Travis Industries 94800821 Tempest Deck Mount Instruction Manual

Product Information

• Product Name: TempestTM Deck Mount
• SKU: 94800821

Overview

This deck mount is designed for use with the following
permanent-mount Tempest models:

• Tempest Torch 24v (LP – 94900755 & NG – 94900745)
• Tempest Torch Manual Start (LP – 94900753 & NG –
  9490043)
• Tempest Lantern 24v (LP – 94900757 & NG – 94900747)
• Tempest Lantern Manual Start (LP – 94900756 &
  94900746)

Packing List

• Deck Mount (with (8) set-screws pre-installed)
• (4) 3/8 x 4 Lag Screws
• (4) 3/8-16 x 4 Bolts
• (4) 3/8-16 Lock-Nuts
• (4) 3/8 Washers
• (1) 1/8 Hex Wrench

Deck Mount Attachment

NOTE: The illustration below is for example
only. Make sure to follow all gas line and building code
requirements for your location. The base may be shimmed to level
the mount.

Page 1 of 1

17601536 – 2/16/21

Product Usage Instructions

1. Ensure you have the correct Tempest model mentioned in the
   overview.
2. Check that all the components mentioned in the packing list are
   included.
3. Find a suitable location on your deck to install the Tempest
   deck mount.
4. Ensure that you comply with all gas line and building code
   requirements for your location.
5. If needed, shim the base of the deck mount to level it.
6. Using the provided 3/8 x 4 Lag Screws, attach the deck mount
   securely to your deck.
7. Use the 1/8 Hex Wrench to tighten the set-screws pre-installed
   on the deck mount.
8. Place your desired Tempest model onto the deck mount and ensure
   it is securely attached.
9. Follow the specific lighting and operation instructions for
   your Tempest model as mentioned in its respective user manual.