Starwell Technology Pe-c30da42 30w Dali Dimmable Led Driver Instruction Manual

PE-C30DA42 30W DALI Dimmable LED Driver

Product Information:

The PE-C30DA 30W Class 2 DALI Dimming LED Driver is a constant
current LED driver developed by the company. It has a high power
factor, high efficiency, and high precision. The driver uses an
efficient stable low loss switch control chip and high-performance
components, resulting in low noise and long life. It also features
over-heat protection, over load protection, and short circuit
protection.

Features:

• Power Factor (PF) > 0.95
• Efficiency > 0.85
• DIM and Push DIM functions
• No Flicker
• DALI and 0-10V dimming interfaces

Dimming Interfaces:

1. DALI Dimming: Uses a standard DALI signal interface and can be
   matched with any DALI control system in the market. DALI stands for
   Digital Addressable Lighting interface.
2. PUSH Dimming: Can be connected to normally open doorbell
   switches on the market for dimming.

Model Information:

Input Specifications:

• Input Voltage Range: 100-250Vac
• Frequency: 50/60Hz
• Input Current: 0.95/100V, 85% full load; 86% full load; 87%
  full load
• Inrush Current (typical): Cold start 3.7A@230Vac
• Anti Surge: L-N: 2kV
• Leakage Current: [Leakage current information is missing from
  the provided text]

Product Usage Instructions:

To use the PE-C30DA 30W Class 2 DALI Dimming LED Driver, follow
these steps:

1. Connect the driver to the LED lighting fixture, ensuring
   correct polarity.
2. If using DALI dimming, connect the driver to a standard DALI
   signal interface compatible with your DALI control system. If using
   PUSH dimming, connect the driver to a normally open doorbell
   switch.
3. Ensure the input voltage range is within 100-250Vac and the
   frequency is either 50Hz or 60Hz.
4. Turn on the power supply to the driver.
5. Use the appropriate dimming method (DALI or PUSH) to control
   the brightness of the LED lighting fixture.
6. For DALI dimming, refer to your DALI control system’s user
   manual for instructions on setting up and controlling the
   dimming.
7. For PUSH dimming, use the connected doorbell switch to adjust
   the dimming level.

Note: Please refer to the complete user manual for detailed
instructions and safety precautions.

PE-C30DA 30W
Class 2

DALI Dimming LED Driver (Constant Current)
Features:
Standard DALI dimming interface With PUSH function to realize PUSH dimming Output Áicker free International universal AC input voltage (100V to 265VAC) Protections: short circuit/over voltage/over current Silica gel heat conduction technology,natural cold wind Suitable for LED home lighting and commercial lighting Safe no load protection device Ultra small volume Operating ambient temperature up to 55 degrees Protection class II Three years warranty

PF>0.95

>0.85

DIM

Push DIM

Member

No Flicker

Over-heat Protection

Over Load Protection

Short Circuit Protection

General description:
DALI Dimming LED Driver is one of the constant current dimming LED driver developed by my company with high power factor ,high efficiency, high precision, the use of the efficient stable low loss switch control chip and the high performance components makes it with low noise ,long life and other characteristics.
PE-C30DA has DALI and 0-10V two dimming functions.
Dimming interface: 1. DALI dimming . use standard DALI signal interface,can match with all DALI control system in the market. DALI full name: Digital Addressable Lighting interface
2. PUSH dimming.It can be connected to all normally open doorbell switches on the market for dimming

Model

PE-C30DA4245

PE-C30DA4250

PE-C30DA4260

Output Voltage Max Output Voltage

9-42Vdc 42Vdc

9-42Vdc 42Vdc

9-42Vdc 42Vdc

Non-load Output Voltage 55Vdc

55Vdc

55Vdc

OUTPUT

Output Current Output Power Strobe Level

450mA 4.05W~18.9W No Flicker

500mA 4.5W~21W

600mA 5.4W~25.2W

Dimming Range

0~100%LEDstart at 0.03%possible.

