Spinning 10-033-tm Elite Connected Spinner Owner's Manual

10-033-TM Elite Connected Spinner
Owner’s Manual

THE SPINNER® ELITE

Congratulations on your purchase of a Spinner ® Elite Bike. As the creators of Spinning ® and the worldwide leaders in indoor cycling bikes and programs, we’re here to help you get the most out of every ride. Whether your goal is to lose a few pounds, stay in shape, or train for the next race, the team at Spinning ®is here to help you every step of the way. This owner’s manual is just the beginning.
The Spinner ® Elite offers the same heavy-duty construction as our commercial Spinner ® bikes in a package that is perfect for home use. It can be upgraded at any time with our Performance SPINPower ® crank so that you can train with power. Our home bikes offer the same range of adjustments and heavy-duty construction as our commercial Spinner ® bikes in a package that is perfect for home use.

Need help? Scan the code to check out our Spinning® Support Video Library and other useful information about your new bike and the Spinning® program.

https://www.youtube.com/playlist?list=PLZwv65qs7XFRP_gw32Kh0WRkgpUTt1Atu

Enjoy the ride.

For more information about the Spinning® program, indoor cycling gear, and tips to help you make the most of every ride, visit www.spinning.com.
© 2021 Mad Dogg Athletics, Inc. All rights reserved.

THANK YOU!
Thank you for purchasing your new Spinner® Elite bike. Your bike has been designed and engineered for safety, durability and to provide a great ride. The following pages will outline a number of safety precautions and part diagrams for your reference. It is important to thoroughly read through this manual and follow all warnings for the best overall experience with your new ride.

WARNING

• FAILURE TO READ AND FOLLOW THE INSTRUCTIONS IN THIS MANUAL MAY RESULT IN POSSIBLE SERIOUS INJURY.
• PEDAL SPEED SHOULD BE REDUCED IN A CONTROLLED MANNER.
• FIX YOUR FOOT IN THE PEDAL CAGE OR SPD CLEAT DURING EXERCISING TO PREVENT UNINTENDED MOVING.
• IT’S IMPORTANT TO ADJUST AND SECURE THE HANDLEBAR AND SEAT TO YOUR DESIRED POSITION FOR A COMFORTABLE AND SAFE RIDE. DO NOT EXCEED MINIMUM INSERTION DEPTH MARKS LABELED ‘STOP’ OR ‘MAX’ ON THE HEAD POST AND SEAT POST VERTICAL ADJUSTMENTS.

IMPORTANT SAFETY PRECAUTIONS
This bike has been designed and constructed for a safe and comfortable ride. Nevertheless, certain precautions should be taken when using any piece of exercise equipment. Read the whole manual before assembling and using the bike. The following safety precautions should also be observed:

