Dragino Lht65s-ne117 Lorawan Temperature And Humidity Sensor Owner's Manual

Product Information:

• Product Name: LoRaWAN Temperature & Humidity Sensor
• Model: LHT65S-NE117
• Overview: The Dragino LHT65S-NE117 Temperature & Humidity
  sensor is a Long Range LoRaWAN Sensor. It includes a built-in
  Temperature & Humidity sensor and has an external sensor
  connector to connect to an external Temperature Sensor. The sensor
  allows users to send data and reach extremely long ranges. It
  provides ultra-long range spread spectrum communication and high
  interference immunity while minimizing current consumption. The
  sensor is designed for professional wireless sensor network
  applications such as irrigation systems, smart metering, smart
  cities, building automation, etc.
• Battery: Built-in 2400mAh non-chargeable battery (lasts for
  more than 10 years*)
• Compatibility: LoRaWAN v1.0.3 Class A protocol (works with
  standard LoRaWAN gateway)
• Features:
  • Datalog feature
  • Tri-color LED to indicate status
  • AT Commands to change parameters
  • Firmware upgradable via program port
  • Built-in Temperature & Humidity sensor
  • External probe uses TI TMP117A NIST traceability temperature
    sensor
  • Remote configure parameters via LoRaWAN Downlink
• Bands: CN470/EU433/KR920/US915/EU868/AS923/AU915
• Sensor Spec:
  • Built-in Temperature Sensor
  • Built-in Humidity Sensor
  • External Temperature Sensor
• Order Info: LHT65S-NE117-XX (XX: Frequency Bands, options:
  EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915)
• Manufacturer: Dragino Technology Co., Limited
• Address: Room 202, Block B, BCT Incubation Bases (BaoChengTai),
  No.8 CaiYunRoad LongCheng Street, LongGang District; Shenzhen
  518116, China
• Contact Information: Direct: +86 755 86610829 | Fax: +86 755
  86647123 | Email: [email protected]
• Website: www.dragino.com

Product Usage Instructions:

1. Ensure the built-in battery is charged or replace it with a new
   one if necessary.
2. Choose the appropriate frequency band
   (EU433,CN470,EU868,IN865,KR920,AS923,AU915,US915) based on your
   location and requirements.
3. If using an external temperature sensor, connect it to the
   external sensor connector.
4. Place the sensor in the desired location where temperature and
   humidity measurements are required.
5. If required, configure the sensor parameters remotely via
   LoRaWAN Downlink using AT commands.
6. To check the status of the sensor, refer to the tri-color LED
   indicators.
7. If there is no network coverage, the sensor will record the
   data using the Datalog feature. You can retrieve the sensor values
   later to ensure no missed readings.
8. If firmware upgrade is required, connect the sensor to a
   program port and follow the instructions to upgrade the
   firmware.
9. Monitor the temperature and humidity readings either through a
   standard LoRaWAN gateway or by retrieving the recorded data.