4456-GA-CL-MWP 12 Light Chandelier
Product Information:
Model Number: 4456-GA-CL-MWP
Product Name: Lighting the Way for Sixty Years
Part Number: 4456-GA-CL-MWP
Recommended Bulb: 12-Candelabra Base Bulb, 40 Watts
Maximum Bulb Wattage: 60 Watts
Bulb Type: LED Bulbs (recommended for extended use)
Fixture Rating: Dry Rated
Warning: This product contains crystals and may expose you to
Lead, which is known to the State of California to cause cancer
and/or birth defects or reproductive harm. For more information,
visit www.P65Warnings.ca.gov
Product Usage Instructions:
- Before starting the installation, carefully check all parts and
components to ensure everything is present. - Screw the top glass dish and loop onto the coupling.
- Place the glass dish and small metal dish over the bottom metal
cover and secure them with the finial. - Safely attach the fixture into the outlet box.
- Install the bobeches and bulbs (not included) into their
designated positions. - Connect the power supply.
- To dress the fixture, start with the packet labeled (A).
- IMPORTANT: Apply crystal sets in alphabetical order according
to the provided crystal sets list.
Crystal Sets:
- A. 52 Sets – (1)14mm + AS20-2
- B. 4 Sets – AS20-2.5 (No Jewel)
- C. 12 Sets – (1)14mm + AS20-2.5
- D. 4 Sets – (2)14mm + AS20-2.5
- E. 24 Sets – (1)14mm + AS20-2.5
- F. 8 Sets – (14)14mm
- G. 1 Piece – (4)14mm + AS8-40mm Ball
Note: All electrical components must be installed by a licensed
electrician in accordance with the National Electric Code and the
appropriate local electrical codes.
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #4456-GA-CL-MWP
WARNING:
(4(A) CRYSTALS)
A B
C C
E GD
29″
DETAILED ILLUSTRATION
Electrical Danger Turn Power Off
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
C
U R
L
24″
A
You will need 12-Candelabra Base Bulb 40 Watts Recommended 60 Watts Max USE LED BULBS FOR EXTENDED USE
E E
F
The fixture is dry rated
How to Install
1.Do a complete inventory of all parts and components before you start installing.
2.Screw the top glass dish & Loop on the coupling. 3.Place the glass dish and small metal dish over the bottom
metal cover and secure with the finial. 4.After safety attaching fixture into outlet box, install
bobeches, bulbs (not included) and proceed to connecting the power. 5.When you begin to dress the fixture,start with packet labeled(A). 6.IMPORTANT: Apply crystal sets in alphabetical order.
A
B
C
D
E
F
G
Crystal Sets
A. 52Sets. (1)14mm + AS20-2″ B. 4Sets. AS20-2.5″(No Jewel) C. 12Sets. (1)14mm + AS20-2.5″ D. 4Sets. (2)14mm + AS20-2.5″ E. 24Sets. (1)14mm + AS20-2.5″ F. 8Sets. (14)14mm G.1Piece. (4)14mm + AS8-40mm Ball
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm. For more information go to www.P65Warnings.ca.gov
Outlet box A B C E F G H I J
L
X Y Z
LIGHTING THE WAY FOR SIXTY YEARS PART NUMBER MODEL #4456-GA-CL-MWP
D
P Q
S T U V
Part Number
Part Numbers
A. (2)-Wire Connector B. (1)-Mounting Plate C. (2)-Outlet Box Screws D. (1)-Lock Washer E. (1)-Hex Nut F. (1)-Nipple G. (1)-Canopy; w5″ x h1″ (XFB4454GACAN5IN) H. (1)-Collar Ring I. (1)-Collar Loop J. (1)-Chain; 72″, 4mm (XFB4454GACHA4MM) K. (1)-Ground Wire L. (1)-Loop M. (1)-Top Glass Dish Ø4″, 13mm hole, 4pin(XFB4456DIBOB4IN) N. (1)-Metal Dish O. (1)-Thread P. (1)-Metal Sleeve Q. (2)-Metal Dish R. (1)-Glass Column S. (1)-Frame T. (1)-Middle Glass Dish Ø4″, 11mm hole (XFB4455DIBOB4IN) U. (2)-Metal Dish V. (2)-Finial (XFB4454CHFIN) W. (1)-Bottom Glass Dish; Ø4″, 11mm hole, 4pin (XFB4454GABOB4IN) X. (12)-Candle Sleeve; h3″ (XFB4452GACDL3IN) Y. (12)-Bobeche; Ø4″, 24mm hole, 4pin (XFB4454GABOB4IN) Z. ( )-Rosette
PART BAG: Includes Parts A, C
PART BAG : Includes Parts B, D, E, F, H, I
P65Warnings.ca.gov
