The Pond Guy Ledpro Series High Output Lights Instruction Manual (+ PDF)

Please read these instructions thoroughly before use. Failure to
follow instructions may result in equipment damage or failure,
losses, injury or death.

DANGER:

To avoid possible electric shock:

Do not use if the power cord is damaged.
Do not immerse the Splitter (B) fully in water.

WARNING:

To reduce the risk of electric shock:

Do not modify the power cord.
Do not attempt to repair the lights yourself.

CAUTION:

To reduce the risk of equipment damage or failure:

Do not expose the lights to extreme temperatures.
Do not use with an extension cord.
Do not cover the lights while in use.

IMPORTANT:

The lights are for outdoor use only. Keep out of reach of
children.

Technical Specs:

MODEL	# OF LIGHTS	WATTAGE	ITEM NUMBER
LEDProTM Mini	3	3×1 Watts	120813
LEDPro TM 3-Watt	3	3×3 Watts	120810
LEDPro TM 6-Watt	3	3×6 Watts	120817
LEDPro TM 12-Watt	1	1×12 Watts	120828

Installing Your LEDProTM Lights:

DO NOT TAMPER WITH POWER CORD. Lights may be placed in
or out of water.

Step 1: Plug the two-pin connector on the end
of each Light(C) cord into the Splitter(B) and tighten plastic
retaining nut.

Step 2: Plug the two-pin connector on the end
of the Splitter(B) cord into the Transformer(A) and tighten plastic
retaining nut. PLEASE NOTE: Splitter (B) cannot be fully submerged.
Please ensure the placement is located out of the water.

Step 3: Place Lights(C) in desired
locations.

Step 4: Make sure Photocell (E) is located out
of the water, in an area exposed to natural light.

Step 5: Plug the Transformer(A) into a standard
110 volt outlet with GFCI.

LEDProTM 1, 3 & 6-Watt Light Kits:

(A) 6'
6' |-------3'-------|
(E)
(B)
16' 16'
16'
(C)
(A) 6'
6'
3'
(B) (E)
(D)
16'
(C)

LEDProTM 12-Watt Single Light:

15425 Chets Way | Armada, MI 48005

Maintaining Your LEDProTM Lights:

MAINTENANCE:

WARNING: Before performing any maintenance,
always unplug the LEDProTM Lights from the power source.

CLEAN lenses regularly to remove algae/debris buildup that will
reduce light intensity.

CLEAN with a soft cloth or brush with water, or a descaler if
needed. When using a descaler be sure to rinse components well
before reinstalling.

Troubleshooting:

If you experience any issues with your LEDProTM Lights, please
contact customer support for assistance.

Replacement Parts / Accessories:

DESCRIPTION	ITEM NUMBER
LEDProTM Mini Replacement Bulb	120812
LEDProTM Splitter	190135
LEDProTM Transformer	110525

PRODUCT WARRANTY:

All LEDProTM Lights come with a limited warranty. Please contact
customer support for warranty information.

THANK YOU FOR CHOOSING:

We Know PondsTM

15425 Chets Way Armada, MI 48005

866-POND-HELP (766-3435)

thepondguy.com

View other great products on-line at www.thepondguy.com

View Fullscreen

LEDProTM Series High Output Lights
Product Manual
For Models:
· LEDProTM Mini 1-Watt Light Kit, 3 Pack (Item #120813)
· LEDProTM 3-Watt Light Kit, 3 Pack (Item #120810)
· LEDProTM 6-Watt Light Kit, 3 Pack (Item #120817)
· LEDProTM 12-Watt Single Light
(Item #120828)
Table of Contents:
Important Information. . . . . . . . . . . . . . . . . . . . . . . . 2 Technical Specs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Installing Your LEDProTM Lights . . . . . . . . . . . . . . . . . 3
TM
Maintaining Your LEDProTM Lights. . . . . . . . . . . . . . . 4 Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Warranty Information. . . . . . . . . . . . . . . . . . . . . . . . . 4

IMPORTANT INFORMATION:
Please read these instructions thoroughly before use. Failure to follow instructions may result in equipment damage or failure, losses, injury or death.
DANGER:
To avoid possible electric shock:
· If the power cord, lens, or other components have been damaged, DO NOT operate, LEDProTM Lights should be replaced.
· Close supervision is necessary when the unit is used by or near children.
WARNING:
To reduce the risk of electric shock:
· Connect only to a properly grounded receptacle, which is serviced by a Ground Fault Circuit Interrupter and never remove the ground pin from the plug.
· Provide a “drip loop” for the power cord. This is a loop in the cord below the level of the receptacle or plug that prevents water from traveling along the cord in the direction of the receptacle.
· ALWAYS unplug the LEDProTM Lights from power source when not in use, and before installing, removing or servicing the LEDProTM Light’s components.
· If an extension cord is necessary, a cord with a proper rating should be used. A cord may overheat if the cord is rated for less amperes or watts than the unit rating.
· DO NOT immerse the LEDProTM Light’s plug, Transformer (A) or Splitter (B) in water. If any components get wet, do not attempt to use.
· The LEDProTM Lights are NOT suitable for use in swimming pools, swimming ponds, or other situations where bodily contact is made with the water.
Important LEDProTM Lights may be used in or out of water. When used in open air application, unplug the lights and allow to cool before servicing.
CAUTION:
To reduce the risk of equipment damage or failure:
· DO NOT place LEDProTM Lights near flammable or other dangerous materials or objects.
· DO NOT use the LEDProTM Lights in fluids other than water.
· DO NOT exceed the voltage and wattage indicated on the transformer.
· DO NOT operate during freezing conditions. Remove LEDProTM Lights and store in a protected location.

