WASHLET Bidet Toilet System

WASHLETTM Product Information and Usage Instructions

Product Information

The WASHLETTM is an electronic device designed to provide a
comfortable and hygienic cleansing experience after using the
toilet. It is essential to follow the care instructions to ensure
the device’s proper functioning and longevity.

Care Instructions

Please note the following care instructions:

1. Remove all traces of water and cleanser and prevent water or
   cleansing steam from getting inside the device.
2. Avoid applying excessive pressure or pulling force on the
   covers or wand jet.
3. Turn off the power switch before cleaning.
4. Only use a soft cloth moistened with water to clean the
   device.
5. If the device is very dirty or soiled, use a cloth moistened
   with a diluted neutral cleanser to clean it.

Usage Instructions

Clean WASHLETTM attachment (recommended daily)

It is recommended to clean the WASHLETTM attachment daily or
immediately once you notice any stains or soil.

1. Wipe the surface of the WASHLETTM seat with a soft, damp cloth
   and a neutral cleanser if necessary.
2. Wipe the inside and outside of the WASHLETTM lid as well.
3. Clean the sides, back, and areas where WASHLETTM touches the
   ceramic toilet bowl if possible.

Clean WASHLETTM wand jet (recommended approx. once a
month)

1. Use the cleaning program to extend the WASHLETTM wand jet.
2. Clean the wand jet with a soft, damp cloth. If it is very
   dirty, use a neutral cleanser for cleaning.
3. Retract the WASHLETTM wand jet again.

Clean deodorizing filter (recommended approx. once a
month)

1. Remove the deodorizing filter and gently brush it with a
   toothbrush.
2. If the filter is very dirty, rinse it with water. Ensure that
   the filter is completely dry before replacing it.

Clean the areas where the WASHLETTM attachment comes into
contact with the lid (recommended approx. once a month)

1. Remove the WASHLETTM lid.
2. Clean the areas where the WASHLETTM lid comes into contact with
   the attachment with a soft, damp cloth.
3. Use a neutral cleanser or a cotton swab as needed.
4. Replace the WASHLETTM lid correctly.

WASHLETTM CARE INSTRUCTION
Please note:
1. WASHLETTM is an electronic device. Be sure to remove all traces of water and cleanser, and prevent water or cleansing steam from getting inside the device (this could damage the plastic parts or cause malfunctions).
2. Avoid applying excessive pressure or pulling force on the covers or wand jet (this could result in damage or malfunctions). 3. Be sure that the power switch is turned to “OFF” prior to cleaning (please see the instruction manual for details on how to
switch off WASHLETTM). 4. Only use a soft cloth moistened with water to clean WASHLETTM (NO toilet paper, dry cloths, microfibre, sponges or
brushes as these can scratch the surface or generate static electricity, which could potentially cause malfunctions). 5. If WASHLETTM is very dirty or soiled, you can also use a cloth moistened with a diluted neutral cleanser to clean it. Follow up
by wiping with a damp cloth to ensure that no cleanser residue remains on the surface.
Clean WASHLETTM attachment (recommended daily)
Clean WASHLETTM regularly or immediately once you notice any stains or soil. It is easier to clean WASHLETTM if you keep stains and waste from accumulating.
1. Wipe the surface of the WASHLETTM seat with a soft, damp cloth, and also use a neutral cleanser if necessary.

2. Wipe the inside and outside of the WASHLETTM lid as well.

TOTO Europe GmbH eu.toto.com

3. Be sure to also clean the sides, back and areas where WASHLETTM touches the ceramic toilet bowl (if possible).
1/3

09 / 2022

Clean WASHLETTM wand jet (recommended approx. once a month)
1. Use the cleaning programme to extend the WASHLETTM wand jet. (The steps for extending the WASHLETTM wand jet may vary depending on the model. Please see the instruction manual for details on how to extend the WASHLETTM wand jet).
2. Clean the wand jet with a soft, damp cloth. If it is very dirty, you can also use a neutral cleanser for cleaning. (Avoid applying excessive pressure or pulling force on the wand jet as this could cause damage or malfunctions.)
3. Retract the WASHLETTM wand jet again.
Clean deodorizing filter (recommended approx. once a month)
The deodorizing filter is located on the side of WASHLETTM towards the back (please see the instruction manual for details on how to remove the filter).
1. Remove the deodorizing filter (coarse filter) and gently brush it, e.g. with a toothbrush.
2. If the filter is very dirty, you can also rinse it with water. Please be sure that the filter is completely dry before replacing it.

IMPORTANT: The process of removing the WASHLETTM lid differs depending on the model. Please see the instruction manual for details.

Clean the areas where the WASHLETTM attachment comes into contact with the lid (recommended approx. once a month)

Be sure to use the correct angle
Vertical

Hold with both hands

1. Remove the WASHLETTM lid (please see the instruction manual for details on how to remove the WASHLETTM lid).

90° C

2. Clean the areas where the WASHLETTM lid comes into

B

contact with the attachment with a soft, damp cloth.

A

Use a neutral cleanser or a cotton swab as needed.

D E

3. Replace the WASHLETTM lid correctly.

2/3
TOTO Europe GmbH eu.toto.com

09 / 2022

Clean the space between WASHLETTM and the toilet bowl by lifting it* (recommended approx. once a month)
You can remove the WASHLETTM attachment to clean the top of the toilet bowl and the bottom of the WASHLETTM attachment.
1. Press the button to remove the WASHLETTM attachment and lift it slightly. (Please see the instruction manual for details on how to lift the WASHLETTM attachment).
2. Clean the space with a soft, damp cloth and a neutral cleanser. Then wipe it off with a soft, damp cloth to ensure that no cleanser residues are left behind.
3. Replace the WASHLETTM attachment correctly. Please be sure that the power cord and water hose
*applies only to WASHLETTM RW, SW, RG and RG Lite
3/3
TOTO Europe GmbH eu.toto.com

09 / 2022