D280M-8CH-OSB Eden 8 Light Chandelier
Product Information
The product is a lamp designed for environmental lighting. The
package includes the fixture and mounting package, along with
necessary wires and connectors for installation. The lamp requires
electrical connection and must be installed in accordance with
local and National Electrical Code standards. The manual provides
detailed instructions and illustrations for assembly and
installation.
Product Usage Instructions
- Turn off the main power at the circuit breaker before
installing the fixture to prevent electric shock. - Remove the fixture and mounting package from the box and ensure
that all parts are present by referencing the illustrations on the
installation instructions. - Follow the assembly steps provided in the manual, using the
illustrated guide to properly connect the wires and secure the
lamp. - All electrical connections must be in accordance with local and
National Electrical Code (N.E.C.) standards. If you are not
familiar with proper electrical wiring connections, obtain the
services of a qualified electrician. - After assembly, turn on the main power and test the lamp to
ensure it is functioning properly.
ASSEMBLY & INSTALLATION INSTRUCTIONS INSTRUCCIONES DE INSTALACION PARA LAMPARA DE MEDIO AMBIENTE
ASSEMBLAGE ET INSTALLATION INSTRUCTIONS
*************************************************************************************************************************************************************** Please read carefully and save these instructions, as you may need them at a later date.
CAUTION
Turn off the main power at the circuit breaker before installing the fixture, in order to prevent possible shock.
GENERAL
All electrical connections must be in accordance with local and National Electrical Code (N.E.C. ) standards. If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician.
Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions. ***************************************************************************************************************************************************************
ASSEMBLY STEPS: PASOS PARA ENSAMBLAR:
TAPES D’ASSEMBLAGE
1. F
D
2. E
F
3. G.D
A
4. L
M
5. K
L
6. J
K
7. C
B
8. I. H
F
9. N.O
P
10. BULB
Q
A B C D G H I
J
K
WHITE SUPPLY WIRE
BLACK SUPPLY WIRE
WHITE OR IDENTIFIED FIXTURE WIRE UL LISTED WIRE NUTS
PLAIN OR BLACK FIXTURE WIRE
BARE, OR GREEN
GROUND WIRE FROM SUPPLY
BARE, OR GREEN
FIXTURE GROUND WIRE
OR BARE, OR GREEN
GROUND WIRE FROM SUPPLY
GREEN GROUND SCREW
F E
L
M O N
P Q
D280M-8CH-OSB
PAGE 1 of 2
*************************************************************************************************************************************************************** Por favor, lea cuidadosamente y conserve estas instrucciones, ya que puede necesitarlas en el futuro.
PRECAUCI N
Suspenda la corriente el ctrica desde el disyuntor de circuitos antes de instalar el luminario, con el fin de evitar una descarga el ctrica.
GENERAL
Todas las conexiones el ctricas deben cumplir con las normas locales y el C digo El ctrico Nacional de E.U.A (N.E.C. ). Si usted noest familiarizado con las conexiones el ctricas adecuadas, busque los servicios de un electricista calificado.
Saque el luminario y el paquete de montaje de la caja y aseg rese de que no falten partes al referirse a las ilustraciones en las instrucciones de instalaci n.
***************************************************************************************************************************************************************
ALAMBRE DEL SUMINSTRO BLANCO
ALAMBRE DEL SUMINSTRO NEGRO
ALAMBRE BLANCO
O IDENTIFICADO DE LA LAMPARA
CONECTADOR UL CALIFICADO
ALAMBRE NEGRO
O NEUTRO DE LA LAMPARA
ALAMBRE DE TIERRA
VERDE O NEUTRO DEL SUMINISTRO
ALAMBRE DE TIERRA
VERDE O NEUTRO DE LA LAMPARA
O ALAMBRE DE TIERRA
VERDE O NEUTRO DEL SUMINISTRO
TORNILLO DE TIERRA VERDE
***************************************************************************************************************************************************************
Lire attentivement ce mode d’emploi et le conserver pour r f rence ult rieure.
ATTENTION
Couper le courant au niveau du disjoncteur avant d’installer le luminaire afin d’ viter tout risque de choc lectrique.
INFORMATIONS GENERALES
Toutes les connexions lectriques doivent tre conformes aux r glementations nationale et locale en mati re d’installations lectriques. En cas de doute sur le branchement des c bles lectriques, s’adresser un lectricien agr .
Sortir le luminaire et les accessoires de montage de l’emballage et s’assurer qu’aucune pi ce ne manque en les comparant aux illustrations figurant dans ce mode d’emploi.
***************************************************************************************************************************************************************
D280M-8CH-OSB
PAGE 2 of 2
FILS DE COURANT BLANC
FILS DE COURANT NOIR
FILS VERT OU NEUTRE DU COURANT
FILS DE CONNECTEUR BLANC OU IDENTIFIABLE
COINCEUR DE RELAIS UL QUALIFIE
FILS DE CONNECTEUR NOIR OU
SANS MARQUES
FILS VERT OU NEUTRE
OU
FILS VERT
VIS DE
OU NEUTRE
TERRE VERTE
DU COURANT


















