S2JTW Jib True wireless earbuds
User Guide
Jib True wireless earbuds
Auto Pair Mode  | Auto Power- On  | Auto Power – Off |
Paring Mode  | Power- On  | Power -Of  |
Charge Earbuds  | Charge Case | Pairing Mode Left Side or Right Side ‘On Mode |
Charge Earbuds | Charge Case  | Paring Mode  |
| Paring Mode Left Side or Right Side *Off Mode | Pair New Device “Jib True” | Power- On |
Paring Mode  | PairNewDeace  | Power- On  |
| Power- Off Left Side and Right Side | Play/Pause  Left Side or Right Side | Track Forward  Right Side |
Power – Off  | Play/pause | Track Forward  |
TrackBack  | Volume Up  Right Side | Volume Down  Left Side |
TrackBack  | Volume Up  | Volume Down  |
Answer/End  Left Side or Right Side | Activate Voice Assistant Left Side or Right Side | Clear Paired Device  Left Side and Right Side ‘Off Mode |
Answer/end  | Activate Voice Assistant  | Reset Device  |
Questions Visit: www.skullcandy.com
Speaker Driver: 6mne-,
Impedance: 32 Ohms, THD <3%@1 KHz,
Voltage Regulation: 5V, 500mA,
Bluetooth®: 5.0;
Frequency Band: 2402MHz— 2480MHz,
Maximum Power: 8.9mw,
Weight: 63.5g.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statement
This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science, and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End-user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value is reported under this standard during product certification for use when properly worn on the head.
2 YEAR GLOBAL WARRANTY
The United States of America and Canada Prod4ct Purchases Only Skullcandy products are backed by a 2-year warranty Ii it doesn’t work the way we promised, we’ll make it right. For Grantee Claims, Questions and Terms & Conditions visit Skullcandy.com warranty or call us at 1-888-MY SKULL.
Product Purchases Outside The United States of America and Canada
Skullcandy products are backed by a 2-year warranty. If it doesn’t work the way we promised, we’ll make it right. For Gtkrantee Claims, Questions, and Terms & Conditions visit Skullcalcty.com warranty or email us at [email protected]
Warning: To avoid hearing damage, do not lister] at high volume levels.
Many electrical items can. repaired or _saving. naturaliesouses_ and the environment. If you do not recycle, equipment will end up in landfills where hazardous substances will le 4k out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed-out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed-out wheeled bin symbol) in your bin.
Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd), or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations the battery shall be disposed of separately from household waste. When this product reaches its end of life take it to a collection point designated by local authorities or return it to the purchase location for recycling or disposal.
Americas
Skullcandy, Inc.
6301 N Landmark Dr.
Park City, UT 84098 U.S.A.
Skullcandy.com
Europe
Skullcandy Europe BV
Postbus 425
5500AK Veldhoven Nederland
Skullcandy. eu
Contains a Li-ion battery. The battery must be recycled or disposed of properly.
Hardware Version: V02(Earbud) N1.6(Charge case)
Software Version: V2.0(Earbud) N19-07B7-00CC(Charge case)
R-C-Sku-S2JTW
:018-200234
Jib True MODEL: S2JTW S2JTWL
FCC ID: Y22-S2JTW
IC: 10466A-S2J1W
Made in China.
