WLP-100 Wireless Power Transfer
Product Information: Wireless Power Transfer WLP-100
The WLP-100 is a device that uses advanced inductive coupling
technology to transfer power wirelessly across the door gap to
power electrified locks. It eliminates the need to core drill the
door and worry about broken wires. The device can transfer lock
status monitoring and field selectable 12/24 VDC output. It can be
used with fail-secure electrified locks/latches and provides up to
30 seconds of sustained power for intermittent duty. The device has
a flexible mounting position and an infrared signal light. It is
suitable for both wood and metal doors, and it comes with extension
mounting tabs included for metal door installation.
Standard Features:
- No need to core drill the door, no worries about broken
wires - Door status output
- Transfers lock status monitoring
- Field selectable 12/24 VDC output
- Use with fail-secure electrified locks/latches (Provides up to
30 seconds of sustained power for intermittent duty) - Flexible mounting position
- Infrared signal light
- For wood and metal doors (extension mounting tabs included for
metal door installation)
Specifications:
- Input Power (Frame Side): 1A/27.6VDC
- Output Power (Door Side): 12VDC@800mAd24VDC@400mA (Field
selectable) - Current Draw: 1A/27.6VDC *Requires 1.5 A power when
energized - Maximum Door Gap: 3/16(4~5mm)
- Maximum Tolerance with 3/16 (4~5mm) Door Gap – Horizontal :
1/16 (1mm), 1 mm for IR sensing – Vertical : 1/16 (1mm), 1 mm for
IR sensing
Installation Diagram:
Warranty:
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1 year
from the date of sale to the original client. The GEM policy is one
of continual development and improvement; therefore GEM reserves
the right to change specifications without notice.
Product Usage Instructions:
The WLP-100 adopts inductive coupling through advanced infrared
technology to transfer power wirelessly across the door gap to
power electrified locks. Follow the below instructions to install
and use the WLP-100:
- Identify the door and frame sides of the WLP-100.
- Mount the transmitter on the frame side and the receiver on the
door side. Make sure that the infrared signal light is visible on
both sides. - Connect the input power (frame side) to the PSM-29T power
supply module and connect the output power (door side) to the
electrified lock/latch. - Select the appropriate output power (12VDC@800mAd24VDC@400mA)
based on your lock/latch requirements. - Adjust the device to fit the door gap. The maximum door gap is
3/16(4~5mm). - Test the device by locking and unlocking the electrified
lock/latch. The device transfers lock status monitoring.
Note: The WLP-100 can be used with fail-secure electrified
locks/latches and provides up to 30 seconds of sustained power for
intermittent duty.
Wireless Power Transfer
WLP-100
Advanced Inductive Coupling Technology
The WLP-100 adopts inductive coupling through an advanced infrared technology to transfer power wirelessly across the door gap to power electrified locks. Installation is made simple and less time consuming.
Standard Features
No need to core drill the door, no worries about broken wires
Door status output
Transfers lock status monitoring
Field selectable 12/24 VDC output
Use with fail-secure electrified locks/latches (Provides up to 30 seconds of sustained power for intermittent duty)
Flexible mounting position
Infrared signal light
For wood and metal doors (extension mounting tabs included for metal door
installation)
Specifications
Input Power (Frame Side) 1A/27.6VDC
Output Power (Door Side) 12VDC@800mAd24VDC@400mA (Field selectable)
Current Draw 1A/27.6VDC *Requires 1.5 A power when energized
Maximum Door Gap 3/16″(4~5mm)
Maximum Tolerance with 3/16″ (4~5mm) Door Gap – Horizontal : 1/16″ (1mm), 1 mm for IR sensing – Vertical : 1/16″ (1mm), 1 mm for IR sensing
GIANNI INDUSTRIES, INC.
Tel: +886-2-2267-7986 Fax: +886-2-2267-9876 www.gianni.com.tw [email protected]
Dimensions (215″mm)
(25m1m” )
Unit: mm
4 1/2″ (115mm) 5 1/2″ (140mm) 6 1/8″ (156mm)
6 1/8″ (156mm) 5 1/2″ (140mm) 4 1/2″ (115mm)
(331.55m/1m6″)
Installation Diagram
WLP-100 Receiver
AC DC BATAL
PSM-29T
WLP-100 Transmitter
(1335./51m6″m)
Warranty The product is warranted against defects in material and workmanship while used in normal service for a period of 1 year from the date of sale to the original client. The GEM policy is one of continual development and improvement; therefore GEM reserves the right to change specifications without notice.
GIANNI INDUSTRIES, INC.
Tel: +886-2-2267-7986 Fax: +886-2-2267-9876 www.gianni.com.tw [email protected]
