Startech Com Rk319wallv 19 Inch Vertical Wall Mount Rack Bracket User Guide (+ PDF)

Home » Blog » Startech Com Rk319wallv 19 Inch Vertical Wall Mount Rack Bracket User Guide

Contents hide

1 RK319WALLV 19 Inch Vertical Wall Mount Rack Bracket

2 Product Information: Quick-Start Guide 19in Vertical Wall Mount Rack Bracket

3 Product Usage Instructions

3.1 Installation

3.2 Regulatory Compliance

3.3 Warranty Information

3.4 Limitation of Liability

3.5 Documents / Resources

3.5.1 References

RK319WALLV 19 Inch Vertical Wall Mount Rack Bracket

Product Information: Quick-Start Guide 19in Vertical Wall Mount
Rack Bracket

The Quick-Start Guide 19in Vertical Wall Mount Rack Bracket is
designed to securely mount equipment to a wall. The product is
available in multiple sizes, including RK119WALLV, RK219WALLV,
RK319WALLV, RK419WALLV, RK519WALLV, and RK619WALLV. The mounting
holes are spaced 16 inches (2 inner holes) and 18.8 inches (4 outer
holes) apart. The product includes M5 Square Cage Nuts and M5
Screws for installation on wood surfaces.

Product Usage Instructions

Before assembling and/or using the product, read the entire
Quick-Start Guide and ensure the instructions are fully understood.
Ensure that all parts are present and undamaged before operating
the product. Visit www.startech.com/support for manuals, FAQs,
videos, drivers, downloads, technical drawings, and more.

Ensure that the weight of the equipment does not exceed the
weight capacity of the product. The product can support a certain
weight depending on the size of the product. Ensure that the type
of wall structure and mounting hardware will properly support the
mounted equipment. The wall or mounting structure should be capable
of supporting at least four times the weight of the mounted
equipment.

Installation

1. Test fit the Rack Bracket on the surface to ensure proper fit
on the designated location.

2. Mark the Mounting Points (x6) using the Mounting Holes (x6)
on the Wall Bracket as a Template.

3. Use the Wood Screws (x6) to fasten the Wall Bracket to the
Mounting Surface. The included screws are for wood surfaces
only.

4. Install the M5 Square Cage Nuts onto the desired Square Cage
Nut Holes where the Equipment will be installed. Use a Cage Nut
Tool if available or your preferred installation method.

5. Use a Phillips Head Screwdriver to install the M5 Screws and
secure the Equipment onto the Mounting Rails.

Regulatory Compliance

The product is compliant with relevant regulations and
standards.

Warranty Information

The product is backed by a lifetime warranty. For further
information on product warranty terms and conditions, please refer
to www.startech.com/warranty.

Limitation of Liability

The manufacturer is not liable for any damages or personal
injury resulting from the use of this product.

View Fullscreen

Quick-Start Guide

19in Vertical Wall Mount Rack Bracket

Product IDs
· RK119WALLV / RK119WALLV2 · RK219WALLV · RK319WALLV / RK319WALLV2 · RK419WALLV / RK419WALLV2 · RK519WALLV · RK619WALLV
Product Diagram
1
2

Product ID
RK119WALLV / RK119WALLV2 RK219WALLV
RK319WALLV / RK319WALLV2 RK419WALLV / RK419WALLV2
RK519WALLV RK619WALLV

M5 Square Cage Nuts Quantity
x 4 x 8 x 12 x 16 x 16 x 16

M5 Screws Quantity
x 4 x 8 x 12 x 16 x 16 x 16

Requirements
For the latest manuals, product information, technical specifications, and declarations of conformance, please visit:

www.StarTech.com/RK119WALLV www.StarTech.com/RK219WALLV www.StarTech.com/RK319WALLV www.StarTech.com/RK419WALLV www.StarTech.com/RK519WALLV www.StarTech.com/RK619WALLV

www.StarTech.com/RK119WALLV2 www.StarTech.com/RK319WALLV2 www.StarTech.com/RK419WALLV2

*Product may vary from image
Component

Function

· Appropriate mounting hardware for the wall or surface type · Phillips head screwdriver · Cage nut tool (Optional)

1 Mounting Rails

· Features Square Cage Nut Holes to mount the equipment

Warnings!

