Installer Friendly Series Single Phase Duplex
Product Information
The product is a Demand Dose or Timed Dose, Float or C-LevelTM
Sensor Controlled System for Pump Control and System Monitoring. It
comes with a panel that can be easily changed in the field to
utilize either floats or the patented C-LevelTM sensor for
continuous level monitoring. The C-LevelTM sensor senses the level
in the tank and sends a signal to the panel. The pump activation
levels can be adjusted using the LCD interface. The C-LevelTM CL40
sensor has an operating range of 3-39.9 inches (7.6-101.3 cm),
while the C-LevelTM CL100 has an operating range of 3-99.5 inches
(7.6-252.7 cm). The C-LevelTM Sensor features a five-year limited
warranty.
Product Usage Instructions
- Choose between using floats or the C-LevelTM sensor for
continuous level monitoring. - If using the C-LevelTM sensor, ensure that a secondary device,
such as a float switch, is used for redundant activation of the
high-level alarm and pump shut off. - Adjust the pump activation levels by using the LCD
interface. - Connect the C-LevelTM sensor or floats to the panel using the
provided terminal blocks. - Ensure that the circuit breakers are properly connected to
provide pump power disconnect and branch circuit protection. - Refer to the pricing worksheet and options list to select
additional features and accessories for your specific needs.
INSTALLER FRIENDLY SERIES® (IFS) SINGLE PHASE DUPLEX
Demand Dose or Timed Dose, Float or C-LevelTM Sensor Controlled System for Pump Control and System Monitoring
2 1
3
Installer Friendly Series®
Panel layout may vary with options. Reg. Cdn Pat. & TM Off C-LevelTM Sensor US Patent No. 8,336,385; 8,567,242; 8,650,949
The Next Generation IFS duplex control panel utilizes an innovative circuit board design enclosed in a touch-safe housing to control two 120/208/240V single phase pumps in water and sewage applications. These newly redesigned IFS panels feature an easy-to use color LCD interface located on the inner door for programming and system monitoring. The panel configuration can be easily converted in the field to either a timed dose or demand dose through the LCD interface. Available with the EZconnex® float system.
The panel can easily be changed in the field to utilize either floats or the patented C-LevelTM sensor for continuous level monitoring. The C-LevelTM sensor senses the level in the tank and sends a signal to the panel. Pump activation levels can be adjusted by using the LCD interface. C-LevelTM CL40 sensor operating range is 3-39.9 inches (7.6-101.3 cm). C-LevelTM CL100 operating range is 3-99.5 inches (7.6-252.7 cm). The C-LevelTM Sensor features a five year limited warranty.
LCD INTERFACE FEATURES
· Full color graphics and menu navigation encoder for easy setup · Touch safe housing · Pump Hand/Off/Auto Control selectable via menu navigation · C-LevelTM Sensor or Float operation selectable via menu navigation · Demand or Timed Dose operation selectable via menu navigation · Tank Level Indication and setpoint monitoring at-a-glance
· Lead pump is easily identified by a graphic ring around the current lead pump regardless of control mode (timed dose or demand)
· Displays remaining time in each active ON or OFF Timed Dose mode, as well as at-a-glance ON or OFF time elapsed graphic around lead pump
· RJ45 communication connector
· Flashing function for alarm beacon and horn (configurable) · Manual alarm reset (configurable)
45
COMPONENTS
1. Enclosure measures 12 x 10 x 6 inches (30.48 x 24.4 x 15.24) NEMA 4X (ultraviolet stabilized thermoplastic, padlockable with integral mounting flanges, drip shield, heavy duty cover latches, and stainless steel ¼ turn set screw; for outdoor or indoor use)
2. Red Alarm Beacon provides 360° visual check of alarm condition
3. Circuit breakers provides pump power disconnect and branch circuit protection included as standard on all panels
4. C-LevelTM Sensor and float connection terminal blocks 5. Controller Features:
a. Incoming Control/Alarm Power terminal blocks b. Control/Alarm Power/System Status green LED
indicators illuminate if control/alarm power is present and controller is operating* c. Controller status green LED indicators for: Power/Active, Float Input Status, Pump Run, C-Level Active* d. Normally open auxiliary alarm contacts included as standard e. Control Power On/Off switch f. Green LED Pump Run indicators illuminate when pump is called to run* g. Control panel able to operate if LCD interface fails or is disconnected h. Touch safe housing 6. Alarm Horn provides audible warning of alarm condition (not shown) 7. Exterior Alarm Test/Silence push button allows horn and light to be tested and horn to be silenced in an alarm condition; alarm automatically resets once alarm condition is cleared (not shown) 8. Modbus Port (RJ45) for future expansion – eg. seal fail modules, remote monitoring, valve control, In-Site®, logging, etc. (not shown) *In fault condition, LED indicators will be red. Note: Added options, voltage, and amp range selected may change enclosure size and enclosure features, and component layout. Note: Schematic/Wiring Diagram and Pump Specification Label are located inside the panel.
9500054N-WEB Rev 01/23 © 2020 SJE, Inc. All Rights Reserved. SJE Rhombus is a trademark of SJE, Inc.
www.sjerhombus.com · Toll Free 888-342-5753
B.13
Installer Friendly Series®
PRICING WORKSHEET
INSTALLER FRIENDLY SERIES® SINGLE PHASE DUPLEX – Demand or timed dose float controlled system for pump control and system monitoring.
