74707 ShieldECO 800 Downlight
Product Information
The product is the ShieldECO 800, a lighting fixture that is
designed for use in various indoor spaces. It is a Double Insulated
product, which means it does not require connection to an Earth
circuit. The product is also suitable for covering with insulation
up to a thickness of 270mm.
Product Usage Instructions
1. Safety Precautions:
- Always switch off the power supply before changing lightbulbs
or cleaning the fixture.
2. Fitting/Replacing Bulbs:
- Ensure that the power supply is switched off.
- Locate the bulbs that need to be fitted or replaced.
- Carefully remove the old bulbs, if present, by twisting them
counterclockwise. - Insert the new bulbs by twisting them clockwise until securely
in place.
3. Recycling Advice:
Follow local regulations and guidelines for the proper disposal
or recycling of the product and its components. Do not dispose of
the product in regular household waste.
4. Ceiling Preparation:
- Before installation, carefully note the position of each set of
wires on the ceiling.
5. Wiring:
- Insert the cable with an Earth wire (green/yellow) for
termination. - Loop the cable and push it down securely.
Note: For more detailed instructions or specific information
about installation, refer to the complete user manual provided with
the product.
Check that… Commissioning
ShieldECO 800
Fitting/replacing bulbs
Recycling advice Safety information
For your safety, always switch off the power supply before changing lightbulbs, or cleaning.
V7 27/11/2019
Warning
This product is Double Insulated and does not require connection to an Earth circuit.
This product is suitable for covering with insulation 270mm.
Specification
Layout
2.25m Zone 1 0.6m Outside zones
Zone 2
0.6m
Zone 2
Ceiling Preparation
of wires
carefully note the position of each set
Wiring
INSERT CABLE EARTH (GREEN/YELLOW) FOR TERMINATION
LOOP
PUSH DOWN
