08-V015-0493 Conductor Rail System 0813
Product Information: Disassembly Tool Program 0813
The Disassembly Tool Program 0813 is a set of two tools that aid
in the removal of a hanger clamp from the conductor rail. The tool
is designed to be used by specialized technicians only and requires
the use of personal protective equipment. The tool should only be
used under appropriate operating conditions, and falling conductor
rail system components may cause injury due to crushing of skin and
limbs if not installed properly. Further installation instructions
can be found in the operating instructions BAL0813-0007.
Product Usage Instructions:
- Slide Tool 1 up to the stopper between the conductor rail and
hanger clamp. - Press the conductor rail against Tool 1 or against the hanger
clamp, respectively. - Insert Tool 2 on the open side of the conductor rail. The
retaining clamp of the hanger clamp bends up. - Pull out the conductor rail.
- Remove Tool 2 from the open side of the conductor rail.
- In order to remove Tool 1, the tension spring of the retaining
clamp may need to be pushed away.
Note: Refer to Fig. 1-9 in the user manual for a visual
representation of the steps mentioned above.
Installation Instructions
Disassembly Tool Program 0813
Order No.: 08-V015-0493
DANGER!
Risk of injury due to crushing of skin and limbs! There is a risk of crushing of skin and limbs due to Spring force/gravity (stored energy). Falling conductor rail system components, if they have not been properly installed
or if operated under inappropriate operating conditions (e.g., environment that contains solvents).
Only allow installation to be conducted by specialized technicians. Wear personal protective equipment!
Further information on the installation of the conductor rail system can be found in the operating instructions BAL0813-0007!
The disassembly tool consists of two tools and is an aid for removing a hanger clamp from the conductor rail. Tool 1 is pushed between the hanger clamp and conductor rail, while Tool 2 opens the hanger clamp.
Fig. 1: Tool 1
Fig. 2: Tool 2
Slide Tool 1 up to the stopper between the conductor rail and hanger clamp (see Fig. 3).
Press the conductor rail against Tool 1 or against the hanger clamp, respectively (see Fig. 4). At the same time, insert Tool 2 on the open side of the conductor rail (see Fig. 6). The retaining clamp of the hanger clamp bends up (see Fig. 5).
MV0813-0014d-EN www.conductix.com
translated document
page 1 of 3
Installation Instructions
Disassembly Tool Program 0813
Fig. 4: Press the conductor rail against Tool 1 or against the hanger Fig. 3: Slide Tool 1 between the conductor rail and the hanger clamp clamp
Fig. 5: The retaining clamp of the hanger clamp bends up
Fig. 6: Insert Tool 2 on the open side of the conductor rail
Pull out the conductor rail. Remove Tool 2 from the open side of the conductor rail (see Fig. 8).
Fig. 7: The hanger clamp bends up
MV0813-0014d-EN www.conductix.com
Fig. 8: Remove Tool 2 from the open side of the conductor rail
translated document
page 2 of 3
Installation Instructions Disassembly Tool Program 0813
In order to remove Tool 1, the tension spring of the retaining clamp may need to be pushed away.
Fig. 9: Remove Tool 1
Use the QR code (“click” or “scan”) to see our animation Disassembly Tool.
Conductix-Wampfler GmbH Rheinstraße 27 + 33 79576 Weil am Rhein – Märkt Germany
Importer for the United Kingdom: Conductix-Wampfler Ltd. 1, Michigan Avenue Salford M50 2GY United Kingdom
Phone: +49 (0) 7621 662-0 Fax: +49 (0) 7621 662-144 [email protected] www.conductix.com
Phone: +44 161 8480161 Fax: +44 161 8737017 [email protected] www.conductix.com
MV0813-0014d-EN www.conductix.com
translated document
page 3 of 3
Conductix Wampfler Global | We move your business
MOV0813-0010 on Vimeo
