LIVB0012-E Series Devo Pro II Led
Product Information
Product Name: GB D Series Devo Pro II Led
Dimensions: 150 mm x 5.98 mm x 5.58 mm
Installation: The installation should be
carried out by an electrician or by any similarly qualified
person.
Preventing Damages: Prevent from damages
through electrostatic discharges and from mechanical impacts. A
discharge of static electricity may damage sensitive components.
Always be properly grounded when touching leads or circuitry inside
the luminaire. Use a wrist strap connected by a ground cord to the
reflector. Avoid touching light source (LEDs) with bare hands. This
may cause significant loss of brightness.
Cable Installation Options: There are two cable
installation options available.
Luminaire Materials: Agressive chemicals, in
direct contact with the luminaire or in the form of airborne
substances, can damage the fitting. So can unsuitable cleaning
agents. Do not use any alkaline or acidic solution nor any
solvents. Do not use any cleansing agents that are aggressive on
plastics.
DIP Switch Settings:
| Product Name | Current (mA) | Power (W) | Flux (lm) |
|---|---|---|---|
| LIVB0012-E | 200 | 23 | 3000 |
| LIVB0013-E | 200 | 30 | 4400 |
| LIVB0014-E | 200 | 35 | 4800 |
| LIVB0015-E | 200 | 44 | 6000 |
Product Usage Instructions
- Cable Installation:
- Option 1: Follow the instructions under Option 1 in the
manual. - Option 2: Follow the instructions under Option 2 in the
manual. - Option 3: Follow the instructions under Option 3 in the manual.
(Separately available)
- Ensure that you are properly grounded when touching leads or
circuitry inside the luminaire. - Use a wrist strap connected by a ground cord to the
reflector. - Avoid touching the light source (LEDs) with bare hands as this
may cause significant loss of brightness.
- Refer to the DIP Switch Settings table above to determine the
appropriate settings for your desired current, power, and
flux.
- Avoid using aggressive chemicals, alkaline or acidic solutions,
solvents, or cleansing agents that are aggressive on plastics for
cleaning the luminaire.
- The light source contained in this luminaire should only be
replaced by the manufacturer, his service agent, or a similarly
qualified person. - Disconnect the power supply before opening the luminaire.
For more information and detailed instructions, please refer to
the user manual provided by Schrack Technik GmbH.
GB D
Series Devo Pro II Led
5.98
150 mm
5.58
150 mm
5.8
150 mm
5.8
150 mm
3.63
150 mm
GB The installation should be carried out by an electrician or by any similarly qualified person.
D Die Installation sollte durch einen Elektriker oder eine im Elektrobereich geschulte Person durchgeführt werden.
102
A
B
LIVB0012 1174 700±76 LIVB0013 1454 1000±76
LIVB0014 1174 700±76 LIVB0015 1454 1000±76
C
470±76 450±76 470±76 450±76
B
C
A
GB Prevent from damages through electrostatic discharges and from mechanical impacts.
A discharge of static electricity may damage sensitive components. Always be properly grounded when touching leads or circuitry inside the luminaire. Use a wrist strap connected by a ground cord to the reflector. Avoid touching light source (LEDs) with bare hands.This may cause significant loss of brightness.
D Vermeiden von Schäden durch elektrostatische Entladungen und von mechanischen Wirkungen.
Die Entladung von statischer Elektrizität kann die empfindlichen Bauteile beschädigen. Erden Sie sich immer, bevor Sie Bauteile oder Leitungen der Leuchte berühren. Verwenden Sie ein Antistatikarmband, das über ein Erdungskabel an dem Reflektor angeschlossen ist. Berühren Sie niemals die Leuchtmittel (LEDs), dies kann zu erheblichen Lichtverlust führen.
1 GB Cable installation options D Kabel installations optionen
2x
2x
2
2.1
G
B
A A
B A
C
D
E
GB Only for B – E D Nur bei B – E
2.2 E
C
D
GB Option 1
2.3
D Option 1
E
PH1
2.4
Ø20 Ø20
GB Option 2 D Option 2
1x 1x 1x
1
E
2
3
GB Only for B – E D Nur bei B – E
4
6
5
~150mm
7
2020.11.23
3 3.1
3.2
4
4.1
DIN7985 A M6
3.3
DIN7996 Ø6
B
4ft LED-8x 5ft LED-10x
4.2
Click!
Click!
5
5.1
5.3
12+1mm 1,5-2,5mm2 8+1mm 0,5-1,0mm2
5.2
35 mm
5.4
Click!
Click!
GB Option 3 D Option 3
1
2
GB Separately available D Separat bestellbar
Click!
B
DIN7985 A M6 DIN7996 Ø6
Click!
4x DIN912 M4X50 4x DIN562 M4
GB
Luminaire materials Agressive chemicals, in direct contact with the luminaire or in the form of airborne substances
can damage the fitting. So can unsuitable cleaning agents. Do not use any alkaline or acidic solution
nor any solvents. Do not use any cleansing agents that are aggressive on plastics.
D
Materialhinweis Chemische Einflüsse durch Kontakt oder durch in der Atmosphäre schwebende Stoffe
und ungeeignete Reinigungsmethoden können zu einer Beschädigung der Leuchte führen!
Verwenden Sie keine laugen-und säurehaltigen Stoffe und keine Lösungsmittel
oder Reinigungsmittel,welche Kunststoffe angreifen.
LIVB0012-E – DIP Switch
Current Power Flux (PMMA) 1 2 [mA] [W] [lm]
Off Off 200 23 Off On 250 27 On Off 300 32 On On 350 37
3000 3700 4500 5200
LIVB0013-E – DIP Switch
Current Power Flux (PMMA) 1 2 [mA] [W] [lm]
Off Off 200 30
Off On 250 37 On Off 300 44
On On 350 51
4400 5400 6300 7000
LIVB0014-E DIP Switch
Current Power Flux (PMMA) 1 2 [mA] [W] [lm]
Off Off 200 35 Off On 250 44 On Off 300 52 On On 350 61
4800 6000 7200 8300
LIVB0015-E DIP Switch
Current Power Flux (PMMA) 1 2 [mA] [W] [lm]
Off Off 200 44
Off On 250 55 On Off 300 66
On On 350 77
6000 7500 9000 10400
CAUTION, RISK OF ELECTRIC SHOCK! Disconnect supply before opening! The light source contained in this luminaire shall only be replaced by the
manufacturer or his service agent or similar qualified person.
VORSICHT, STROM SCHLAGGEFAHR! Vor dem Öffnen schalten Sie das Netzteil aus! Die Lichtquelle dieser Leuchte darf nur vom Hersteller oder einem von ihm beauftragten Servicetechniker oder einer vergleichbar qualifizierten Person ersetzt werden
Schrack Technik GmbH Seybelgasse 13 AT-1230 Wien
www.schrack.com
2020.11.23
Schrack Technik International: International