1. Keep children and pets away from the Spinner® bike at all times. Parents and/or those responsible for children should always take their curious nature into account and the potential of induced hazardous situations and behavior resulting in accidents. Under no circumstances should this Spinner ® bike be used as a toy.
2. The owner is responsible for ensuring that anyone who uses the machine is duly informed about the necessary outlined precautions and the proper way to ride.
3. This bike can only be used by one person at a time.
4. Use suitable clothing and footwear. Make sure all laces/cords are tied and tucked-in so that they are not loose or can be tangled into any parts of the bike.
5. Turn the resistance knob clockwise until the flywheel is locked when the bike is not in use.
6. This bike does not free-wheel. Pedals will continue to spin. Use caution when slowing and stopping. In an emergency, stop pedaling and push the resistance knob down as an emergency brake to stop the pedals and flywheel from rotating. Uncontrolled spinning pedals can cause injury.
7. If you experience dizziness, nausea, chest pains, or any other symptom while using this bike STOP exercising and SEEK MEDICAL ATTENTION IMMEDIATELY.
8. Install and ride the bike on a mat that is placed on a level, solid surface and that has a minimum of 1 meter (39.4”) of unobstructed space around it on all sides. Adjust the stabilizer feet to make the bike level, secure, and stable on all four feet at the same time.
9. Keep hands well away from any of the moving parts.
10. Wear clothing suitable for riding. Do not wear loose or baggy clothing that might get caught up in the parts of the bike. Always wear cycling shoes or athletic shoes with laces tucked in when using the bike.
11. This bike must only be used for the purposes described in this manual.
    DO NOT use accessories that are not recommended by Spinning ®.
12. Differently-abled people should not use the bike without the assistance of a qualified person or a doctor. This is not a medical device and should be used with caution.
13. Do not use the bike if it is not working correctly.
14. Review all warning labels affixed to the bike and replace any label that is damaged, illegible, or removed. Contact customer service at Spinning.com for replacements.
15. Functional and visual inspections of the bike should be made before the bike assembly is complete and prior to any ride.
16. Do not exceed the MAX/STOP mark when adjusting the handlebar post or seat post.
17. Spinning® pedals can cause injury. Pedal speed should be reduced in a controlled manner.
18. Before using the bike, thoroughly inspect the bike for proper assembly.
19. The user must adjust the seat and handlebars to suit the user’s dimensional requirements. When adjusting, please ensure that the bike is stable and that the resistance knob is turned to clockwise to immobilize the flywheel. Thoroughly tighten the corresponding adjustment knobs to ensure that the seat and handlebars are secure before riding.
20. This bike should only be used for home (consumer) use and is not meant for commercial use.
21. Before every ride please examine the brake pad, pedals, and drivetrain for signs of wear. The brake pad is a normal wear item and may need to be replaced over time.
22. This bike is not suitable for therapeutic use and is for consumer use only. Consult a physician prior to starting any exercise program.
23. The safety level of the bike can be maintained only if it is examined regularly for damage and wear (e.g. brake pad, saddle, pedals, drivetrain, etc).
24. Replace defective or worn components immediately and/or refrain from using the bike until it is serviced or repaired.
25. Special attention must be paid to all wear components (e.g. brake pads, etc.).
26. Please adjust the handlebar and seat to your best biomechanical positioning. Incorrect form and/or excessive training may result in injury.
27. Turn the resistance knob counter-clockwise to release the brake before exercising.

TOOLS INCLUDED FOR SPINNER® BIKE ASSEMBLY

Use the included tools for bike assembly only.

BIKE INFORMATION AND SPECIFICATIONS

SPINNER® SPINNER ELITE- 127.8 Lbs (58 Kg)
ASSEMBLED SIZE: 1145mm Long x 502mm Wide x 1425mm Tall (avg, without tablet installed)

OPERATION AND INSTALLATION PERIMETER

PERIMETER SPACE:
Keep at least 1 meter (39.4”) of clear space around the entire bike

SPINNER® ELITE PARTS LIST

SPINNER® ELITE EXPLODED VIEW

WELCOME TO THE SPINNING ® PROGRAM

Spinning® was born on the road, raised in the studio, and made for your home. We’ve helped millions of people around the world get into the best shape of their lives and we can’t wait to ride with you.
The bike is just the beginning! Now you can create your own Spinning® experience by choosing content and gear for a ride tailored just for you. Try one of our apps on for size with a free trial for the Spinning® subscription of your choice.
Spinning® Digital delivers 24/7 access to on-demand rides with rockstar instructors. Stream rides directly to your favorite Wi-Fi-enabled TV, computer or favorite mobile device. With a diverse selection of instructors, training styles, and durations, you can get the workout you want, whenever you want – even when you can’t get to the studio.
Spinning® Digital+ is our all-in-one app that combines all the rockstar instructors and rides from Spinning® Digital with real-time metrics and tracking. It pairs with your heart rate monitor and your bike (with a power crank or cadence sensor) to deliver personal metrics and training zones during your ride! Your performance is tracked with detailed graphs and workout history, so you’ll see your progress as you crush goals and gain power!

