P2-41 Flush Pull
Product Information
The P2 Flush Pull is a product made of ABS plastic with a black
finish. It is available in two sizes: small and large. The maximum
static load for lifting/pulling is 1300 N (300 lbf) for the small
size and 450 N (100 lbf) for the large size. The door thickness
range for installation is between 1.0 mm (.040 inch) to 2.5 mm
(.100 inch). The flammability rating is UL94-HB or UL94-V0.
Product Usage Instructions
- Measure the door thickness to ensure it falls within the
specified range of 1.0 mm (.040 inch) to 2.5 mm (.100 inch). - Select the appropriate part number based on the desired size,
flammability rating, and lock style. Refer to the provided table
for part number options. - If a lock core is desired, choose a part number that includes a
lock core and specify the keying option (KA or KD). If a lock core
is not needed, choose a part number without a lock core. - If a lock core is selected, refer to the provided table for the
corresponding key code and bag quantity. - Install the P2 Flush Pull on the door by following the
installation instructions provided in the complete user manual
available at www.southco.com/P2.
Note: For pulls without a lock core, the lock core needs to be
purchased separately. The cam for the lock is also sold separately.
Refer to page 167 of the handbook or visit www.southco.com for more
information.
P2 Flush Pull
510
Low profile · Lift or pull · Single hole mount
· Snap-in installation · 2 sizes
Material and Finish ABS plastic, black
Performance Details Maximum static load: Lifting / pulling: 1300 N (300 lbf)
Small
Pushing / sliding: 450 N (100 lbf)
Large
82.5 (3.25) Small P2
5.5 (.21)
R 1.5 (.06)
35.8 (1.41) 25.5 (1.00)
17 (.65)
40 (1.58)
ACTUAL SIZE
Door thickness (see table)
127.3 (5.01) Large P2
1.8 (.07)
Flammability rating: UL94-HB or UL94-V0
Operating temperature range: -50°C (-60°F) to 60°C (140°F)
Notes Performance details are based on installation in a 1.2 (.048) thick steel door. Maximum loads are limited by door strength.
R 1 (.040) Textured matte finish
ACTUAL SIZE
132±0.3 (5.20±.01) Larger P2
87.5±0.3 (3.45±.01) Smaller P2
30.7±0.15 (1.210±.005)
R Max. 1.5 (.06)
Part Number Selection _________________________________________________________________________________
Other options available. For complete details on variety, part numbers, installation and
specification, go to
www.southco.com/P2
Downloaded from Arrow.com.
Door Thickness Range
Min. 1.0 (.040) 1.4 (.055) 1.8 (.070) 2.1 (.085)
Max. 1.4 (.055) 1.8 (.070) 2.1 (.085) 2.5 (.100)
Part Number
Small
Large
UL94-HB
UL94-V0
UL94-HB
UL94-V0
P2-41
P2-41-1
P2-51
P2-51-1
P2-42
P2-42-1
P2-52
P2-52-1
P2-43
P2-43-1
P2-53
P2-53-1
P2-44
P2-44-1
P2-54
P2-54-1
Dimensions in millimeters (inch) unless otherwise stated
P2 Flush Pull – Lockable 511
Low profile · Lift or pull · Single hole mount
Type B (Counter-Clockwise) Version Shown
116.2 (4.57) 82.3 (3.24)
Cam shown in locked position *
Cam Grip Frame
Cam forward No Offset
(Straight) Cam Cam reversed
Cam Length
* Cam Ordered Separately
For Cam Part Numbers and options see our Handbook page 167
or www.southco.com
31.85 (1.25) Door
8.3 (0.33)
25.3 (1) 35.5 (1.4)
38.8 (1.53)
Door Thickness (see table)
2 (0.08) Typical Wall Thickness
23 (0.91)
Cam Forward Grip
25 (0.98) 21.8 (0.86) 18.6 (0.73) 15.5 (0.61)
Cam Reversed Grip
25 (0.98) 28.2 (1.11) 31.4 (1.24) 34.5 (1.36)
Cam Offset
No Offset 3.2 (1.25) 6.4 (.250) 9.5 (.375)
· Snap-in installation · Lockable · Lock core included or
sold separately · Cam sold separately
Material and Finish Pull: ABS plastic, black
Lock parts: Zinc alloy, powder coated. Brass. Steel, zinc plated. Buna-N
Flammability Rating UL94-HB or UL94-VO (See table)
Notes For pulls without lock core, lock core sold separately, see page 158.
Cam sold separately. See page 167.
Frame
110 +/- 0.3 (4.33 +/-0.012) 11 +/- 0.3 (0.433 +/-0.012)
4x R 1.5
30.7 +/- 0.3
(.06)
(1.21 +/- 0.012)
Door
___________________________________________________________________________ Part Number Selection
D Door Thickness Range
1 1.0 (.040) – 1.4 (.055) 2 1.4 (.055) – 1.8 (.070) 3 1.8 (.070) – 2.1 (.085) 4 2.1 (.085) – 2.5 (.100)
P2 – 4 D M – R L
M Material
1 UL94-V0 PC/ABS 2 UL94-HB ABS
R Rotation
1 Type A (Clockwise to lock) 2 Type B (Counter-Clockwise to lock)
L Lock Style
2 With lock core, keyed alike CH751 (with two flat keys supplied)
9 Without lock core (See our handbook page 183 or visit www.southco.com)
Dimensions in millimeters (inch) unless otherwise stated
Other options available. For complete details on variety, part numbers, installation and
specification, go to
www.southco.com/P2
Downloaded from Arrow.com.
