Ez Tattoo P3 Wireless Pen Machine User Manual

Make easy tattooing
P3 WIRELESS PEN MACHINE

OVERVIEW

SIX OPTIONS ADJUSTABLE STROKE OLED DIGITAL DISPLAY
TWO PRESET VOLTAGE MEMORY FUNCTION
BULIT-IN TIMER POSH MODE

P3 allows artist quickly adjust needle stroke, Hold the machine body and twist innerring part. Each “click” show stroke length

SPECIFICATIONS

BASIC OPERATION

Power ON/OFF
Press and Hold the button for two seconds to turn P3 ON.
Press and Hold the button for two seconds to turn P3 OFF.

Power START/ STOP
Clik button to turn your machine Start or Stop.
Adjusting Voltage
Press + or – to adjust in 0.1V increments.
Press and Hold + or – to quickly adjust the voltage in 0.1V increments.
Start/ Stop Bulit-in Timer
Press + button to active your machine ON, the timing mode start.
Note: timer mode record in minutes, the maximum recording time is 999 minutes. the time is counting only when machine is running. The timer will reset the count when the P3 is being restarted.
Changing Voltage Preset
DblClick button P3 will toggle between the voltage presets.

1. Screen display “Lnr” preset LINER voltage.
2. Screen display “Shd” preset SHADER voltage.
   Note: The P3 will adjust the voltage to the saved voltage setting you stop on, the machine startup voltage is the preset for the last shutdown.

Push Mode
Press + and – button at the same time, Screen LOGO solid, the machine ACTIVE the strong start mode.
Press + and – button at the same time, Screen LOGO flashes, the machine push mode OFF.
Note: In push mode the initial voltage output is 12V lasts for 1 second and then returns to normal voltage after.
Display
Voltage, Capacity and Timer display alternately every 5 seconds under the machine working condition.
NOTICE:
To reduce the risk of injury, the user must read and understand the User manual before using this product, Save these instructions for future reference.
-We recommended that use the included charging cable.
-This device don’t support fast charging/super fast charging, Fast charging may get damage the battery.

BATTERY PROTECTION

The battery circuitry protects the battery pack from extreme temperature, overdischarge, and over-charge.
To protect the battery from damage and prolong its life, The battery pack circuitry will turn off the battery pack if it becomes overloaded or if the temperature becomes too high during use. This may happen in extremely high torque, binding, and stalling situations. The battery pack will shut down for 10s when its operating temperature exceeds 158°F (70°C), and will begin normal operation when it returns to 152°F (67°C).
NOTICE: A significantly reduced run time after fully charging the battery pack indicates that the batteries are near the end of their usable life and must be replaced.
NOTICE: Lithium-ion battery packs are shipped partially charged. Before using it the first time, fully charge the battery pack.

WARRANTY INFORMATION

If you find that the product is malfunctioning during the warranty period, EZ provides a one-year warranty or the P3 wireles pen machine purchased in our online store or authorized distributors worldwide form the date of purchase. Warranties do not cover:
Damage to the product due to a human factor. Product damage due to axterrnal electrical failure or any accident.
WARRANTY CARD
PRODUCT NAME:____________
DATE OF PURCHASE:_________
WHERE PURCHASED:_____
ADDRESS:________________
EMALL:___
MY SIGNATURE BELOW ACKNOWLEDGES THAT I HAVE READ, FULLY UNDERSTAND，AND ACCEPT THIS LIMITED WARRANTYAGREEMENT.
SIGNATURE:_________________DATE:______________
SENT THIS COPY TO: EZTATTOO-AFTER-SALES DEPARTMENT 4/F BUILDING 7(7DONG) NO.289 FAHUA NORTH ROAD
JINYI NEW DISTRICT JINHUA 321036 ZHEJIANG CHINA
TEL: +86-153-9755-3908
EMAIL: [email protected]

Thank you for reading!
WWW.EZTATTOOSUPPLY.COM
@EZTATTOO OFFICAL
Created and Manufactured in China by EZ
WWW.EZTATTOOSUPPLY.COM
Created and Manufactured in China by EZ

References

• EZ TATTOO SUPPLY