LOWES U3218C Stylish Bright Undermount
Installation Guide
Templates are supplied only as a guide. The physical use of the sink will a more accurate cutout.
Positive Reveal -The countertop edge sits approximately 1/4″ back from the edge of the sink, exposing the sink rim.
Zero Reveal -The countertop meets the edge of the sink, fitting flush with the sink bowls.
Negative Reveal -The countertop extends over the edge of the sink on all sides by approximately 1/4″. Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly.
Templates are supplied only as a guide. The physical use of the sink will ensure a more accurate cutout.
Zero Reveal – The countertop meets the edge of the sink, fitting flush with the sink bowls.
Negative Reveal – The countertop extends over the edge of the sink on all sides by approximately 1/8″. Use caution with this installation to be sure that accessories such as colanders or cutting boards will fit properly.
IMPORTANT!
Read information below before proceed
- Recommended that undermount sinks and routering of your solid surface material should be installed by a professional installer for best results.
- Requirements vary for installation in a granite, marble, stone, or butcher block countertop. Please contact your fabricator for specific details.
- Protect the entire surface of the product during installation to prevent damage.
- Before installing, inspect the sink for damage. Do not install a damaged unit.
- Remember, it is your responsibility to follow all local plumbing and building codes.
- The warranty will be voided if these installation instructions are not followed.
