Skullcandy S2tew Sesh Active Noise Cancelling True Wireless Earbuds User Guide

S2TEW Sesh Active Noise Cancelling True Wireless Earbuds
User Guide
PERFECTLY SIMPLE.
NOISE-CANCELING
https://qrstud.io/jokcy25

S2TEW Sesh Active Noise Cancelling True Wireless Earbuds

4 Mic Digital Active Noise Canceling
Clear Voice Smart Mic
Hours Total Battery
Sweat / Water Resistant

Let’s get started

1. Take the earbuds out of the charging case and remove the protective stickers from the charging points.
2. Place the earbuds in the charging case. The LEDs turn red. Remove the earbuds from the case.
3. Open Bluetooth settings on your device. Select Sesh ANC from the list of available devices.
4. Accept any PAIR or OK prompts. Your earbuds will connect to your device. They are now ready to use.

Download the App
Toggle controls, access user guides, and register your product through the Skullcandy App.

https://qrstud.io/jtfq2ky

Button controls

Power On / Off
Remove the earbuds from the case to power ON and connect. Place the earbuds in the case to power the earbuds OFF and charge. To manually power ON your earbuds, press and hold the button for one second. To power OFF, press 2 times and then press and hold for 1 second.

Press 1 Time
Play/Pause – Either Earbud ka,
Answer /End Call – Either Earbud
Press 2 Times
Volume Up – Right Earbud
Volume Down – Left Earbud
Press and Hold 1 Second
Track Forward – Right Earbud
TrackBack – Left Earbud
Press 3 Times
Activate Assistant – Either Earbud
Press and Hold 3 Seconds
ANC On/Off – Either Earbud
Stay-Aware Mode – Either Earbud
Press 1 Time, then Press and Hold 1 Second
Pair New Device – Either Earbud

Having trouble?

Don’t return to the store. Let us help.
For product support, download the app or visit Skullcandy.com/Support/SeshANC
No audio in one earbud?
Let’s re-sync your earbuds. Place them in the charging case and ensure the LEDs both turn red. When removed, both earbuds should play audio. If not, return the earbuds to the case and follow the steps below.

1. On your device, open Bluetooth settings and turn Bluetooth OFF.
2. Remove both earbuds from the charging case. Make sure they are both powered ON.
3. Press BOTH earbuds 3 times. The LEDs will flash red/blue as the earbuds re-sync, once successful both earbuds will flash blue together 4 times.
4. On your device, turn your Bluetooth back ON and select “Sesh ANC” in your paired list if they have not automatically reconnected to your device.
5. LEDs in both earbuds will flash blue 1 time and a voice prompt will indicate when the earbuds have reconnected to your device.

Resetting your earbuds to resolve pairing issues.

1. On your device, open your Bluetooth settings and remove “Sesh ANC” from your paired devices list. Then turn Bluetooth OFF.
2. Remove both earbuds from the case. A tone will indicate that your earbuds are powered ON.
3. Press and hold both earbuds for 3 seconds.
4. Both earbuds will flash red 2 times and then blue 2 times, a tone will indicate a successful reset, and your earbuds will enter back into Pairing Mode.
5. On your device, open Bluetooth settings and turn Bluetooth ON. Select “Sesh ANC” and accept any PAIR or OK prompts to complete pairing.

Like your new earbuds?
Please leave a review at your retailer’s website or Skullcandy.com
2x press, 2-second hold to enter pairing Mode*

SIMPLIFY YOUR LISTENING™
Bluetooth® (v5.2)
Call, Track, and Volume Controls
Auto On /Connect
Use Either Bud Solo

SUPREME SOUND™
4 Microphone Digital Active Noise Canceling
Premium Audio Quality
Clear Voice Smart Microphone
Stay-Aware Mode
Custom EQ Modes

FEARLESS USE
Sweat/ Water Resistant
Tile™ Finding Technology
Rapid Charge: ANC ON: 10 min = 1.5 hrs

Safety information inside. Made in Vietnam. Skullcandy and other marks are registered trademarks of Skullcandy, Inc. All rights reserved. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Skullcandy, Inc. is under license. Contains a Li-ion battery. The battery must be recycled or disposed of properly.
Sesh ANC: True Black
MODEL: S2TEW/S2TEWL
FCC ID: Y22-S2TEW
IC: 10486A-S2TEW

This device complies with part 15 of the MC Rules. Operation is subject to the following two conditions (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Skullcandy.com/patent-information ©2021 Skullcandy, Inc.