Eleiko 3060360 Insert Platform Instruction Manual (+ PDF)

Contents hide

1 3060360 Insert Platform

2 Product Information: Eleiko Insert Platform

2.1 Safety Instructions

2.2 Preventative Maintenance & Inspections

2.3 Warranty

2.4 Assembly Instructions

2.5 Documents / Resources

2.5.1 References

3060360 Insert Platform

Product Information: Eleiko Insert Platform

The Eleiko Insert Platform is a weightlifting accessory that can
be used with the XF 80 and Classic Line Half Rack (Art.nr 3060360)
and XF 80 Power Rack (Art.nr 3002563). It has a product weight of
85 kg / 187 lbs and dimensions of 2446 x 2280 x 30 mm /96.3 x 89.8
x 1.2. The platform includes rubber tiles, wooden plates, screws,
brackets, and square tubes.

It is important to read the safety instructions, preventative
maintenance and inspection guidelines, warranty information, and
assembly instructions before using the platform.

Safety Instructions

Read all included warnings and instructions before use.
Get a medical examination and proper instructions before
use.
Do not use equipment that appears to be damaged. Consult an
ELEIKO technician before attempting any repairs.
Do not replace components with non-ELEIKO equipment without
consulting an ELEIKO representative.
Do not overload the equipment or exceed personal strength
levels.
Supervise children under the age of 14.
Do not remove safety labels from the equipment. Replace damaged
labels immediately.

Preventative Maintenance & Inspections

Regularly clean the surfaces on frames and tubes from dust and
dirt. Check that all bolts between parts and floors are properly
tightened, according to recommendations.

Warranty

All products manufactured by ELEIKO are warranted to the
original purchaser to be free from defects in workmanship and/or
materials under normal use or service for 2 years. Normal wear and
tear does not fall under the warranty of two years.

Assembly Instructions

Ensure the equipment is installed and used in a place whose
access and supervision are specifically controlled by the
owner.
Install the equipment on a stable base and properly level the
equipment. ELEIKO recommends that all equipment is secured to the
floor and installed by a licensed contractor or an
ELEIKO-installer.
Instruct all users and supervising personnel on proper usage of
the equipment.
Use each equipment as it is intended for.
Ensure that all included parts are present and accounted
for.
Use the hex key size 5 to assemble the platform according to
the included assembly instructions.
Refer to the general torque table for different threads when
tightening screws/nuts. Use these torques if nothing else is
set.

View Fullscreen

ELEIKO INSERT PLATFORM
Art.nr 3060360 / 3002563

READ BEFORE INSTALLATION AND USE
CAUTION
The equipment must be installed and used in a place whose access and supervision are specifically controlled by the owner.
Be sure to install the equipment on a stable base and properly level the equipment. ELEIKO recommends that all equipment is secured to floor and installed by a licensed contractor or an ELEIKO-installer.
SAFETY INSTRUCTIONS
It is the responibility of the purchaser of ELEIKO products to instruct all users and supervising personnel on proper usage of the equipment.
1. All included warnings (labels) and instructions MUST be read before the use of any ELEIKO-equipment. Use each equipment as it is intended for.
2. A user MUST get a medical examination and proper instructions before the use of any ELEIKO-equipment.
3. DO NOT let anyone, under any cuircumstances, use equipment that appears to be damaged. Do not try to repair any equipment before consulting an ELEIKO technician.
4. DO NOT replace the components of ELEIKO-equipment with other none ELEIKOequipment (magnetic safety pin, frames, bars), do not improvise. If there are any doubts consult an ELEIKO representative prior to any intervention.
5. DO NOT overload the equipment and DO NOT try to exceed personal strength levels.
6. Children under the age of 14 must be supervised by an adult.
7. DO NOT remove any safety labels from the ELEIKO-equipment. ELEIKO is not responsible if a label is removed. Replace damaged labels immediately.
PREVENTITIVE MAINTENANCE & INSPECTIONS
REGULARLY: Clean the surfaces on frames and tubes from dust and dirt. Check that all bolts between parts and floors are properly tightened, according to recommendations.
WARRANTY
All products manufactured by ELEIKO are warranted to the original purchaser to be free from defects in workmanship and / or materials under normal use or service as follows: 2 years Normal wear and tear does not fall under the warranty of two years.
ADDITIONAL INFORMATION
This equipment is for indoor use only.
As the the rubber tiles have a tolerance of +/- 1% there could be a small difference in size between them. It is OK to carefully cut the rubber tiles if needed in order to make them equal in size.

PRODUCT SPECIFICATIONS
Insert platform for XF 80 and Classic Line Half Rack (3060360) and XF 80 Power Rack (3002563).

Product weight Dimensions (L x W x H)

85 kg / 187 lbs 2446 x 2280 x 30 mm /96.3″ x 89.8″ x 1.2″

FOOTPRINT AREA

1500

2280

Add sufficient clearance, not less than 1,5 m on all sides.

1500

2446

1500

CONTENTS

x1 x2
Rubber tile
x6

wooden plate
x32
screw M8x12

corner
x2

bracket

top bracket

CONTENTS

Square tube 30x30x2 L=2368
x1
Square tube 30x30x2 L=968

x2
Square tube 30x30x2 L=988

x1
Square tube 30x30x2 L=691
x1
Square tube 30x30x2 L=1205

REQUIRED TOOLS
– Hex key size 5

GENERAL
The table below is general torque to use for different threads. Use these torques, if nothing else is set. Below numbers are for screw/nut of quality 8.8.

THREAD M8

TORQUE (Nm / ftlb) Quality 8.8 24 / 17,7

ASSEMBLY INSTRUCTIONS

x24

corner

bracket

screw M8x12

Loose screws!
Bracket

Screw Corner

top bracket

bracket

screw M8x12