SPINNING® PROGRAM SAFETY

• Consult your physician before beginning this or any other exercise program. Not all exercise routines are suitable for everyone. Discontinue any exercise that causes you discomfort and consult a medical expert.
• Ensure that the adjustment knobs (saddle height, saddle fore/aft and handlebar height) are properly secured and do not interfere with your pedaling of motion.
• Children under the age of 16 should not ride the Spinner ® bike.
• Do not insert any object, hand or foot into any openings. Do not expose hands, arms or feet to the drive mechanism or any other potentially moving parts of the bike.
• The body weight for individuals riding the Spinner ® Elite should not exceed 300 pounds (136 kg).
• Spinner ® bikes have a weighted flywheel and fixed gear that do not allow riders to coast. This means that in order to stop, you must gradually slow your pedal strokes rather than stop abruptly. If you need to stop immediately, push down on the red resistance knob.
• After use, turn the knob clockwise to increase the resistance so that the pedals will not rotate freely.
• If at any time you feel dizzy or have difficulty breathing, press down on the red resistance knob until you come to a complete stop and carefully dismount the bike.
• Listen to your body, ride at your own pace, and set a resistance load that feels right for you.
• Keep children and pets away from the bike whenever it is in use.
• Stay hydrated. Drink plenty of water throughout your ride.
• Pedal with a light amount of resistance at all times, even during warmup and cool-down. The Spinning ® program reminds riders to maintain a connection to the flywheel with resistance throughout the ride.
• Stay in control by executing all movements and hand positions at a slow pace before attempting to increase your pedaling speed.
• Focus on form, posture, and smooth transitions between movements.
• Always ride with proper footwear. Do not ride with bare feet or open-toed shoes.
• Keep shoelaces tucked in and foot straps snug around your shoe. If your foot does come out of the toe clip, push down on the resistance knob to stop the flywheel’s motion before clipping back in.

YOUR SPINNER® BIKE

The patented Spinner® bike has been specially designed for the Spinning ® program. The Spinner ® bike replicates the feel of a real road bike to create an enjoyable, effective and fun workout. Some key features include:

• A contoured saddle to keep you comfortable and balanced. You can adjust the saddle horizontally and vertically for a personalized fit.
• Adjustable handlebars featuring a rubberized coated grip and a patented design that facilitates the four Spinning ® hand positions.
• An adjustable resistance knob that doubles as an emergency brake to keep you in control of your ride. Simply twist the dial clockwise to add more, or counterclockwise to reduce resistance.
• A-weighted flywheel to create a non-impact workout and facilitate a fluid pedal stroke.

Your Spinner® bike uses a direct-drive flywheel that does not allow you to coast. To stop, decrease your pedaling speed gradually. If you need to stop immediately, push down on the red resistance knob.

CARING FOR YOUR SPINNER® BIKE

MOVING YOUR BIKE
Stand in front of the bike, grasp the handlebars and tip the bike toward you until the transportation wheels are touching the floor. Roll the bike to the desired location, then gently lower the rear of the bike back to the floor.
LEVELING YOUR BIKE
The leveling feet are located on each corner of the front and rear stabilizer bars. It is important that all four of the leveling feet touch the ground to keep the bike stable at all times. To adjust, turn the leveling feet counterclockwise to decrease the height or clockwise to increase the height until the bike is stable.
ADJUSTING AND LEVELING YOUR SADDLE
If you experience saddle discomfort while riding or sitting on your bike, the angle can be adjusted by loosening the 13-mm nuts located under the saddle. Be sure to re-tighten the nuts before riding your bike.
PREVENTING RUST
After each use, raise the handlebar post and seat post to the highest settings to allow any moisture to evaporate. Using an absorbent cloth, wipe all areas where moisture can settle.
PROTECTING YOUR SPINNER® BIKE’S FINISH
After each ride, protect your bike’s finish by wiping it down with a damp cloth. We recommend using bike cleaners such as SPINTECH® Fitness Equipment Polish. Do not use de-greasers. When cleaning your bike, immobilize the flywheel by turning the resistance knob clockwise. Always keep your hands, fingers, clothing, and cleaning cloths clear of a moving drivetrain.
PEDALS
Check the pedals weekly to ensure that the threads are completely tightened. If the pedals have become loose, tighten the threads with the supplied pedal wrench to ensure that they are securely attached.

