GS-3628X Hardware Fully Managed Access Switches
Product Information
The LANCOM GS-3628X is a network switch with 28 concurrent ports
in total, including 12 TP Ethernet ports (10/100/1000 Mbps), 12 TP
Ethernet ports (10/100/2500 Mbps), and 4 SFP+ ports (1/10 Gbps). It
has a robust metal housing measuring 442 x 44 x 375 mm (W x H x D)
and comes with removable mounting brackets for rackmounting. The
switch also features a reset button and LED indicators for system
status and port activity.
Technical Details
- Interfaces: ETH, SFP+
- Number of fans: 1
- Internal power supply unit
Package Content
- Mounting brackets (2)
- Cables: 1 IEC power cord, 1 serial configuration cable (1.5
m)
Important Notes
- The LANCOM GS-3628X is cloud-ready.
- The power plug of the device must be freely accessible.
- Support for third-party accessories (SFP and DAC) is not
provided.
Product Usage Instructions
To configure or monitor the switch, connect the configuration
interface via the included serial configuration cable to the serial
interface of the device.
To connect devices to the switch:
- For TP Ethernet interfaces 10M/100M/1G (interfaces 1 to 12),
use Ethernet cables to connect the interfaces to your PC or a LAN
switch. - For TP Ethernet interfaces 100M/1G/2.5G (interfaces 13 to 24),
use Ethernet cables to connect the interfaces to your PC or a LAN
switch. - For SFP+ interfaces 1G/10G (interfaces 25 to 28), insert
suitable LANCOM SFP modules into the SFP+ interfaces and choose
cables that are compatible with the SFP modules. Connect them as
described in the module’s documentation.
To supply power to the device, use the IEC power cable supplied
or a country-specific LANCOM Power Cord. Before connecting the
power supply, make sure to connect the device to earth to avoid
high touch current.
The reset button can be used to restart the device or reset the
configuration. To restart the device, press and hold the reset
button for approximately 5 seconds. To reset the configuration and
restart the device, press and hold the reset button until all port
LEDs glow.
The LED indicators provide information about system status and
port activity:
- System: off – device switched off
- System: green – device operational
- System: red – hardware error
- TP Ethernet ports 10M / 100M / 1G:
- Off – port inactive or disabled
- Green – link 1000 Mbps data transfer, link 1000 Mbps
- Green, blinking – link 1000 Mbps data transfer, link < 1000
Mbps - Orange – link < 1000 Mbps data transfer, link < 1000
Mbps - Orange, blinking – port inactive or disabled
- TP Ethernet ports 100M / 1G / 2.5G:
- Off – port inactive or disabled
- Green – link 2500-1000 Mbps data transfer, link 2500-1000
Mbps - Green, blinking – link 2500-1000 Mbps data transfer, link <
1000 Mbps - Orange – link < 1000 Mbps data transfer, link < 1000
Mbps - Orange, blinking – port inactive or disabled
- SFP+ ports 1G / 10G:
- Off – port inactive
- Blue – link 10 Gbps
- Green – link 1000 Mbps
112167 / 0423
LED description & technical details
owners. This document contains statements relating to future products and their attributes. LANCOM Systems reserves the right to change these without notice. No liability for technical errors
LANCOM, LANCOM Systems, LCOS, LANcommunity and Hyper Integration are registered trademarks. All other names or descriptions used may be trademarks or registered trademarks of their
Hardware Quick Reference
LANCOM GS-3628X
Configuration interface (Console)
Connect the configuration interface via the included serial configuration cable to the serial interface of the device you want to use for configuring / monitoring the switch.
TP Ethernet interfaces 10M / 100M / 1G
Use Ethernet cables to connect the interfaces 1 to 12 to your PC or a LAN switch.
TP Ethernet interfaces 100M / 1G / 2.5G
Use Ethernet cables to connect the interfaces 13 to 24 to your PC or a LAN switch.
SFP+ interfaces 1G / 10G Insert suitable LANCOM SFP modules into the SFP+
interfaces 25 to 28. Choose cables which are compatible
with the SFP modules and connect them as described in the
module’s documentation.
Power connector (device back side) Supply power to the device via the power connector. Please
use the IEC power cable supplied or a country-specific
LANCOM Power Cord.
ATTENTION: High touch current possible! Connect to earth before connecting the power supply.
Warning! High touch current. Connect to earth before connecting the power supply.
System
System: off System: green System: red
Device switched off Device operational Hardware error
Reset button
~5 sec. pressed Pressed until all port LEDs glow
Device restart Configuration reset and device restart
TP Ethernet ports 10M / 100M / 1G
Off Green Green, blinking Orange Orange, blinking
Port inactive or disabled Link 1000 Mbps Data transfer, link 1000 Mbps Link < 1000 Mbps Data transfer, link < 1000 Mbps
TP Ethernet ports 100M / 1G / 2.5G
Off Green Green, blinking Orange Orange, blinking
Port inactive or disabled Link 2500 – 1000 Mbps Data transfer, link 2500 – 1000 Mbps Link < 1000 Mbps Data transfer, link < 1000 Mbps
SFP+ ports 1G / 10G
Off Blue Green
Port inactive Link 10 Gbps Link 1000 Mbps
Hardware Power supply Environment
Housing
Number of fans
Internal power supply unit
Temperature range 040°C; short-term temperature range 050°C; humidity 1090%, noncondensing
Robust metal housing, 19″, 1 HU (442 x 44 x 375 mm > W x H x D) with removable mounting brackets, network connectors on the front
1
Interfaces ETH
SFP+
12 TP Ethernet ports 10 / 100 / 1000 Mbps 12 TP Ethernet ports 10 / 100 / 2500 Mbps
4 SFP+ ports 1 / 10 Gbps 28 concurrent ports in total
Package Content
Mounting brackets 2 19″ brackets for rackmounting
Cables
1 IEC power cord, 1 serial configuration cable 1.5 m
Mounting & connecting
and/or omissions.
Before initial startup, please make sure to take notice of the information regarding the intended use in the enclosed installation guide!
i
Operate the device only with a professionally installed power supply at a nearby power socket that is freely accessible at all times.
Cloud-ready
The power plug of the device must be freely accessible.
Please note that support for third-party accessories (SFP and DAC) is not provided.
Please observe the following when setting up the device For devices to be operated on the desktop, please attach the adhesive rubber footpads Do not rest any objects on top of the device Keep all ventilation slots on the side of the device clear of obstruction Mount the device into a 19″ unit in a server cabinet using the provided screws and mounting brackets.
Hereby, LANCOM Systems GmbH | Adenauerstrasse 20/B2 | D-52146 Wuerselen, declares that this device is in compliance with Directives 2014/30/EU, 2014/35/EU, 2011/65/EU, and Regulation (EC) No. 1907/2006. The full text of the EU Declaration of Conformity is available at the following Internet address: www.lancom-systems.com/doc
Business network solutions "made in Germany": LANCOM Systems GmbH
