GS-3652X Fully Managed Access Switches
Product Information: LANCOM GS-3652X
The LANCOM GS-3652X is a high-performance switch designed for
use in large networks. It has a total of 52 ports, including 36 TP
Ethernet ports with speeds of 10M / 100M / 1G and 12 TP Ethernet
ports with speeds of 100M / 1G / 2.5G. It also has 4 SFP+ ports
with speeds of 1G / 10G. The switch features a robust metal housing
with removable mounting brackets for easy installation in a 19-inch
rack. It comes with a serial configuration cable and an IEC power
cord.
LED Description
- System: off (device switched off), green
(device operational), red (hardware error) - Reset button: ~5 sec. pressed (device
restart), pressed until all port LEDs glow (configuration reset and
device restart) - TP Ethernet ports 10M / 100M / 1G: off (port
inactive or disabled), green (link 1000 Mbps), green blinking (data
transfer, link 1000 Mbps), orange (link < 1000 Mbps), orange
blinking (data transfer, link < 1000 Mbps) - TP Ethernet ports 100M / 1G / 2.5G: off (port
inactive or disabled), green (link 2500 – 1000 Mbps), green
blinking (data transfer, link 2500 – 1000 Mbps), orange (link <
1000 Mbps), orange blinking (data transfer, link < 1000
Mbps) - SFP+ ports 1G / 10G: off (port inactive or
disabled), blue (link 10 Gbps), blue blinking (data transfer, link
10 Gbps), green (link 1 Gbps), green blinking (data transfer, link
1 Gbps)
Technical Details
- Number of fans: 1
- Power supply: internal power supply unit
- Housing: robust metal housing, 1 HU with removable mounting
brackets for 19-inch installation, network connectors on the front,
442 x 44 x 300 mm (W x H x D)
Package Content
- Mounting brackets: 2 19-inch brackets for rack mounting
- Cables: 1 IEC power cord, 1 serial configuration cable (1.5
m)
Product Usage Instructions: LANCOM GS-3652X
Before initial startup, please read the enclosed installation
guide for information regarding the intended use of the switch.
Connecting the Configuration Interface
To configure or monitor the switch, connect the configuration
interface via the included serial configuration cable to the serial
interface of the device you want to use.
Connecting Ethernet Interfaces
To connect your PC or a LAN switch to the TP Ethernet
interfaces:
- Use Ethernet cables to connect interfaces 1 to 36 for speeds of
10M / 100M / 1G. - Use Ethernet cables to connect interfaces 37 to 48 for speeds
of 100M / 1G / 2.5G.
Connecting SFP+ Interfaces
To insert suitable LANCOM SFP modules into the SFP+
interfaces:
- Insert the module into interfaces 49 to 52.
- Choose cables that are compatible with the SFP modules and
connect them as described in the module’s documentation.
Supplying Power to the Device
To supply power to the device:
- Connect the IEC power cable supplied or a country-specific
LANCOM Power Cord to the power connector on the device’s back
side. - Before connecting the power supply, connect to earth to avoid
high touch current.
112164 / 0423
LED description & technical details
owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their
Hardware Quick Reference
LANCOM GS-3652X
Configuration interface (Console)
Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring / monitoring the switch.
TP Ethernet interfaces 10M / 100M / 1G
Use Ethernet cables to connect the interfaces 1 to 36 to your PC or a LAN switch.
TP Ethernet interfaces 100M / 1G / 2.5G
Use Ethernet cables to connect the interfaces 37 to 48 to your PC or a LAN switch.
SFP+ interfaces 1G / 10G
Insert suitable LANCOM SFP modules into the SFP+ inter faces 49 to 52. Choose cables which are compatible with the SFP modules and connect them as described in the module’s documentation.
Power connector (device back side) Supply power to the device via the power connector. Please
use the IEC power cable supplied or a countryspecific
LANCOM Power Cord.
ATTENTION: High touch current possible! Connect to earth before connecting the power supply.
Warning! High touch current. Connect to earth before connecting the power supply.
System
System: off System: green System: red
Device switched off Device operational Hardware error
Reset button
~5 sec. pressed Pressed until all port LEDs glow
Device restart Configuration reset and device restart
TP Ethernet ports 10M / 100M / 1G
Off Green Green, blinking Orange Orange, blinking
Port inactive or disabled Link 1000 Mbps Data transfer, link 1000 Mbps Link < 1000 Mbps Data transfer, link < 1000 Mbps
TP Ethernet ports 100M / 1G / 2.5G
Off Green Green, blinking Orange Orange, blinking
Port inactive or disabled Link 2500 – 1000 Mbps Data transfer, link 2500 – 1000 Mbps Link < 1000 Mbps Data transfer, link < 1000 Mbps
SFP+ ports 1G / 10G
Off Blue Blue, blinking Green Green, blinking
Port inactive or disabled Link 10 Gbps Data transfer, link 10 Gbps Link 1 Gbps Data transfer, link 1 Gbps
Hardware Power supply Environment Housing
Number of fans
Internal power supply unit
Temperature range 040° C; humidity 1090%; non-condensing
Robust metal housing, 1 HU with removable mounting brackets for 19″ installation, network connectors on the front, 442 x 44 x 300 mm (W x H x D)
1
Interfaces ETH
SFP+
36 TP Ethernet ports 10 / 100 / 1000 Mbps 12 TP Ethernet ports 10 / 100 / 2500 Mbps
4 SFP+ ports 1 / 10 Gbps 52 concurrent ports in total
Package Content
Mounting brackets Cables
2 19″ brackets for rack mounting; If an additional rear support surface is required for more stable mounting of the switch, please use the LANCOM Switch Rack Mount L250, item no.: 61432, which is available as an accessory.
1 IEC power cord, 1 serial configuration cable 1.5 m
Mounting & connecting
and/or omissions.
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
i
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
Cloud-ready
The power plug of the device must be freely accessible.
Please note that support for third-party accessories (SFP and DAC) is not provided.
Please observe the following when setting up the device For devices to be operated on the desktop, please attach the adhesive rubber footpads Do not rest any objects on top of the device Keep all ventilation slots on the side of the device clear of obstruction Mount the device into a 19″ unit in a server cabinet using the provided screws and mounting brackets. If an
additional rear support surface is required for more stable mounting of the switch, please use the LANCOM Switch Rack Mount L250, which is available as an accessory.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Business network solutions "made in Germany": LANCOM Systems GmbH
