by
a licensed electrician. It comes with a mounting plate, lamp body,
lamp shade, lifting loop, chain, canopy, canopy nut, and bulb. The
fixture can accommodate a Type A bulb with a maximum wattage of 40W
or a CFL/LED bulb with a maximum wattage of 13W/9W. The package
includes 1 x 4W LED bulb.
Product Usage Instructions
- Switch off the main electrical supply from the main fuse
box/circuit breaker before installation. - Inspect the item carefully before attempting to install. If
there is any damage or obvious defect, do not install. Item may not
be returned once it has been installed. - Fix the mounting plate (A) to the junction box with mounting
screw (H). - Remove the lamp body (J) from the lamp shade (L) by turning the
nut (G) counterclockwise. - Fix the lifting loop (K) to the lamp body (J) by turning it
clockwise. - Thread the chain (E) through special canopy (B) and canopy nut
(D), and connect one end of the chain to the hanging loop (C) and
the other end to the loop (K). - Connect the main line and ground wire on the lamp body with the
main line and ground wire in the junction box using wire nut
(I).
- Connect hot, black or red outlet supply wire to: black parallel
cord (round & smooth), clear, brown, gold or black without
tracer (colored stripes), insulated wire (not green) with copper
metal conductor. - Connect neutral, white outlet supply wire to: white parallel
cord (square & ridged), clear, brown, gold or black with tracer
(colored stripes), insulated wire (not green) with silver metal
conductor. - Note: When parallel wire (SPT I & SPT II) is used, the
neutral wire is square shaped and ridged and the hot wire will be
round in shape and smooth.
(D) clockwise to secure it.
bulb (M) with wattage no greater than specified in the
instructions. Always make sure that electrical current is turned
off before changing the bulb.
turn the nut (G) clockwise to secure it.
WARNING WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slighly damperned clean clorth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this luminaire cannot be replaced If the cord is damaged, the luminaire shall be destroyed
Part List and Hardware List
Model#: JYL9930 Product Dimensions: Ø12.5″X19″H
1/2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
1. Fix the Mounting Plate(A) to the junction box with Mounting Screw (H).
2. Carefully remove the Lamp Body (J) from the Lamp Shade (L) by turning the Nut (G) counter clockwise
3. Turn clockwise to fix the lifting Loop (K) to the Lamp Body (J),
4. Chain (E) Through special Canopy (B) and Canopy Nut (D), Closable Link (F) is used to connect one endChoaf in (E) to the Hanging Loop (C) and the other end to the Loop (K).
5. Connect the main line and ground wire on the lamp body with the main line and ground wire in the junwctitiohnthbeoxWire Nut ( I )
Connect, Hot, Black or Red Outlet Supply Wire to: Black
* Parallel Cord (round & smooth)
Clear, Brown, Gold or Black without Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Connect, Neutral, White Outlet Supply Wire to: White
* Parallel Cord (square & ridged)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around green ground screw on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw.
6. Push the Canopy(B) up to the ceiling and turn the Canopy Nut (D) clockwise to secure it
7. Insert the bulb (M) into the Sockets. Be sure to use light bulb(M) with wattage no greater than specified onftixhtiusre. Always make sure that electrical current is turned off before changing bulb. 8. Carefully place the Lamp Body (J) into the Lamp Shade (L) and turn the Nut (G) clockwise to secure it
PLEASUE USE TYPE”A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED MAX 9-WATT THERE ARE 1 X 4W LED BULBS IN THE BOX.
ENJOY YOUR LAMP 2/2
