F52315-11i 5-Light Kitchen Island Linear Pendant Chandelier
Product Information
The product is a light fixture that comes with a set of assembly
instructions and hardware. The hardware includes screws, nuts,
washers, stems, swivels, ceiling plate, baseplate, lanyards, ground
wire, mounting unit, wood screws, wall anchors, wire nuts, and
decorative nuts. The product requires tools such as a ladder,
safety glasses, electrical Phillips screwdriver, flat blade
screwdriver, pliers, wire strippers, and tape for assembly. The
assembly instructions include nine steps that guide the user
through the installation process.
Product Usage Instructions
Follow the below instructions for using the product:
Step 1: Assembly
- Attach iron rack B to iron rack A using screws A as shown in
the instructions. - Attach iron rack C to iron rack B using nuts.
- Attach iron rack C and the fixture to the mounting unit.
- Weave the fixture wire and fixture ground wire through the
stems and swivel. Install stems based on the desired length of the
item on the fixture. - Weave the fixture wire and fixture ground wire through the
ceiling plate, baseplate, ground wire, lanyards, washer, and
decorative nut. Install baseplate, lanyards, ground wire and
swivels into the ceiling plate and secure with washers and
decorative nuts. - Attach the mounting unit to the junction box using the mounting
screws. Secure the mounting unit to the ceiling with wood screws
and wall anchors. - Attach the lanyards to the mounting unit. Make the electrical
connection from the junction box to the fixture. Connect the screw
holes as shown and secure it with ball nuts. Connect the positive,
negative, and ground wires with the supplied wire nuts. Secure with
electrical tape. - Install bulbs (not included).
Note: The parts shown in the instructions may differ slightly
per light fixture.
Step 2: Caution
Before starting the assembly process, ensure that you have all
the required tools and have removed the fuse at the fuse box. Use
safety glasses while assembling the product.
ASSEMBLY INSTRUCTIONS
CAUTION
³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
TOOLS REQUIRED
³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Ladder
Safety glasses
Electrical Phillips
tape
screwdriver
Flat blade screwdriver
Pliers
Wire strippers
HARDWARE INCLUDED
Fixture Iron Rack A Iron Rack B Iron Rack C Screws A Screws B Nuts
Stems
Swivels Ceiling Plate Ball Nuts
Baseplate
Lanyards Washers
Decorative Nuts
Ground Wire
Mounting Unit
Wood Screws
Wall Anchors
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
Mounting Screws
Wire Nuts
EXPLODED PARTS
Wood Screws Decorative Nuts Ground Wire Ball Nuts
Wire Nuts Wall Anchors
Mounting Unit
INSTALLATION
STEP 1
Attach the iron rack B into iron rack A
using screws A a as shown.
Mounting Screws
1
Washers
Lanyards
Baseplate
Ceiling Plate
Swivels
2
Stem
Nuts Iron Rack C
Stem Stem
Stem Screws B
STEP 2
STEP 3
Attach the iron rack C into iron rack B 1 . Unscrew the ball nuts and
using nuts.
green grounding screw from
Attach the iron rack C and fixture into the mounting unit.
iron rack A using screws B.
2. Disassemble the swivels under
ba
the ceiling plate by unscrewing decorative nuts. Keep the baseplate, washers, ground wire
and lanyards for latar use.
Iron Rack A
Iron Rack B
Screws A
a
b
Fixture
Bulbs (not included)
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 4
1 . Weave the fixture wire and fixture ground wire through the stems and swivel.
2. Install swivels and stems into the fixture. Install stems based on the desired length of the item on the fixture.
STEP 5
1 . Weave the fixture wire and fixture ground wire through the ceiling plate, baseplate, ground wire, lanyards, washer and decorative nut.
2. Install baseplate, lanyards, ground wire and swivels into the ceiling plate, and secure with washers and decorative nuts.
STEP 6
Attach the mounting unit to the junction box using the mounting screws. Secure mounting unit to ceiling with wood screws and wall anchors.
STEP 7
STEP 8
1 . Attach the lanyards on to the mounting unit.
Attach the ceiling plate to the mounting unit through
2. Make the electrical connection from the junction box to the fixture. Connect the screw holes as shown, and secure it with ball nuts.
ground wire to the mounting unit using the preinstalled green ground screw.
Then, connect the positive, negative and ground wires with the supplied wire nuts.
Secure with electrical tape.
Black or Red wire (hot) from the junction box
Black wire from the fixture
White wire (neutral) from the junction box
White wire from the fixture
Bare or Green ground wire from the junction box
Ground wire from the Fixture
*Green Ground Screw
*Sealing tape (not included)
STEP 9
Install bulbs (not included)
1
2