IMPORTANT:
The Pond Guy® is not responsible for equipment damage or failure, losses, injury or death resulting from failure to follow safety precautions, misuse or abuse of equipment.
TECHNICAL SPECS:

MODEL

# OF LIGHTS WATTAGE

LEDProTM Mini 1-Watt LEDPro TM 3-Watt LEDPro TM 6-Watt LEDPro TM 12-Watt

3×1 Watts

3×3 Watts

3×6 Watts

1×12 Watts

ITEM NUMBER 120813 120810 120817 120828

thepondguy.com | 866-POND-HELP (766-3435)

INSTALLING YOUR LEDPROTM LIGHTS:
DO NOT TAMPER WITH POWER CORD. Lights may be placed in or out of water.
Step 1
Plug the two-pin connector on the end of each Light(C) cord into the Splitter(B) and tighten plastic retaining nut.
Step 2
Plug the two-pin connector on the end of the Splitter(B) cord into the Transformer(A) and tighten plastic retaining nut. PLEASE NOTE: Splitter (B) cannot be fully submerged. Please ensure the placement is located out of the water.
Step 3
Place Lights(C) in desired locations.
Step 4
Make sure Photocell (E) is located out of the water, in an area exposed to natural light.
Step 5
Plug the Transformer(A) into a standard 110 volt outlet with GFCI.

LEDProTM 1, 3 & 6-Watt Light Kits

(A) 6′

6′ |——-3′——-|

(E)

(B)

16′ 16′
16′

(C)

·(A) Transformer

·(B) Splitter

·(C) Light

·(D) Lens (D) ·(E) Photocell

(A) 6′

6′

3′

(B) (E)

(D)

16′

(C)

LEDProTM 12-Watt Single Light

15425 Chets Way | Armada, MI 48005

MAINTAINING YOUR LEDPROTM LIGHTS:

MAINTENANCE: WARNING:

Before performing any maintenance, always unplug the LEDProTM Lights from the power source.
CLEAN lenses regularly to remove algae/debris buildup that will reduce light intensity.
CLEAN with a soft cloth or brush with water, or a descaler if needed. When using a descaler be sure to rinse components well before reinstalling.

TROUBLESHOOTING:
One or more lights fail to illuminate: · Check connection from Light(C) to Splitter(B)
· Inspect Lens(D) for algae/debris accumulation
· Ensure bulb is properly seated in housing
· Replace bulb (3-Watt light set only) All lights fail to illuminate:
· Make sure Transformer(A) is properly seated in electrical outlet
· Make sure electrical outlet provides power
· Check Splitter(B) to Transformer(A) connection
· Check connections from Lights(C) to Splitter(B)
· Ensure bulbs are properly seated in housing and check photocell Lights stay on during the day:
· Make sure photocell is upright, unobstructed & exposed to sunlight

REPLACEMENT PARTS / ACCESSORIES
DESCRIPTION
LEDPro TM 3-Watt Replacement Bulbs (Choose from red, blue, yellow, warm white, cool white. Warm white comes standard) ThePondGuy® Colored Lens Set for LEDProTM Mini 1-Watt (Comes with red, blue, yellow & green lenses ) 20′ Extension Cord (Maximum of 1 extension should be added per light)

ITEM NUMBER 120812
190135
110525

PRODUCT WARRANTY:
LEDProTM Series High Output Lights carry a 3-year warranty. The Pond Guy® will repair or replace any units found to be defective. This limited warranty is extended exclusively to the original purchaser and begins from the date of original purchase receipt. Abuse or misuse of this product or power cord alterations void all warranty. Please call for a Return Authorization Number prior to returning product by calling our Customer Care Department at 866-766-3435. Failure to request an RMA number may result in delay or dismissal of your warranty claim.

THANK YOU FOR CHOOSING:
The Pond Guy® Inc.
We Know PondsTM
15425 Chets Way Armada, MI 48005
866-POND-HELP (766-3435)
thepondguy.com

View other great products on-line at www.thepondguy.com