62560 2.0L Ford EcoBoost
Product Information
The 62560 Module is a high-performance product designed for the
2020-2023 2.0L Ford EcoBoost engine. It offers up to 45HP gain and
1-3 MPG fuel savings. The module is manufactured by
AgDieselSolutions.com and comes with a bypass plug for
troubleshooting purposes.
Product Usage Instructions
- Locate the MAP sensor on the top of the intake manifold on the
passenger side of the engine bay. Also, locate the T-MAP sensor on
the charge pipe towards the front, center of the engine bay. - Disconnect the stock MAP sensor connector by pulling back on
the locking tab and squeezing the connector release tab. - Utilize the portion of the Ag Diesel Solutions harness labeled
MAP. Connect the male connector to the MAP Sensor. Then connect the
ADS female connector to the stock male MAP Sensor connector. - Disconnect the stock T-MAP sensor connector by pulling back on
the locking tab and squeezing the connector release tab. - Utilize the portion of the Ag Diesel Solutions harness labeled
T-MAP. Connect the male connector to the T-MAP Sensor. Then connect
the female connector to the stock male T-MAP Sensor connector. - Remove the bypass plug from the Ag Diesel Solutions harness and
plug the harness into the module. Keep the bypass plug for
potential troubleshooting. - Mount the module box in a safe location using zip ties to
secure the wires and module away from extreme heat and moving
parts. Mounting the module with the connector down will help
prevent moisture from collecting into the module connector. - Connect the module switch harness. The module switch can be
secured in the engine compartment near the module or routed into
the cab. If mounting in the cab, route the switch through the
firewall and connect it to the module harness.
Important: This is a high-performance product.
Use at your own risk. Please read and understand the following
agreement and terms and conditions before using the product.
Disclaimer of Warranty and Limitation of
Liability: The product comes with a limited 3-year
warranty. If you do not agree with the agreement, you can return
the product within 30 days from the date of purchase for a full
refund, provided it is in a new and unused condition and in the
original packaging. By installing this product, you indicate that
you have read, understood, and accepted the terms and conditions of
this agreement.
Effective Date: 11/1/2022
62560 Module Installation Guide 2020-2023 2.0L Ford EcoBoost Up to 45HP Gain 1-3 MPG Fuel Savings
AgDieselSolutions.com
A bypass plug is included with the module for potential troubleshooting. Install bypass plug in module connector to return vehicle to stock functionality if needed
Make sure to push completely together until connector snaps
when using bypass plug.
20-23 2.0L Ford EcoBoost Engine Installation Instructions
1) LLocate MAP sensor on top offthe intake manifold on passenger
side of the engine bay. Locate the-T-MAP sensor on charge pipe towards the front, center of engine bay.
MAP Sensor
T-MAP Sensor
2) Disconnect stock MAP sensor connector by pulling back on
locking tab and squeezing the connector release tab.
3) Utilize the portion of the Ag Diesel Solutions harness labeled MAP.
Connect the male connector to the MAP Sensor. Then connect the ADS female connector to the stock male MAP Sensor connector..
4) Disconnect stock T-MAP sensor connector by pulling back on
locking tab and squeezing the connector release tab.
5) Utilize the portion of the Ag Diesel Solutions harness labeled T-MAP.
Connect the male connector to the T-MAP Sensor. Then connect the female connector to the stock male T-MAP Sensor connector.
6) Remove the bypass plug from the Ag Diesel Solutions harness, and plug the
harness into the module. Note: Keep the bypass plug for potential troubleshooting.
7)
Mount the module box in a safe location using the zip ties to
secure the wires and module away from any extreme heat and
moving parts. Note:Mounting the module with the connector
down will help prevent moisture from collecting into the
module connector.
8) Connect module switch harness. Based on preference, the
module switch can be secured in the engine compartment near the module or it can be routed into the cab. If mounting in the cab, route the Switch through the firewall and connect to the module harness.
Connected Module Switch Harness
THIS IS A HIGH PERFORMANCE PRODUCT. USE AT YOUR OWN RISK.
