Fire Rated GR2 Cylindrical Lock
Product Information: Fire Rated GR2 Cylindrical Lock
- Door thickness: 1-3/8″ to 1-3/4″
- Backset: 2-3/4″
- Faceplate width: 1-1/8″
- Hole diameter: 2-1/8″
- Number of holes: 1
- Rose support plate included
- Fire rated
Product Usage Instructions:
- Prepare the door for installation.
- Install the latch and ensure proper mesh with the rose support
plate. - Install the lock.
- Install the rose and lever.
- Install the strike onto the frame using provided combo
screws.
Re-Handing Instruction: Locks with handed
levers are shipped right-handed (RH). To change the handing, remove
the lever by inserting a pin through the hole in front of the
lever.
Outside Trim: This lock is available for both
left-hand (LH/LHR) and right-hand (RH/RHR) doors.
For more information, please contact PDQTEC at 833-2-PDQTEC or
visit their website at www.pdqlocks.com.
SF INSTALLATION INSTRUCTION
FIRE RATED GR2 CYLINDRICAL LOCK
1-3/8″ to 1-3/4″ DOOR THICKNESS
2-1/4″
1″ HOLE
1-1/8″ FACEPLATE WIDTH
2-1/8″ HOLE
2-3/4″ BACKSET
Phone: 833-2-PDQTEC | www.pdqlocks.com
1. PREPARE DOOR
· Full machining templates can be found on website: www.pdqlocks.com
· Minimum stile width = 4 ¼”
2. INSTALL LATCH
· Install latch into front of door with bevel pointing toward door frame
· Secure using two combo screws
ROSE SUPPORT PLATE
ENSURE PROPER
MESH
3. INSTALL LOCK
· Lock is preset from the factory for 1-3/4″ thick door. To adjust, spin threaded rose until chassis is centered in door.
· Install lock chassis into thru hole in door making sure to properly engage ears of latch into lock chassis.
· Install rose support plate and secure with (2) screws.
SF10302 Rev1 7/27/22
SF INSTALLATION INSTRUCTION
FIRE RATED GR2 CYLINDRICAL LOCK
4. INSTALL ROSE AND LEVER
· Install rose ensure indents on side of rose align with slots in rose support.
· Install lever by pushing on to spindle until clip engages with lever.
· Verify proper operation of lock.
4. INSTALL STRIKE
Install strike onto frame using provided combo screws.
RE-HANDING INSTRUCTION
For Memphis Lever Only 126/176 Functions
Locks with handed levers are shipped RH
· Swap inside and outside levers. · Use included pick to depress lever clip
through hole in front of lever to remove.
OUTSIDE TRIM
LH/LHR
RH/RHR
SF10302 Rev1 7/27/22
Home Page | PDQ