Read the entire Quick-Start Guide and ensure the instructions are fully understood

2 Wall Bracket

· Mounting Holes along the Wall Bracket are used to Fasten it to a Wall

before assembling and/or using this product. Before adding equipment to this product, ensure this product has been properly

Package CoTno vtieewntmsanuals, FAQs, videos, drivers, downloads, technical drawings, and mmoroeu, nvtiseidt.www.startech.com/support.

· Wall-Mount Bracket x 1

Never operate this product if parts are missing or damaged.

· Wood Screws x 6

The mounting hardware included with this product might not be adequate for some wall or mounting structures. If lacking the necessary expertise to mount this product,

· Quick-Start Guide x 1

contact a construction professional to install the Wall Rack Bracket or to provide

specific mounting instructions for the wall structure.

To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support

Manual Revision: February 27, 2023 2:56 PM

Ensure the weight of the equipment does not exceed the weight capacity of this product. If the weight capacity is exceeded, personal injury or damage to the equipment are possibilities. These products can support the following weight:
· RK119WALLV: Rev 01 to 02 – Up to 125 lbs / 56kg; Rev 03 or above – Up to 130 lbs / 59kg · RK119WALLV2: Up to 130 lbs / 59kg · RK219WALLV: Up to 125 lbs / 56kg · RK319WALLV: Rev 01 to 02 – Up to 125 lbs / 56kg; Rev 03 or above – Up to 150 lbs / 68kg · RK319WALLV2: Up to 150 lbs / 68kg · RK419WALLV: Rev 01 to 02 – Up to 125 lbs / 56kg; Rev 03 or above – Up to 180 lbs / 81kg · RK419WALLV2: Up to 180 lbs / 81kg · RK519WALLV: Up to 198 lbs / 90kg · RK619WALLV: Up to 200 lbs / 90kg
Ensure the type of wall structure and mounting hardware will properly support the mounted equipment. Failure to do so might result in personal injury and/or equipment damage. The wall or mounting structure should be capable of supporting at least four times the weight of the mounted equipment.

Installation
Mount the Rack Bracket
The mounting holes are spaced 16 inches (2 inner holes) and 18.8 inches (4 outer holes) apart. Test fit the Rack Bracket on the surface to ensure proper fit on the designated location.
1. Mark the Mounting Points (x6) using the Mounting Holes (x6) on the Wall Bracket as a Template.
2. Use the Wood Screws (x6) to fasten the Wall Bracket to the Mounting Surface.
The included screws are for wood surfaces only.
3. Install the M5 Square Cage Nuts onto the desired Square Cage Nut Holes where the Equipment will be installed. Use a Cage Nut Tool if available or your preferred installation method.
4. Use a Phillips Head Screwdriver to install the M5 Screws and secure the Equipment onto the Mounting Rails.

Regulatory Compliance
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of thirdparty companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders. PHILLIPS® is a registered trademark of Phillips Screw Company in the United States or other countries.
Warranty Information
This product is backed by a lifetime warranty. For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.

StarTech.com Ltd.
45 Artisans Crescent London, Ontario N5V 5E9 Canada

StarTech.com LLP
4490 South Hamilton Road Groveport, Ohio 43125 U.S.A.

StarTech.com Ltd.
Unit B, Pinnacle 15 Gowerton Road Brackmills, Northampton NN4 7BW United Kingdom

StarTech.com Ltd.
Siriusdreef 17-27 2132 WT Hoofddorp The Netherlands

FR: startech.com/fr DE: startech.com/de ES: startech.com/es NL: startech.com/nl IT: startech.com/it JP: startech.com/jp