Easy Home Cm5078 Adhesive Electrodes-eu User Manual (+ PDF)

easy home CM5078 Adhesive Electrodes-EU User Manual

Adhesive Electrodes
for transcutaneous Electrical Nerve Stimulator, Electrical Muscle Stimulator, Interferential Apparatu

Contents hide

Clean skin thoroughly prior to each application of electrodes. Electrodes do not stick well if any lotion, oil, make-up, dirt, etc, is left on skin.
For model CM5050, insert the pins of the lead wire from the device into the electrode wire connectors. For model CM5078, push the snap connector of the electrode device onto the snap bution on the electrode gel pad.
Remove the electrodes from the protective liner and apply firmly to the skin. Adhesion improves when electrodes reach skin temperature.
Helpful hint: Always moisten the skin with a damp towel prior to applying the electrodes. ‘This will improve the electrode adhesion and service life.

Between uses, store the electrodes in the PE bag in a cool, dry place.
The life of the electrodes varies depending on skin conditions, storage, times of use, type of stimulation, and applied parts. Electrode life may be extended by carefully following the application instruction above.

The electrodes are intended for single person use only.
Do not apply to broken skin. Should skin rash occurs discontinue use and contact your physician. Do not stimulate while driving a motorized vehicle, or operating machinery.
Do not exceed 0.1 watls/cm.
Storage: After using the electrodes, please stick them onto the plastic holder and store them in the ziplock bag provided

Symbol	Definition	Symbol	Definition
	CE marking		Keep away from sunlight
	Batch code		Temperature: 10°C-40°C
	Date of manufacture		Humidity: 20%-80%
	Expiry date		Latex Free
	Manufacturer		Caution
	Authorized Representative in the European Community		Consult instructions
	Recyclable