SPINNER® BIKE ASSEMBLY

STEP 1: UNPACK THE CARTON
Open the shipping carton and remove all of the parts. Make sure that the following parts are included and no damage has occurred during shipping:

• Bike frame with flywheel
• Front stabilizer bar with transportation wheels
• Rear stabilizer bar
• Handlebars
• Handlebar stem
• Pedals
• Pop pin assembly seat
• Seat slider and saddle
• Seat post
• Owner’s manual
• Fore/aft adjusting lever seat
• Assembly card that includes all of the tools and hardware needed to put your bike together
• Tablet holder assembly.
• Left-side crank.

Take the time to enter your Spinner® bike serial number in the space below (the serial number is located on the bottom crossbar). If parts are missing or if you have any assembly questions, please contact customer service at 888.704.SPIN (7746).
Serial No. : ____________________________________________

STEP 2: ATTACH THE STABILIZER BARS

Have someone help you tilt the bike forward (toward the flywheel) and stabilize it. Remove the rear plastic shipping guard. Then attach the rear stabilizer bar from the underside with the provided bolts and washers. Line up the holes in the stabilizer bar with the holes in the frame. Using the included wrench, tighten the bolts (with washers) securely. Repeat the process (now leaning the bike rearward) with the front stabilizer bar.

STEP 3A: ASSEMBLE THE SEAT POST

1. Place the seat slider on top of the seat post, making sure that the sliding threaded part fits near the rear of the lower slot of the seat post.
2. Place the large brass washer on the threaded portion of the seat lever. Screw the lever into the threaded slider several rotations.
3. Position the lever straight back, then use a 6mm Allen wrench to secure the bolt while pulling down on the lever (as shown left). Note that after the lever is
   tightened it can be adjusted to stay out of the way by pulling just the handle straight down and rotating it to the desired position before releasing.
4. Install the seat post-pop pin and tighten the bolt securely making sure that the thin washer is properly seated and centered between the pop-pin and the frame boss.

STEP 3B: INSTALL THE SADDLE

While holding and pulling back the seat post-pop-pin, slide the seat post into the seat tube. Release the pop-pin. Adjust the seat post to make sure the pop-pin is properly engaged. Tighten the seat post-pop pin securely. Adjust the seat slider (fore/aft) to your desired position, then tighten the seat lever securely.
STEP 4: HANDLEBAR ASSEMBLY

Insert the chrome handlebar post onto the threaded handlebar stem making sure that the holes line up. Using a 5mm Allen wrench, insert then tighten the two large bolts on the front of the bar. Now insert then secure the 3mm bolt at the rear of the post. Check to make sure that all the bolts are tightened securely before proceeding.

STEP 4A: INSTALL THE TABLET MOUNT

Locate the 2 bar washers and 4 bolts as shown and align the holes with the threaded bosses underneath the center section. Use the Allen wrench to tighten the Allen bolts securely.
STEP 4B: ATTACH THE TABLET CLAMP TO THE ARM

Push in and slide down gently to fully engage the snap locks as shown. Note the orientation of the tabs and slots.
Pivot bolts can be tightened for a stiffer angle adjustment and should always be snug. Use caution and do not over-tighten these bolts.

STEP 4C: ATTACH THE TABLET

Open holder tabs using two hands and place tablet securely. Use caution to keep tablet side controls away from holder tabs.
STEP 5: INSTALL THE HANDLEBARS

Unscrew, pull out and hold the handlebar pop-pin. Slide the handlebar post all the way into the handlebar tube. Release the handlebar pop-pin and adjust the handlebars to make sure that the pop-pin is engaged. Tighten the handlebar pop-pin securely before riding.

STEP 6: INSTALL THE CRANK

Locate the left side crank and push it onto the axle in the opposite orientation of the drive side crank. Give the crank a tap with the hand at that axle bolt location to make the connection snug. Now find the 14mm crank bolt on the assembly card and hand thread the bolt into the axle hole as far as possible, making sure that the threads are engaged and the bolt is straight. Use the supplied 14mm socket wrench to tighten the bolt clockwise. Make sure it is tight and then snap the dust cap into the bolt hole.

NOTE: The pedal spindles and cranks are marked “L” (left) and “R” (right). Left and right are referenced from a seated position on the bike. Be sure to install the pedals on the correct side of the bike.