PWM Dimming Frequency >3600Hz

Current Accuracy

±3%

Ripple & Noise Dimming Interface

2VNo dimming DALI (IEC62386), Push

Input Voltage Range

100-250Vac

Frequency

50/60Hz

Input Current

<0.32A

<0.32A

<0.32A

INPUT

Power Factor THD

PF>0.95/100Vac, at full load PF>0.95/100V 230Vac@THD 15% (full load)

PF>0.95/100V

85%full load

86%full load

87%full load

Inrush Current(typ.)

Cold start 3.7A@230Vac

Anti Surge

L-N: 2kV

Leakage Current

<0.25mA/230Vac

Working Temperature

ta: 55 °C tc: 80°C

Working Humidity

20 ~ 95%RH, non-condensing

ENVIRONMENT Storage Temp., Humidity -40 ~ 80°C, 10~95%RH

±0.03%/°C(0-5)0°C

Vibration

10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes.

Over Load Protection

Shut down the output when rated power102%, auto recovers.

PROTECTION Short Circuit Protection Shut down automatically if short circuit occurs, auto recovers.

Non-load Protection

output Constant Voltage.

Withstand Voltage

I/P-O/P: 3750Vac

Isolation Resistance

I/P-O/P: 100M/500VDC/25°C/70%RH

SAFETY & Safety Standards

IEC/EN61347-1, IEC/EN61347-2-13

EMC

EMC Emission EMC Immunity

EN55015, EN61000-3-2 Class C, IEC61000-3-3 EN61000-4-2,3,4,5,6,8,11, EN61547

Strobe Test Standard

IEEE 1789

Dimension

73.2×46.2×27mm(L×W×H)

OTHERS Packing Weight(G.W.)

PE bag 150g±10g

PE-C30DA4270 9-42Vdc 42Vdc 55Vdc 700mA 6.3W~29.4W
<0.32A PF>0.95/100V 88%full load

Dimensions :

61.7mm

DALI Dimming LED Driver (Constant Current)

25mm D=78mm

73.2mm

46.2mm

27mm

Made in China

Max.output: 48Vdc Zhongshan AiDimming Electronics Co.,L TD.

tc

L Brown PRI AC100-250V N Blue
RED+ SEC LED
BLACK-

170mm 155mm

Constant C urrent Dimming L ED Driver

Model:PE-C30DA42

Dimming interface: 1 DIM: DALI 2 DIM: PUSH

PRI:100-250V~ 50/60Hz 0.16A SEC: 9 – 42VDC 700mA ±5%

PF:0.93 ta=-20…+55 tc=85

RoHS

175mm

Product Label:

L Brown PRI AC100-250V
N Blue

Constant Current Dimming LED Driver

Dimming interface: 1 DIM: DALI 2 DIM: PUSH
RoHS

Model:PE-C30DA42

tc

PRI:100-250V~ 50/60Hz 0.16A SEC: 9 – 42VDC 700mA ±5%

Made in China

PF:0.93 ta=-20…+55 tc=85

Max.output: 48Vdc

.

34mm

RED+
SEC LED
BLACK-

LED Current Selection:
Dali DIM Connection

55mm

Push DIM Connection

Made in China

tc Made in China

Max.output: 48Vdc Zhongshan AiDimming Electronics Co.,L TD.

PF:0.93 ta=-20…+55 tc=85

tc

PRI:100-250V~ 50/60Hz 0.16A SEC: 9 – 42VDC 700mA ±5%

Constant C urrent Dimming L ED Driver

Max.output: 48Vdc Zhongshan AiDimming Electronics Co.,L TD.

