PT-PD208GT PoE Splitter
Product Information:
The PT-PD208GT is a single-port PoE splitter with a high-impact
metal shell. It acts as a converter, separating power and data from
the PoE source and delivering them to non-PoE devices. The device
has a DIP switch for adjustable output voltage of 12V and 24V. It
is designed to work with 25W non-PoE PDs such as power
communication stations, wireless APs, network cameras, and other
non-PoE terminals. The PT-PD208GT supports data speeds of
10/100/1000 Mbps.
It is powered by the IEEE802.3at standard PSE or PoE+ Switch at
30W. The effective distance for data transmission is 100 meters
over Cat5e/Cat6 cables from the data source to the terminal device.
The PT-PD208GT features an isolated design to prevent damage from
high current inputs. The model is easy to install with two mounting
holes.
The PT-PD208GT also provides surge protection with common mode
surge protection of 6kV (10/700us) and differential mode surge
protection of 1.5kV (10/700us).
Product Usage Instructions:
- Prepare the necessary tools, such as a screwdriver, ladder, and
Cat5e/Cat6 cables. - Visit www.procetpoe.com
for additional information or troubleshooting. - Ensure that the product is not discarded as unsorted waste but
sent to separate collection facilities for recovery and
recycling. - Connect the PT-PD208GT to a compatible IEEE802.3at standard PSE
or PoE+ Switch using a Cat5e/Cat6 cable. - Adjust the DIP switch on the PT-PD208GT to set the desired
output voltage (12V or 24V) based on your requirements. - Locate the non-PoE device that needs power and data
connectivity. - Connect the non-PoE device to the PT-PD208GT using a Cat5e/Cat6
cable. - Ensure that the GND Terminal on the PT-PD208GT is properly
connected to the ground. - Securely mount the PT-PD208GT using the provided mounting
holes. - Power on the IEEE802.3at standard PSE or PoE+ Switch.
- Verify that the non-PoE device receives power and data
connectivity.
www.procetpoe.com
This docum ent belongs to PROCET com pany. It is not allowed to reproduce and m odify without the original author’s perm ission. It is PROCET’s policy to im prove its products as new technology, com ponents, software, and firm ware at any tim e. PROCET, therefore, reserves the right to change specifications without prior notice. Please follow WEEE (Wast e Elect rical and Elect ronic Equipm ent ) disposal instructions for old electronic products. Please do not dispose of the old product in your general household waste bin.
The sym bol indicates that the product should not be discarded as unsorted waste but m ust be sent to separate collection facilities for recovery and recycling.
©
The installation Guide for PT-PD208GT and m ainly introduces the hardware specification, installation m ethods, and precautions of the installation. There m ay be differences in the appearance and configuration from other m odels. All product im ages in this m anual are for illustration purposes only and m ay differ from the actual product. This m anual includes the following chapters: 1. Product Introduction. Including the basic functions and specification of PT-PD208GT, as well as the product appearance and applications introduction. 2. Installation Introduction. Introducing the preparation work and precautions before installing the product. 3. Product Installation. Two m ethods of product installation.
n A Field Technicians
ing Slot-Fasten m ounting
PT-PD208GT is a single-port PoE splitter with a high-impact metal shell. It works as a convert er separat ing power and dat a from t he PoE source and t hen delivering power and dat a t o non- PoE devices. DIP swit ch for 12V and 24V adjust able out put volt age. Working for 25W non- PoE PDs, such as power communication stations, wireless APs, network cameras, and other non-PoE terminals. Supporting 10/ 100/ 1000M bps of data speed.
It is powered by IEEE802.3at st andard PSE or PoE+ Swit ch at 30W. The effective distance is 100 meters over Cat5e/ Cat6 cables from data source to terminal device. Isolated design inside to avoid high current input damage. The model is easy to install with two mounting holes.
Up p er
g hole
Up p er
for GND Term inal
U2
S
Protected line:1,2,3,4,5,6,7,8
P
Com m on m ode surge protection(10/ 700us): 6kV
Differential m ode surge protection (10/ 700us): 1.5KV
art
art
:
:
:
:
5
should be prepared by yourself m,
, and l ad d er
!
OLink POWER
DC
into the
!
5e
poe
slot-fasten m ounted ing
3-1
F
p
e int
n
· K · ·
3-3
– f ast en – f ast en
-fasten M ounting
– f ast en
P pa
!
GND Term inal
· ·
t
fi
POE Injector, POE Switch, POE Splitter, POE Surge Supplier
