76383 Cyclo 2 Recessed Downlight
Product Information
The product is a Cyclo 2 Recessed light with an LED module (SMD)
that consumes 2W of power and has a color temperature of 6500K. It
has an IP rating of 20 and operates on a voltage of 220-240V~50Hz.
The product is manufactured in the UK by BH17 7BY and in the EU by
Brilliant AG, Brilliantstrasse 1, D-27442 Gnarrenburg. The product
comes with an instruction leaflet that provides information on
battery replacement, recycling advice, fitting/replacing bulbs,
safety information, and specification.
Product Usage Instructions
If the lamp does not remain lit for the three-hour period after
routine operation check, you may need to replace the battery pack.
To replace the battery pack, follow the instructions provided in
the instruction leaflet.
Before changing lightbulbs or cleaning the product, always
switch off the power supply to ensure safety. The product is a
Class 1 product and must be earthed by an electrician. Live
voltages may be present in the unit even when turned off or
completely disconnected. If you need to make any electrical
connections, consult an electrician.
The product does not require frequent maintenance. However, if
you need to fit or replace bulbs, refer to the instruction leaflet
for guidance. The instruction leaflet also provides recycling
advice to dispose of the product safely.
Battery Replacement
If after routine operation check, the lamp does not remain lit for the three hour period, a new battery pack may be required.
Instruction leaflet
Cyclo 2 Recessed
Fitting/replacing bulbs
Recycling advice
Safety information
Live Voltages may be present in this unit even when turned off or when completely disconnected. For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
UK Manufacturer: BH17 7BY EU Manufacturer: Brilliant AG, Brilliantstrasse 1, D-27442 Gnarrenburg
www.saxbylighting.com
V4 21/05/2023 Saxby Lighting
Warning
This is a Class 1 product and must be earthed.
electrician.
connections.
persons cannot restore the electrical supply without your duration timed switches.
Specification
Voltage: 220-240V ~ 50Hz 2W LED Module (SMD), 6500K
IP rating: 20
Operating Temperature : -0°C to 55°C
Layout
Change over Time: <1s Battery Specification: 3.7V 1800mAh Li-ion Battery Charge Time: 24 hours Battery warranty: 2 years
Installation
carefully note the position of each set of wires.
surface.
Wiring
B A C
PUSH DOWN
Check that…
Commissioning
to secure.
block. is now ready for use.
hole, then push the unit up until firmly in position,
Saxby Lighting - Commercial and Domestic Lighting Supplier