STEP 6B: INSTALL THE PEDALS

Turn the resistance knob clockwise until the crank arms are immobilized. Remove the pedals from the packaging. Install the left pedal on the left crank. Use the multi-wrench supplied and turn counterclockwise to tighten. Install the right pedal on the right crank. Use the multi-wrench supplied and turn clockwise to tighten. Remember, pedals are always tightened by turning the wrench over the top of the spindle towards the front of the bike. Be sure both pedals are tightened securely.

STEP 7: LEVEL THE BIKE

Move the bike to a level location where it will be used. Your Spinner Bike requires 1 meter (39.4”) of unobstructed space all the way around the perimeter. Rock the bike gently to check for wobble. If needed, use the leveling feet under the front and rear stabilizer bars to steady the bike. Turn the leveling feet counterclockwise to decrease the height or clockwise to increase the height until the bike is stable

TESTING THE BIKE

Use this checklist to perform the bike test procedure:

• Re-check all bolts. Make sure that they have been tightened and that no parts are missing or leftover.
• Test the handlebar post and seat post to make sure that they move freely and that you are able to lock them at different positions.
• Check the saddle to make sure that it is level and tight, and that it does not rotate around or tilt. Tighten and adjust as needed.
• Test the seat slider and handlebar slider (if applicable) for movement front to rear. Check it by locking it at different settings.
• The brake tension (resistance) can be adjusted using the red resistance knob. Pressing down on the red knob will apply the brake if you need to stop quickly.
• Adjust the seat post and handlebar post to your bike fit needs.
  Visit www.spinning.com for more information. Or refer to the playlist at https://www.youtube.com/playlist?list=PLZwv65qs7XFRP_ gw32Kh0WRkgpUTt1Atu for video help.
• Pedal at a moderate pace and test for proper and smooth resistance changes while varying the number of turns on the resistance knob.
• To move the bike after testing is complete, stand in front of the bike, grasp the handlebars and tip the bike toward you until the transportation wheels are touching the floor. Roll the bike to the desired location, then gently lower the rear of the bike back to the floor. Make sure to adjust the leveling feet so that the bike remains stable at all times.

WARNING!

SAVE THESE INSTRUCTIONS
THE MOMENTUM OF THE FLYWHEEL OF THE BIKE WILL KEEP THE PEDALS TURNING EVEN AFTER YOU STOP PEDALING OR IN THE EVENT THAT YOUR FEET SLIP OFF OF THE PEDALS. DO NOT DISMOUNT THE BIKE OR ATTEMPT TO REMOVE YOUR FEET FROM THE PEDALS UNTIL BOTH THE PEDALS AND THE FLYWHEEL HAVE STOPPED COMPLETELY. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY LEAD TO LOSS OF CONTROL AND SERIOUS PERSONAL INJURY.

TROUBLESHOOTING

RATTLING HANDLEBARS OR SEAT POST
Make sure that the pop-pins are correctly locked into place.

SADDLE PAIN
Check to ensure that the saddle is centered and level. Adjust the level as necessary using the outside bolts (shown in RED). Remember that it does take time for a body to acclimate to the saddle. A padded gel seat cover and/or cycling shorts can make your ride more comfortable.

PEDAL ADJUSTMENTS

The SPD®-compatible pedals are set for the lowest release tension at the factory for safety. If you would like a stronger release tension, use a 3mm Allen wrench and turn the adjustment screw clockwise. Adjust both sides evenly and start with as little adjustment as necessary until you achieve the desired release tension.

BRAKE PAD REPLACEMENT

STEP 1: Remove tension from the brake pad by turning the resistance knob counterclockwise as far as possible. You should feel a “stop” when the knob is completely loose and you cannot rotate the knob any farther.

STEP 2: Using a box wrench, carefully remove the two bolts supporting the brake pad (see red arrows left). Remove the old brake pad assembly. Position the new brake pad assembly onto the frame. Make sure that the brake pad is between the resistance knob shaft and the flywheel. Carefully reinstall the two bolts through the brake pad bracket and into the frame. Start threading the bolts with your fingers to ensure that you do not cross-thread the bolts. Finish tightening the bolts with the box wrench.

