User Manual
39081 Holder for Mounting
MONTAGE
Loosen stem bolts. Replace two of the stem bolts with the bolts and spacers provided. Tighten the bolts evenly according to the recommended torque setting.
Universal holder designed for use only with stated compatible devices.
Always use this product only for the intended purpose. If the product is used improperly, it can cause undesirable damage, further property damage, or personal injuries.
The manufacturer is not responsible for any damages resulting from the use of the product in an improper way, in particular its improper use, or failure to comply with recommendations and warnings.
Any use of the product for any other purpose than that proper one is incorrect and the manufacturer is not responsible for the consequences caused by such conduct.
Furthermore, the manufacturer is not responsible for damage, to the product due to improper storage, incorrect operation, or use of the product in contravention with these manual instructions.
The manufacturer is not responsible for malfunction, limited functionality, damage, or destruction of the product due to improper replacement of the product parts, improper repair, or any non-standard modifications.
The manufacturer is not responsible for the loss or damage of the product during transport, bad weather, or other effects of weather conditions.
The manufacturer is not liable for damage or destruction of the product or for any damages incurred by the customer if the product is handled contrary to this manual. 
Dodavatel / Importer
KCK Cyklosport-Mode s.r.o., Bartogova 348, 765 02 Otrokovice-Kvitkovice, CZ
www.kckcyklosport.cz, www.force.bike
Zeme pavodu Cina / Made in China
