82993 Surface Downlight
Product Information: LED 4 Surface Downlight Model 82993
The LED 4 Surface Downlight Model 82993 is a lighting fixture
that is designed to be installed on a surface, such as a ceiling or
wall. The downlight features LED technology, which provides bright
and efficient lighting while consuming less energy than traditional
light bulbs. The product comes with installation instructions and
should be installed by a qualified electrician.
Product Usage Instructions
Step 1: Ensure that the power to the
installation area is turned off before beginning installation.
Step 2: Carefully remove the downlight from its
packaging, taking care not to damage any components.
Step 3: Connect the downlight’s wiring to the
wiring in the installation area. The wiring should be connected
according to the instructions provided by the manufacturer.
Step 4: Secure the downlight to the surface
using the mounting hardware provided. Make sure that the downlight
is securely fastened and level.
Step 5: Turn on the power and test the
downlight to ensure that it is functioning properly.
Note: If you are not familiar with electrical
work, or if you are unsure about any aspect of the installation
process, consult a qualified electrician for assistance.
WARNING: To reduce the risk of fire or electric
shock, do not attempt to install this product without following the
instructions carefully. This product should only be installed by a
qualified electrician.
LED 4″ Surface Downlight Installation
Instructions- Model 82993
®
Please read carefully and save these instructions, as you may need them at a later date. 1.INSTALLATION OR ASSEMBLY INSTRUCTIONS WIRING INSTRUCTIONS THAT SPECIFY THE PROPER METHOD OF CONNECTING THE GROUNDING MEANS AND MAINTAINING POLARITY SHALL BE INCLUDED WITH THE LUMINAIRE IN A MANNER THAT WILL REQUIRE THE INSTALLER TO HANDLE THE INSTRUCTIONS DURING INSTALLATION. 2.”THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED” and “CE PRODUIT DOIT ETRE INSTALLE SELON LE CODE D’INSTALLATION PERTINENT, PAR UNE PERSONNE QUI CONNAi BIEN LE PRODUIT ET SON FONCTIONNEMENT AINSI QUE LES RISQUES INHERENTS« 3.”CONSUL TA QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT CONDUCTOR” and “CONSULTER UN ELECTRICIEN QUALIFIE POUR VOUS ASSURER QUE LES CONDUCTEURS DE LA DERIVATION SONT ADEQUATS”
WARNING- RISK OF FIRE OR ELECTRIC SHOCK
·DO NOT MAKE OR ALTER ANY OPEN HOLES IN AN ENCLOSURE OF WIRING OR ELECTRICAL COMPONENTS DURING LAMP INSTALLATION. ·TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR OTHER SHARP OBJECTS. ·SUITABLE FOR WET LOCATIONS. ·SUITABLE FOR TYPE IC OR SUITABLE FOR TYPE NON-IC. ·THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS.
ASSEMBLY AND INSTALLATION
This IC/AT fixture is intended for use in suspended ceilings (with or without insulation). 1.Shut off the power before installation. 2.Fix the bracket to the junction box with screws. 3.Remove the Lens by turning it counter clockwise (FIG.1) 4.Adjust the color to desired one,by sliding the selector switch. (FIG.2) 5.Connect the wires: Black to Black, White to White, Green to Green. Secure the connection with Wire Nuts. Tuck all the wires into the Outlet box.(FIG.3) 6.Align two holes in the fixture with Outlet box. Use screws to attach one to another. Do not over tighten. (FIG.4) 7.Place the Lens back and turn it clockwise to fix.(FIG.5) 8.Complete the installation by pushing the fixtures into the ceiling. Caulk the space between the wall and the Shell. (FIG.6)