NOTE:
For belt tension and adjustment instructions, please visit spinning.com/bike-maintenance

WARNING!

SAVE THESE INSTRUCTIONS
THE MOMENTUM OF THE FLYWHEEL OF THE BIKE WILL KEEP THE PEDALS TURNING EVEN AFTER YOU STOP PEDALING OR IN THE EVENT THAT YOUR FEET SLIP OFF OF THE PEDALS. DO NOT DISMOUNT THE BIKE OR ATTEMPT TO REMOVE YOUR FEET FROM THE PEDALS UNTIL BOTH THE PEDALS AND THE FLYWHEEL HAVE STOPPED COMPLETELY. FAILURE TO COMPLY WITH THESE INSTRUCTIONS MAY LEAD TO LOSS OF CONTROL AND SERIOUS PERSONAL INJURY.

MAD DOGG ATHLETICS, INC.
LIMITED WARRANTY

Spinner® Elite
MAD DOGG ATHLETICS, INC. WARRANTS TO THE ORIGINAL PURCHASER THAT SPINNER® BIKES WILL BE FREE FROM  DEFECTS IN WORKMANSHIP AND MATERIALS. ALL OTHER SPINNER PARTS ARE COVERED FOR ONE (1) YEAR FROM THE DATE OF PURCHASE (SEE LIMITATIONS AND EXCLUSIONS BELOW). THIS WARRANTY DOES NOT COVER LABOR CHARGES ASSOCIATED WITH REPLACING COVERED COMPONENTS. PART(S) REPLACED UNDER THE TERMS OF THIS WARRANTY WILL BE WARRANTED FOR THE REMAINDER OF THE ORIGINAL WARRANTY PERIOD ONLY. THIS WARRANTY BECOMES EFFECTIVE UPON THE INVOICE DATE OF THE ORIGINAL PURCHASE FROM AN AUTHORIZED SPINNING® DEALER ONLY. HOME SPINNER BIKES ARE NOT FOR COMMERCIAL USE AND ARE WARRANTIED FOR HOME USE ONLY.
TO ORDER REPLACEMENT PART(S), THE ORIGINAL PURCHASER MAY CONTACT MAD DOGG ATHLETICS, INC. PRODUCT SUPPORT AT (800) 847.SPIN. PROOF OF PURCHASE OR WARRANTY REGISTRATION MAY BE NEEDED IN ORDER FOR MAD DOGG ATHLETICS, INC. TO VERIFY WARRANTY COVERAGE AND ISSUE A RETURN MATERIALS AUTHORIZATION (RMA) NUMBER. PARTS BEING RETURNED TO MAD DOGG ATHLETICS, INC. FOR WARRANTY CREDIT MUST BE SHIPPED PREPAID, ACCOMPANIED BY A PACKING LIST OR TAG BEARING THE RMA NUMBER AND THE CUSTOMER NAME. NO CREDIT WILL BE ISSUED FOR PARTS RETURNED WITHOUT PRIOR AUTHORIZATION FROM MAD DOGG ATHLETICS, INC. TO NOTIFY MAD DOGG ATHLETICS, INC. OF DAMAGES THAT OCCURRED DURING SHIPPING YOU MUST DO SO WITHIN 48 HOURS OF RECEIPT OF GOODS.
MAD DOGG ATHLETICS, INC. RESERVES THE RIGHT TO REVIEW DEFECTIVE PART(S). ALL COSTS OF SHIPPING DEFECTIVE PART(S) TO AND FROM MAD DOGG ATHLETICS, INC. FOR INSPECTION SHALL BE BORNE SOLEY BY THE ORIGINAL PURCHASER. ANY REPAIR OR MODIFICATION OF DEFECTIVE PART(S) BY ANYONE OTHER THAN A MAD DOGG ATHLETICS, INC. A TECHICAL REPRESENTATIVE OR AUTHORIZED SERVICE PROVIDER WILL VOID THIS WARRANTY. IF MAD DOGG ATHLETICS, INC. DETERMINES, IN ITS SOLE DISCRETION, THAT IT IS IMPRACTICAL TO SHIP DEFECTIVE PARTS  BACK TO MAD DOGG ATHLETICS, INC., MAD DOGG ATHLETICS, INC. MAY DESIGNATE, IN ITS SOLE DISCRETION, A REPAIR FACILITY TO INSPECT AND ESTIMATE THE COST TO REPAIR SUCH DEFECTIVE PART(S). THE COST, IF ANY, OF SHIPPING DEFECTIVE PART(S) TO AND FROM SUCH REPAIR FACILITY AND OF SUCH ESTIMATE SHALL BE BORNE SOLELY BY THE ORIGINAL PURCHASER. DEFECTIVE PART(S) MUST REMAIN AVAILABLE FOR INSPECTION UNTIL THE CLAIM IS FINALIZED.  WHENEVER CLAIMS ARE SETTLED, MAD DOGG ATHLETICS, INC. RESERVES THE RIGHT TO BE SUBROGATED UNDER ANY EXISTING INSURANCE POLICIES THE CLAIMANT MAY HAVE.

