JYL6134A 15 Inch 3 Light Metal LED Pendant
Product Information
The JYL6134A is a lighting fixture that comes with a plastic
gecko, lamp body, wire connector, mounting bracket, canopy nut,
shade, ring and bulb. The product dimensions are L33.5XW6X 10.5H.
It is recommended that the installation of this lighting fixture be
done by a licensed electrician to ensure safety. The external
flexible cable or cord of this lamp cannot be replaced if it is
damaged.
Care and Maintenance
Please make sure that you have all parts indicated before you
begin assembly of this item. This item should be assembled on a
soft surface to prevent scratching the finish during assembly. To
reduce the risk of fire, electrical shock or injury to persons or
property, please follow the guideline below for safe use and
installation. If the cord is damaged, the lamp shall be
destroyed.
Part List and Hardware List
| Piece Description | Picture | Quantity | Piece Description | Picture | Quantity |
|---|---|---|---|---|---|
| A Plastic Gecko |  | 2X | F Lamp body |  | 1X |
| B Wire connector |  | 3X | G Canopy nut |  | 2X |
| C Mounting bracket |  | 1X | H Shade |  | 3X |
| D Mounting screw |  | 2X | I Ring |  | 3X |
| E Screw |  | 2X | J Bulb |  | 3X |
Product Usage Instructions
Before beginning assembly of the product, make sure all parts
are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. The estimated assembly time is 20
minutes.
- Fix the mounting bracket (C) to the outlet box with mounting
screw (D). - Insert the plastic gecko (A) into the hole of the ceiling and
fix the mounting bracket (C) to the ceiling with screw (E). - Make wire connections, with wire connectors (B), following the
reference chart listed below:
| Outlet Supply Wire | Wire Color | Wire Connector |
|---|---|---|
| Hot | Black or Red | Parallel Cord (round & smooth) |
| Neutral | White | Parallel Cord (square & ridged) |
| Grounding Instructions | ||
| For installation in the United States: | ||
| Wrap ground wire from outlet box around mounting screw on mounting bracket, no less than 2 from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. | ||
| For installation in Canada: | ||
| If fixture is supplied with ground wire, wrap ground wire around mounting screw on mounting bracket. Tighten ground screw. |
- Attach the Canopy of lamp body (F) to the Mounting bracket (C)
and fix it with the Canopy Nut (G). - Put the Shade (H) onto the socket and fix it by socket ring
(I). - Install bulbs (J). Be sure to use light bulbs (J) with wattage
no greater than specified on this fixture. Always make sure that
electrical current is turned off before changing bulbs.
WARNING
WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE
To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A Plastic Gecko
2X
F
Lamp body
1X
B wire connector
3X
G
Canopy nut
2X
C
mounting bracket
1X
H
Shade
3X
D mounting screw
2X
I
Ring
3X
E
screw
2X
J
Bulb
3X
Model#: JYL6134A Product Dimensions: L33.5″XW6″X 10.5″H
1/2
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
1. Fix the mounting bracket(C) to the outlet box with mounting screw(D).
2. Insert the plastic gecko(A)into the hole of ceiling, and fix the mounting bracket(C)to the ceiling with screw(E).
3. Make wire connections, with wire connectors(B), following the reference chart listed below.
Connect, Hot, Black or Red Outlet Supply Wire to:
Black * Parallel Cord (round & smooth)
Connect, Neutral, White Outlet Supply Wire to:
White * Parallel Cord (square & ridged)
Clear, Brown, Gold or Black without Tracer (colored stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around mounting screw on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around mounting screw on mounting bracket. Tighten ground screw.
4. Attach the Canopy of lamp body(F) to the Mounting bracket(C)and fix it with the Canopy Nut(G) 5. Put the Shade(H)onto the socket and fix it by socket ring(I) 6. Install bulbs(J). Be sure to use light bulbs(J) with wattage no greater than specified on this
fixture. Always make sure that electrical current is turned off before changing bulbs.
PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT, THERE ARE 3PCS LED 9-WATT BULB IN THE BOX
ENJOY YOUR LAMP
2/2
A B C
F
H I J
