ACEFAST D8 Headrest Car Mount Holder

Dear customer,
Thank you for purchasing our product. Please read the following instructions carefully before first use and keep this user manual for future reference. Pay particular attention to the safety instructions. If you have any questions or comments about the device, please contact the customer line.
- ✉ www.alza.co.uk/kontakt
- ✆ +44 (0)203 514 4411
- Importer Alza.cz a.s., Jankovcova 1522/53, Holešovice, 170 00 Praha 7,
Product picture

Operating Instructions

- Unscrew the fixing nut behind the back clip, put the universal ball joint in and then tighten the nut.
- Unscrew the fixing lock of the headrest mount, adjust the headrest mount to a proper width, snap it into the headrest column and tighten the lock.
- Open the clamp arms, pull the spring clamp, place the mobile phone or tablet, adjust it to a comfortable viewing angle.
- When you are not using the stand, please fold the clamp arms to avoid injury.
Specification
| Model | D8 |
| Colour | Black |
| Material | Plastic, silicone, metal alloy |
| Place of mount | In-car headrest |
| Size | Back clip size: 165x37x67mm / 6.50×1.46×2.64in Headrest mount size: 214x106x31mm / 8.43×4.17×1.22in Product size: 214x130x67mm / 8.43×5.12×2.64in |
| Weight | Back clip weight: About 140g / 4.94oz Headrest mount weight: About 110g / 3.88oz Product weight: About 250g / 8.82oz |
Precautions
- Do not disassemble or modify this product by yourself.
- Do not place this product in a humid environment.
- Please do not charge near a heat source.
- Do not allow water or other liquids to flow into the product, otherwise it will cause damage to the product.
- Do not install this product in the area where the airbag is located.
- Do not drop.
- Do not scratch the surface of this product with sharp objects to avoid surface damage
Warranty Conditions
A new product purchased in the Alza.cz sales network is guaranteed for 2 years. If you need repair or other services during the warranty period, contact the product seller directly, you must provide the original proof of purchase with the date of purchase.
The following are considered to be a conflict with the warranty conditions, for which the claimed claim may not be recognized:
- Using the product for any purpose other than that for which the product is intended or failing to follow the instructions for maintenance, operation, and service of the product.
- Damage to the product by a natural disaster, the intervention of an unauthorized person or mechanically through the fault of the buyer (e.g., during transport, cleaning by inappropriate means, etc.).
- Natural wear and aging of consumables or components during use (such as batteries, etc.).
- Exposure to adverse external influences, such as sunlight and other radiation or electromagnetic fields, fluid intrusion, object intrusion, mains overvoltage, electrostatic discharge voltage (including lightning), faulty supply or input voltage and inappropriate polarity of this voltage, chemical processes such as used power supplies, etc.
- If anyone has made modifications, modifications, alterations to the design or adaptation to change or extend the functions of the product compared to the purchased design or use of non-original components.
EU Declaration of Conformity
Identification data of the manufacturer’s / importer’s authorized representative:
Importer: Alza.cz a.s.
Registered office: Jankovcova 1522/53, Holešovice, 170 00 Prague 7
CIN: 27082440
Subject of the declaration:
Title: Mobile phone holder
Model / Type: Acefast-D8
The above product has been tested in accordance with the standard(s) used to demonstrate compliance with the essential requirements laid down in the Directive(s):
Directive No. 2014/53/EU
Directive No. 2011/65/EU as amended 2015/863/EU
WEEE
This product must not be disposed of as normal household waste in accordance with the EU Directive on Waste Electrical and Electronic Equipment (WEEE – 2012/19 / EU). Instead, it shall be returned to the place of purchase or handed over to a public collection point for the recyclable waste. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. Contact your local authority or the nearest collection point for further details. Improper disposal of this type of waste may result in fines in accordance with national regulations.



