PF:0.93 ta=-20…+55 tc=85

Model:PE-C30DA42 PRI:100-250V~ 50/60Hz 0.16A SEC: 9 – 42VDC 700mA ±5%

Constant C urrent Dimming L ED Driver

L Brown PRI AC100-250V N Blue
RED+ SEC LED
BLACK-

L Brown PRI AC100-250V N Blue
RED+ SEC LED
BLACK-

Model:PE-C30DA42

0-100%dimming
DALI L N

Dimming interface: 1 DIM: DALI 2 DIM: PUSH

RoHS

0-100%dimming
L N

RoHS

Dimming interface: 1 DIM: DALI 2 DIM: PUSH

Push Dimming:

On/off control: Short press. Stepless dimming: Long press. With every other long press, the light level goes to the opposite direction. Dimming memory: Brightness will be the same as previously adjusted when turning off and on again.

Wiring:
1.DALI interface: DALI is a digital addressable lighting interface,which is directly connected with Dali control system, and the signal line is not divided into positive and negative poles.
2.PUSH interface:AC voltage is connected to Dali two ports through a switch with automatic reset to realize key dimming.
3.The input terminal:wire gauge length 150-160mm 20AWG, wire stripping requirement:7-10mm.the signal wire gauge length 170-180mm 22AWG ,wire stripping requirement:6-7mm.
4.The output terminal:wire gauge length 170-180mm 22AWG ,wire stripping requirement:6-7mm.

Relationship Diagrams:

THD vs Load

Power Factor Characteristic

Current vs Voltage

30%

25%

0.95

90

60

85

50

20%

0.9

80

40

VO[V]

0.85

75

30

10%

450mA 700mA

500mA

600mA

0.8 0.75

70

65

450mA

500mA

600mA

700mA

60

20

450mA

500mA

600mA

10

700mA

0% 50%

60%

70%

80%

90%

100%

0.7 50%

60%

70%

80%

90%

100%

55

50%

60%

70%

80%

90%

100%

0 450 500 600 700

Load [%]

Load [%]

Load [%]

IO[MA]

Dimming curve
100 90 80 70 60 50 40 30 20 10
0
Input signal[V]

THD[%] PF

Luminance ratio[%] 0.00 1.33 1.44 1.55 1.66 1.77 1.88 1.99 2.10 2.21 2.32 2.43 2.54 2.65 2.76 2.87 2.98 3.09 3.20 3.31 3.42 3.53 3.64 3.75 3.86 3.97 4.08 4.19 4.30 4.41 4.52 4.63 4.74 4.85 4.96 5.07 5.18 5.29 5.40 5.51 5.62 5.73 5.84 5.95 6.06 6.17 6.28 6.39 6.50 6.61 6.72 6.83 6.94 7.05 7.16 7.26 7.37 7.48 7.59 7.70 7.81 7.92 8.03 8.14 8.25 8.36 8.47 8.58 8.69 8.80 8.91 9.02 9.13 9.24 9.35 9.46 9.57 9.68 10.00

The use of guidance:

DALI Dimming LED Driver (Constant Current)

The abnormal conditions and the corresponding treatment methods:
Statement:
Digital Addressable lighting Interface (DALI) DALI slave unit will send data only master unit requests, that is, adopt command answering mode There are 64 slave units at most in the same DALI network, each unit has a separate address(short address), A salve unit can also be assigned to a certain group, and a slave unit can belong to different group, salve unit can exist up to 16 groups at the same time, each unit can set 16 scenarios. The main features of the DALI protocol 1)Asynchronous serial communication. 2)1200 baud rate, using the Manchester encoding format. 3)Two lies differential signal. 4)The high level when differential voltage is larger than 9.5V. 5)The low level when differential voltage is less than 6.5V. 6)The master unit controls communication process. 7)One DALI bus can connect with 64 slave units. 8)Each slave unit can be individually addressed. DALI Electrical Specification Under the idle state, from machine unit method to control the bus 1)High Output power at ordinary time, not to interference in the hold signal. 2)Output low electricity at ordinary time, directly to the DALI bus short circuit to each other. 3)DALI bus maximum current of 250mA 4)Not a two-way communication at the same time. 5)Transmission cable up to 300 meters, or pressure drop is no more than 2v