Vaxcel P0380 Beloit 12-inch Pendant Matte Installation Guide

P0380 Beloit 12-Inch Pendant Matte

Product Information

The product is a lighting fixture that requires assembly and
installation. The package includes an outlet box, a house ground
wire, a mounting strap unit (A), mounting screws (B), wire
connector (C), bolt nut (D), and a canopy kit. The fixture has an
adjustable length from 17 to 59 inches and requires a maximum of
60W Type A bulb (not included). The product is designed for use
with medium base bulbs and can be installed on angled or vaulted
ceilings.

Product Usage Instructions

1. Before starting the installation process, turn off the power at
   the fuse or circuit box.
2. Consult local electrical codes for wiring and grounding
   requirements.
3. Read and save the provided installation instructions for future
   reference.
4. Assemble the fixture by following the steps below:
   1. Thread the fixture wire through the lower rod and secure it
      onto the fixture using the threaded pipe.
   2. Thread the fixture wire through the middle rod and secure it
      onto the lower rod using the threaded pipe.
   3. Thread the fixture wire through the upper rod and secure it
      onto the middle rod using the threaded pipe. Note: Use fewer rods
      if a shorter length is desired.
   4. Thread the fixture wire through the canopy kit and secure the
      rod assembly to the set threaded pipe of the canopy kit.
   5. Attach the glass shade to the fixture and secure it with the
      socket ring.
5. Attach the mounting strap unit (A) to the outlet box using two
   mounting screws (B).
6. Attach the canopy kit to the mounting strap unit (A) by
   inserting the fixture mounting screws and secure it with two bolt
   nuts (D).
7. Install a 60W Max. medium base bulb (not included) by following
   the relamping label at the socket area or packaging for maximum
   wattage allowed.
8. For angled or vaulted ceilings, use the included coupling kit
   to mount the fixture at an angle.
9. After installation, turn on the power at the fuse or circuit
   box.
10. If any parts are damaged or missing, refer to the spare parts
    list provided in the manual for re-ordering options.

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

P0380

WARNING: TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. READ AND SAVE THIS INSTRUCTION.

Hardware Package (included):

Outlet Box House Ground Wire

Mounting Strap Unit (A) Mounting Screw (B) Wire Connector (C) Bolt Nut (D)
Installation Steps
Turn off the power at fuse or circuit box.

Wire Connector (C) Fixture Wire Green Ground Screw Mounting Strap (A) Lock Nut Fixture Mounting Screw Mounting Screw (B)
Fixture Ground Wire Canopy Kit
Bolt Nut (D)
Set Threaded Pipe

1. Rod Connections: a. Thread the fixture wire from the fixture through the lower rod, then secure the lower rod onto fixture using the threaded pipe. b. Thread the fixture wire through the middle rod, and then secure the middle rod onto the lower rod using the threaded pipe. c. Thread the fixture wire through the upper rod, and then secure the upper rod onto the middle rod using the threaded pipe. Note: Length adjustable from 17″ to 59″. Use fewer rods if shorter length is desired.
2. Thread the fixture wire through the canopy kit, then secure the rod assembly to the set threaded pipe of the canopy kit.
3. Attach the mounting strap unit (A) to outlet box by using two mounting screws (B).
4. Pull out the source wires from the outlet box. Make wire connections using wire connectors (C) as follows: —Connect the smooth-coated wire (marked) from the fixture to the black wire from the power source. —Connect the ribbed-coated wire (unmarked) from the fixture to the white wire from the power source. —Attach the fixture ground wire to the mounting strap unit (A) with the green ground screw, then connect it to the house ground wire with a wire connector (C). Carefully put the wires back into the outlet box.
5. Attach the canopy kit to the mounting strap unit (A) by inserting the fixture mounting screws, then secure it with two bolt nuts (D).
6. Attach the glass shade to fixture, then secure it with the socket ring.

Upper Rod Threaded Pipe Middle Rod Threaded Pipe Lower Rod Threaded Pipe Fixture
Glass Shade
Socket Ring Max.60W Type A Bulb (Not Included)

Page 1 / 2

220526

Fig. 1
Support Brace

7. Install 1 X 60W Max. medium base bulb (not included). See relamping label at socket area or packaging for maximum wattage allowed.
8. Angled mounting recommended for a vaulted or angled ceiling. Outlet Box (See Fig.1)
Canopy
Coupling Kit Turn on the power at fuse or circuit box.

The following parts are available for re-order if damaged or missing.

Spare Parts List:
Mounting Strap Unit (A) Mounting Screw (B) Wire Connector (C) Bolt Nut (D)

Mounting Hardware 6519MM (1 SET)

12″ Rod 3336RD

6″ Rod 3337RD

3″ Rod 3338RD

Glass Shade 10029CS

A: 17″ ~ 59″

A

B:12″

B
Page 2 / 2

220526