Do not use this product until you have carefully read the following agreement. This sets forth the terms and conditions for the use of this product. The installation of this product indicates that the BUYER has read and understands this agreement and accepts its terms and conditions
DISCLAIMER OF WARRANTY AND LIMITATION OF LIABILITY
PSI Power, Inc and its successors, distributors, jobbers, and dealers (hereafter “SELLER”) shall in no way be responsible for the product’s proper use and service. It is the installer’s responsibility to check for proper installation and if in doubt, contact the manufacturer. The SELLER assumes no liability regarding the improper installation or misapplication of its products. BUYER ACKNOWLEDGES IT HAS HAD THE OPPORTUNITY TO FULLY INSPECT THE PRODUCT. ACCORDINGLY, BUYER ACKNOWLEDGES THAT THE PRODUCT IS BEING SOLD IN “AS IS/WHERE IS” CONDITION AND WITH ALL FAULTS. EXCEPT AS OTHERWISE PROVIDED HEREIN, THERE ARE NO EXPRESS WARRANTIES WITH RESPECT TO THE GOODS, AND ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO, IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY ARE LIKEWISE HEREBY EXPRESSLY AND FULLY DISCLAIMED. SELLER SHALL NOT BE HELD LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WITH RESPECT TO THE PRODUCTS (INCLUDING, WITHOUT LIMITATION, LOST PROFITS, LOST SALES, LOSS OF PRODUCTION, PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OR DAMAGE RESULTING FROM INTERRUPTION OR FAILURE IN OPERATION OF THE PRODUCTS) AND BUYER HEREBY EXPRESSLY WAIVES AND DISCLAIMS ALL SUCH LIABILITY CLAIMS. THE BUYER ACKNOWLEDGES AND AGREES THAT THE DISCLAIMER OF LIABILITY CONTAINED HEREIN IS A MATERIAL TERM OF THE SALE OF THE PRODUCT AND, TO THE FULLEST EXTENT PERMITTED BY LAW, BUYER SHALL DEFEND, INDEMNIFY AND HOLD SELLER HARMLESS FROM ANY AND ALL CLAIMS, DEMANDS, CAUSES OF ACTION, CONTROVERSIES, LIABILITIES, FINES, LOSSES, COSTS AND EXPENSES (INCLUDING, BUT NOT LIMITED TO ATTORNEYS’ FEES, EXPERT WITNESS EXPENSES AND LITIGATION EXPENSES) ARISING FROM OR RELATED TO SELLER’S PRODUCTS.
LIMITED 3 YEAR WARRANTY
PSI Power, INC. (hereafter “SELLER”) warrants that the product supplied shall conform to SELLER’s specifications and shall be free from defects in design, material or workmanship for 3 years to the original BUYER. This warranty shall not be extended, transferred, assigned or varied except by a written instrument signed by SELLER and BUYER. Products that have been returned to SELLER during the warranty period and accompanied by a dated proof of purchase receipt, with shipping and handling paid by the BUYER, and found to be defective in design, material, or workmanship, in SELLER’s sole discretion, may be repaired or replaced at SELLER’s option and cost. All warranty claims hereunder are subject to approval by SELLER upon examination of the product. If the product is found not to be defective by SELLER, the product may be returned to BUYER at BUYERS cost. Under no circumstances shall the SELLER be liable for any labor charged or travel time incurred in diagnosis for defects, removal, or reinstallation of this product or any other expenses. This warranty is void on any products that show evidence of misapplication, negligence, improper installation, abuse, lack of proper maintenance or alteration from its original design.
IN THE EVENT THAT THE BUYER DOES NOT AGREE WITH THIS AGREEMENT, THE BUYER MAY PROMPTLY RETURN THIS PRODUCT, IN A NEW AND UNUSED CONDITION, IN THE ORIGINAL PACKAGING, WITH A DATED PROOF OF PURCHASE, TO THE PLACE OF PURCHASE WITHIN (30) DAYS FROM THE DATE OF PURCHASE FOR A FULL REFUND. THE INSTALLATION OF THIS PRODUCT INDICATES THAT THE BUYER HAS READ AND UNDERSTANDS THIS AGREEMENT AND ACCEPTS ITS TERMS AND CONDITIONS
Effective 11/1/2022
Home | AG Diesel Solutions