PK Lock Cores 159
SOUTHCO® Key-Choice System
Lock Cores – Disc Tumbler
Keying KA KA KD KD KD
MKKD MKKD MKKD
Key code CH751 RS001 10 CODES 50 CODES 125 CODES 10 CODES 50 CODES 125 CODES
Bag qty 1 1 10 50 125 10 50 125
Shuttered stainless steel scalp PK-39-72-13-KCH751 PK-39-72-13-RS001 PK-39-72-13-KD1010 PK-39-72-13-KD1050 PK-39-72-13-KD1125 PK-39-72-13-MK1010 PK-39-72-13-MK1050 PK-39-72-13-MK1125
Lock Core Part Number Non shuttered stainless steel scalp
PK-132-13 PK-132-13-RS001 PK-132-13-KD1010 PK-132-13-KD1050 PK-132-13-KD1125 PK-132-13-MK1010 PK-132-13-MK1050 PK-132-13-MK1125
Non shuttered black powder coated PK-115-13
PK-29-15-13-RS001 PK-29-15-13-KD1010 PK-29-15-13-KD1050 PK-29-15-13-KD1125 PK-29-15-13-MK1010 PK-29-15-13-MK1050 PK-29-15-13-MK1125
Non shuttered chrome plated PK-116-13
PK-29-16-13-RS001 PK-29-16-13-KD1010 PK-29-16-13-KD1050 PK-29-16-13-KD1125 PK-29-16-13-MK1010 PK-29-16-13-MK1050 PK-29-16-13-MK1125
Keys Master Key (1) Control (Removal) Key (1)
Part Number PK-24-01 PK-11-03
Lock Cores – Tool Operable
Head Style
Phillips recess
Keys CH751 RS001
Lock Core Part Number
Slotted
4 mm Hex recess
Part Number PK-10-01
PK-10-01-RS001
8 mm Hex recess
Chrome plated Black powder coated
PK-0-34027-01 PK-0-34027-50
PK-0-43489-01 PK-0-43489-50
PK-0-34323-01 PK-0-34323-50
PK-0-40374-01 PK-0-40374-50
Key code selection
KA- Keyed Alike: All lock cores are the same key code
KD- Keyed Differently: Multiple key codes provided in a nonmaster key system
MKKD – Master Keyed, Keyed Differently: Multiple key codes provided in a master key system
Notes
Part Number includes 1 lock core and 2 keys
Lock Core Installation for CM-3 and CM-6 only (see page 164)
Ramped area of housing
01 (Clockwise)
Lock Core Installed (01 Rotation)
Unlocked Position
Locked Position
Flats of lock Southco logo on
extender
this side of housing
09 (Counter-Clockwise)
Lock Core Installed (09 Rotation)
Unlocked Position
Locked Position
Southco logo on this side of housing
Downloaded from Arrow.com.
Dimensions in millimeters (inch) unless otherwise stated
Installation Notes
1. Prepare panel and install latches shown on page 164.
2. Latch should be in unlatched position. The flats of the lock extender should be aligned with the flats on the housing.
3. Take a lock core and orient the brass wafers to the internal ramped area of the housing. Push lock core into housing until it stops.
4. Insert key into lock core and turn to verify lock core is fully seated and operating properly.
5. Install cam.
Other options available. For complete details on variety, part numbers, installation and
specification, go to
www.southco.com/PK
CM Cam Locks 167
Cams & installation
Mounting nut
Housing Door
Screw & lock washer
Sealing washer (if included)
16.25 / 16.35 Frame (.640 / .644) Door
Stop washer Cam
Ø 19±0.2 (.75±.007)
Max. door thickness
(see table page 187)
Installation Notes
1. Place sealing washer onto housing (if included) and put through the mounting hole (see panel preparation).
2. Install mounting nut and tighten to 5 Nm (44 inlbf).
3. Install cam to assembly Properly orientate for rotation and grip.
4. Install screw. Tighten to 4 Nm (35 inlbf).
ACTUAL SIZE #10
Material and Finish
Cam: Steel plated
C Offset
C Offset
C Offset
2 (.079)
16 (.62)
L Length
L Length
L Length
S C – No hook
S H – Hook type 1
S L – Hook type 2
___________________________________________________________________________ Part Number Selection
S Style C No hook H Hook type 1 L Hook type 2
C Cam Offset 0 No offset 2 3.2 (.125) 4 6.4 (.250) 6 9.5 (.375)
See table Order lock and cam separately Cam part number (no lock) For Lock selection see pages 164-166
CM – S C L
Downloaded from Arrow.com.
L Length 06 19 (.75) 10 31.8 (1.25) 14 44.5 (1.75)
Dimensions in millimeters (inch) unless otherwise stated
Other options available. For complete details on variety, part numbers, installation and
specification, go to
www.southco.com/CM
Latches and Access Hardware Solutions | Southco
