HAY-1402-AG Two Light Wall Mount
Product Information: – Model: #HAY-1402-AG –
Product Name: Lighting the Way for Sixty Years – Assembly Required:
Yes – Electrical Components: Must be installed by a licensed
electrician in accordance with the National Electric Code and
appropriate local electrical codes. – Bulb Type: 2-Candelabra Base
Bulbs (not included) – Recommended Bulb Wattage: 40 Watts – Maximum
Bulb Wattage: 60 Watts – LED Bulbs: Recommended for extended use –
Fixture Rating: Dry rated Product Usage
Instructions: 1. Before starting the installation, do a
complete inventory of all parts and components to ensure everything
is available. 2. Safely attach the fixture into the outlet box. 3.
Install the bulbs (2-Candelabra Base Bulbs) into the fixture. 4.
Connect the power after installing the bulbs. 5. Begin dressing the
fixture with the crystals. 6. Start with crystal labeled (A) and
apply crystal sets in alphabetical order. 7. Crystal Sets: – A: 5
Sets (22x360mm) – B: 7 Sets (22x280mm) – C: 9 Sets (22x200mm) 8.
After dressing the fixture with crystals, ensure that the short end
is positioned above the frame. 9. Follow the detailed illustration
for proper alignment and placement of parts. 10. Use the provided
part numbers to identify and locate specific parts during assembly:
– A: (2)-Wire Connector – B: (1)-Mounting Plate – C: (2)-Outlet Box
Screws – D: (1)-Ground Wire – E: (1)-Backplate; w4.375 x 7 x h0.75
(XFB1402AGBKP4.375IN) – F: (1)-Frame – G: (2)-Ball Nut
(XFB1402AGBANUT) 11. Ensure that all electrical components are
properly installed by a licensed electrician, following the
National Electric Code and local electrical codes. 12. Once the
installation is complete, turn on the power to activate the
fixture. Note: Always exercise caution when dealing with electrical
components. If you are unsure about any aspect of the installation
process, consult a licensed electrician for assistance.
LIGHTING THE WAY FOR SIXTY YEARS ASSEMBLY INSTRUCTION MODEL #HAY-1402-AG
WARNING:
Electrical Danger Turn Power Off
All electrical components must be
installed by a licensed electrician
in accordance with the National
Electric Code and the appropriate
local electrical codes.
C
U R
L
C
7.5″ 4.375″
4.75″
4.75″
7.5″
DETAILED ILLUSTRATION
You will need 2-Candelabra Base Bulb
40 Watts Recommended 60 Watts Max
USE LED BULBS FOR EXTENDED USE This fixture is Dry rated
How to Install
1. Do a complete inventory of all parts and components before you start installing.
2. After safety attaching fixture into outlet box,install bulbs (not included) and proceed to connecting the power.
3. When you begin to dress the fixture,start with crystal labeled (A).
4. IMPORTANT: Apply crystal sets in alphabetical order.
Crystal Sets
A. 5Sets. B. 7Sets. C. 9Sets.
(1)22x360mm (1)22x280mm (1)22x200mm
Short end above frame
LIGHTING THE WAY FOR SIXTY YEARS
PART NUMBER MODEL #HAY-1402-AG
Part Number
Part Numbers
A. (2)-Wire Connector B. (1)-Mounting Plate C. (2)-Outlet Box Screws D. (1)-Ground Wire E. (1)-Backplate; w4.375″ x 7″ x h0.75″ ( XFB1402AGBKP4.375IN) F. (1)-Frame G. (2)-Ball Nut (XFB1402AGBANUT)
Outlet box A
C
