Skullcandy S2JTW-N745 Jib True Wireless In-Ear Headphones User Guide
Auto Pair Mode
Auto Pair ModePairing Mode
Auto Power – On
Auto Power – OnPower-On
Auto Power – Off
Power-Off
Charge Earbuds
Charge Earbuds
Charge Case
Charge Case Battery Life
- Flash = Low Battery
- Flashes = Medium Battery
- Flashes = High Battery
Pairing Mode
Left Side or Right Side
*On Mode
*Not Connected To Device
Left Side or Right Side
*Off Mode
Pair New Device
“Jib True”
Left Side or Right Side
Power-On
Left Side and Right Side
Power – Off
Left Side and Right Side
Play/Pause
▶II Left Side or Right Side
Track Forward 
Right Side
Track Back 
Left Side
Volume Up
Right Side
Volume Down
Left Side
Answer/End
Left Side or Right Side
Activate Voice Assistant
Left Side or Right Side
Clear Paired Device
Clear Paired DeviceLeft Side and Right Side
*Off Mode
Questions Visit: www.skullcandy.com
Speaker Driver: 6mm, Impedance: 22 Oh Tis, THD <3%@1KHz, Voltage Regulation: SI/, 500mA, Bluetooth® S.O, Frequency Band: 2402MHz-2480MHz, Maximum Power: 10mw, Weight: 63.5g.
Maximum opera1ing temperature 45°C.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
ISED SAR Compliance Statement
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. End user must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when propel worn on the body.
Americas
Skullcandy, Inc
6301 N Landmark Dr.
Park City, UT 84098 U.S.A.
Skullcandy.com
Canada
Skullcandy Canada ULC
329 Railway St. Unit 205
Vancouver, BC. V6A 1A4 Canada
Skullcandy.ca
Europe
Skullcandy Europe BY
Postbus 425
5500AK Veldhoven Nederland
Skullcandy.eu
M~xico
Skullcandy Mexico S de RL de CV/vistoteles218
Polanco IV Seccion, Miguel Hidalgo
11550, Mexico City, Mexico
Skullcandy.mx
Contains Li-ion battery. Battery must be recycled or disposed of properly
Made in China.
Hardware Version: V04 (Earbud)/
V6.0 (Charging case)
Software Version: V0.95 (Earbud)/
V2.0.9957 (Charging case)
Jib True
MODEL: S2J1W
FCC ID: Y22-S2JTW
IC: 10486A-S2.J1W