LIMITATIONS AND EXCLUSIONS
THIS LIMITED WARRANTY DOES NOT APPLY TO COSMETIC DAMAGE, IMPERFECTIONS THAT ARE WITHIN DESIGN  SPECIFICATIONS THAT DO NOT MATERIALLY ALTER FUNCTIONALITY, OR DAMAGE DUE TO ACTS OF GOD, ACCIDENT, ABUSE, MISUSE, NEGLIGENCE, LACK OF NORMAL MAINTENANCE, ABNORMAL SERVICE OR HANDLING THAT DIFFERS FROM THAT SPECIFIED FOR THE SPORT LINE OF BIKES, IMPROPER INSTALLATION OR IMPROPER OPERATION. IN ADDITION, ALTERATION OR MODIFICATION OF THE PRODUCT.
DISCLAIMER OF WARRANTIES; LIMITATION OF LIABILITY
THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. REPAIR OR REPLACEMENT AS PROVIDED ABOVE SHALL BE THE SOLE AND EXCLUSIVE REMEDY AVAILABLE TO THE PURCHASER. CORRECTION OF DEFECTS, IN THE MANNER AND FOR THE PERIOD OF TIME DESCRIBED ABOVE, SHALL CONSTITUTE COMPLETE FULFILLMENT OF ALL LIABILITIES AND RESPONSIBILITIES OF MAD DOGG ATHLETICS, INC. TO THE PURCHASER WITH RESPECT TO CONTRACT,  NEGLIGENCE, ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES BASED UPON BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT OR OTHERWISE.
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF IMPLIED WARRANTIES OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE.

The Spinner® Elite is not for commercial use and is warranted for home use only.
Patents for this product are available at: www.spinning.com/patents
Copyright 2021 Mad Dogg Athletics, Inc. All rights reserved. SPIN®, Spinner®, Spinning®, Spin Fitness®, SPINPower® and the Spinning logo ® are registered trademarks that are owned by Mad Dogg Athletics, Inc.

SPINNING®
2111 Narcissus Court
Venice, CA 90291
Toll-free: 1.800.847.SPIN(7746)
Dialing outside U.S.:
1.310.823.7008
Fax: 1.310.823.7408
www.spinning.com
SPINNING® EUROPE
Scheldeweg 3
3144 Es Maassiuis
The Netherlands
Phone: +31 1059 04508 (EMEA)
[email protected]

SPINNING.COM
©2021 Mad Dogg Athletics, Inc. All rights reserved. Spin®, Spinner®, Spinning®, Spin Fitness®, SPINPower®and the Spinning ® logo ® are registered trademarks that are owned by Mad Dogg Athletics, Inc.
Designed and engineered in Venice, California. Made in China.

References

• Spinner® Bikes and Spinning® Instructor Education | For Studios, Instructors and Consumers
• Spinner® Bikes and Spinning® Instructor Education | For Studios, Instructors and Consumers
• Patents
• youtube.com/playlist?list=PLZwv65qs7XFRP_