IFN
CONTROL PANEL
4
MODEL TYPE
1
ALARM PACKAGE
W
ENCLOSURE RATING
1
STARTING DEVICE
PUMP FULL LOAD AMPS
4
PUMP DISCONNECTS
FLOAT SWITCH APPLICATION
6A8AC10E
OPTIONS (LISTED BELOW)
CONTROL PANEL 3 IFN
MODEL TYPE
3 4 Single Phase Duplex (includes Options 6A, 8AC and 10E as standard)
ALARM PACKAGE 3 1 Alarm Package (includes test/normal/silence switch, fuse, red light, & horn)
ENCLOSURE RATING 3 W Weatherproof, NEMA 4X (engineered thermoplastic)
STARTING DEVICE 3 1 120/208/240V
PUMP FULL LOAD AMPS
0 0 – 7 FLA 1 7 – 15 FLA 2 15 – 20 FLA
PUMP DISCONNECTS 3 4 Circuit Breaker 120/208/240V
Floats – Pump Down (select Option 17 below) H Timed dose = redundant off, timer enable, alarm / Demand dose = stop, start, alarm (all
systems will ship with 3 floats by default)
FLOAT SWITCH APPLICATION
E
EZconnex® Float Switch System (select Option 33 or 35 below)
X No Floats
C
C-LevelTM Sensor (select Option 24 or 29) Select Option 3E and/or 4D for high water alarm and/or redundant off floats
$1,599.00 Base Base Base Base Base
$129.00 Base
Base
– $102.00
– $102.00
– $102.00
IFS Duplex Base Price $1,599.00 Alarm Package Enclosure Rating Starting Device
Pump Full Load Amps Pump Disconnects
Float Switch Application Total Options
TOTAL LIST PRICE
NOTE: Pump down applications only. Industry practices suggest that a secondary device, such as a float switch, be used for redundant activation of the high level alarm and pump shut off when using the C-LevelTM sensor.
OPTIONS 1J Duo Alarm Inputs
DESCRIPTION
3E
High Water Alarm Float (must also select Option 17) Only Available with Float Switch Application = C
4D
Redundant Off Float (must also select Option 17) Only Available with Float Switch Application = C
3 6A Auxiliary Alarm Contact, Form C included as standard)
Display Board – Includes: ETM Counter, Events (Cycles) 3 8AC Counter, Alarm Counter, and Override Counter (Timed Dose
Only) (included as standard)
3 10E Lockable Latch – NEMA 4X (included as standard) 10F Lightning Arrestor (must also select Option 15A) 10K Anti-condensation Heater (must also select Option 15A) 11C Additional NEMA 1 Remote Alarm Panel 11D Additional NEMA 4X Remote Alarm Panel 15A Control/Alarm Circuit Breaker 16A 10′ Cord in Lieu of 20′ Cord (per Float) 16B 15′ Cord in Lieu of 20′ Cord (per Float) 16C 30′ Cord in Lieu of 20′ Cord (per Float) 16D 40′ Cord in Lieu of 20′ Cord (per Float)
LIST PRICE $34.00
$34.00
$34.00
$0.00
$0.00
$0.00 $285.00 $124.00 $114.00 $368.00 $112.00 – $3.00 – $2.00 $6.00 $18.00
OPTIONS 17C 17D 17G 17H 17J
DESCRIPTION Sensor Float® / Internally Weighted (per Float) – Mercury Sensor Float® / Externally Weighted (per Float) – Mercury SJE MilliAmpMasterTM / Pipe Clamp (per Float) – Mechanical SJE MilliAmpMasterTM / Externally Weighted (per Float) – Mechanical Sensor Float® / Pipe Clamp (per Float) – Mercury
LIST PRICE $13.00 $15.00 $0.00 $8.00 $6.00
19F
4th Float for Timer Override or Lag Only Available with Float Switch Application = H
$34.00
24E 24F 24G 24H 24X 29A 29B 29X 33D 33E 33G 33H 35D 35E 35G 35H
C-LevelTM CL40 Sensor with 4′ Vent Tube and 20′ Cord C-LevelTM CL40 Sensor with 4′ Vent Tube and 40′ Cord C-LevelTM CL40 Sensor with 8′ Vent Tube and 20′ Cord C-LevelTM CL40 Sensor with 8′ Vent Tube and 40′ Cord No C-LevelTM CL40 Sensor C-LevelTM CL100 Sensor with 10′ Vent Tube and 20′ Cord C-LevelTM CL100 Sensor with 10′ Vent Tube and 40′ Cord No C-LevelTM CL100 Sensor EZconnex® 3-Port, 25′, with 10′ Floats (3) / Pipe Clamp EZconnex® 3-Port, 50′, with 10′ Floats (3) / Pipe Clamp EZconnex® 3-Port, 25′, with 20′ Floats (3) / Pipe Clamp EZconnex® 3-Port, 50′, with 20′ Floats (3) / Pipe Clamp EZconnex® 4-Port, 25′, with 10′ Floats (4) / Pipe Clamp EZconnex® 4-Port, 50′, with 10′ Floats (4) / Pipe Clamp EZconnex® 4-Port, 25′, with 20′ Floats (4) / Pipe Clamp EZconnex® 4-Port, 50′, with 20′ Floats (4) / Pipe Clamp
$349.00 $384.00 $354.00 $390.00 $0.00 $359.00 $396.00 $0.00 $313.00 $355.00 $337.00 $379.00 $442.00 $496.00 $473.00 $526.00
EZconnex® mechanically-activated, narrow angle float switches with quick release connections
B.14
www.sjerhombus.com · email: [email protected]
Home - SJE Rhombus Control Products
