APW-THFCCM01B Mechanical Headrest Mount
User Manual
APW-THFCCM01B Mechanical Headrest Mount
THANK YOU FOR CHOOSING US!
We value your trust. We hope that you will be happy with our product, and as excited about it as we are. We try to offer products of the highest quality that satisfy even the most demanding requirements. If you are satisfied, it would make us very happy if you chose us again the next time you make a purchase.
We are environmentally conscious, therefore we use special eco-friendly packaging. Please recycle!
Recycling and Environmental Protection
We try to avoid using plastic packaging and film and only use them when they are absolutely necessary to protect the product. So how are we different?
Packaging you can eat… Well, almost. 🙂
We use ink made from soybeans as opposed to classic petroleum-based ink.The majority of our packaging is made from 100% recyclable paper.We limit the use of adhesives. If absolutely necessary, we make sure to choose only water-soluble ones.
We think globally, which means that we actively search for eco-friendly solutions. We keep an eye on trending technology and place findings of the scientific community into practice.
We don‘t just try to meet quotas and mandates, we aim to exceed them.
TECHNICAL PARAMETERS
| Minimum phone diagonal | 7“ (17.78 cm) |
| Maximum phone diagonal | 10.5“ (26.67 cm) |
| Minimum phone width | 155 mm |
| Maximum phone width | 305 mm |
| Carrying capacity of the holder | 300 g |
| Designated use | Car seat backrest |
| Attachment type | Opening handle |
| One-handed attachment/release | Yes |
| Storage temperature | -20–70 °C |
| Storage humidity | < 90 % |
| Dimensions | 18 × 11.7 × 7.5 cm |
| Weight | 196 g |
OVERVIEW
- Clamping arms (located on both sides)
- Phone holder
- 360° ball head joint
- Spread
- Hook (not pictured)
- Nut (not pictured)
INSTRUCTIONS
- Screw the nut onto the ball head.
- Screw the phone holder onto the ball head and screw in the nut.
- Adjust the head rest to the desired position.
- Insert the bracket between the head rest bars.
- Open the arms and insert your phone or tablet into the holder. Push the arms together6. Set the desired angle.
SAFETY INFORMATION
- Read all instructions carefully before use.
- This product is not a toy. It may contain small components. Please keep away from children.
- Always focus on the road!
- Use the product only for the purpose for which it is intended.
- Do not disassemble or modify the product. Unprofessional modifications can damage it.
- Use only a soft, clean and dry cloth for cleaning.
WARRANTY & SUPPORT
Your new product is protected by our 24-month warranty, or extended warranty (if stated), which you can apply at any of our points of sale. For inquiries, you can use the contact form or one of our international call centres.
This product meets all of the related basic EU regulation requirements. The EU declaration of conformity is available on www.alzashop.com/DoC.
This product sold in the European Union meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS).
The use of the WEEE Symbol indicates that this product should not be treated as household waste. By ensuring this product is disposed of correctly, you will help pro- tect the environment. For more detailed information about the recycling of this product, please contact your local authority, your household waste disposal service provider, or the shop where you purchased the item.
“For indoor use only” symbol indicates that the product is not intended for outdoor use.
www.alzapower.com
Co. Reg. No. 27082440
Alza.cz a.s., Jankovcova 1522/53, 170 00 Prague 7, Czech Republic
© 2022 Alza.cz a.s. All Rights Reserved.
Alza | Alzashop.com
