Tribit Ic-bts25 Portable Wireless Speakers User Manual

Tribit Ic-bts25 Portable Wireless Speakers User Manual

Tribit IC-BTS25 Portable Wireless Speakers logo

Tribit IC-BTS25 Portable Wireless Speakers

Tribit IC-BTS25 Portable Wireless Speakers product

Safety Precautions

  • Avoid dropping the speaker on the floor.
  • Do not try to disassemble or repair the speaker unless you are a technician.
  • Do not submerge the speaker in water.
  • Never expose the speaker to extreme high or low temperatures.
  • Stop use immediately if thunderstorm happens.
  • Do not clean its surface with any corrosive cleanser or other chemical solutions.

Specifications

  • Bluetooth version: V4.2
  • Bluetooth profile: A2DP, AVRCP, HFP, HSP
  • Driver: 2 x <l>45mm Passive radiator
  • Output power: 2 x 12W
  • Signal-to-noise ratio • 80d8
  • Frequency response: 80-20KHz
  • Battery: 7.4V / 2200mAh
  • Music play time: Up to 20 hours I varies by volume level and music files)
  • Charging time: 4 hours@SV/1.SA
  • Dimensions: 65xl98x68 mm/ 2.56×7.79×2.68 in
  • Weight: 595g / 20.98oz

What’s in the Box Tribit IC-BTS25 Portable Wireless Speakers fig 1

Overview Buttons & IndicatorsTribit IC-BTS25 Portable Wireless Speakers fig 2Tribit IC-BTS25 Portable Wireless Speakers fig 3

Connections Tribit IC-BTS25 Portable Wireless Speakers fig 4

Bluetooth Pairing Tribit IC-BTS25 Portable Wireless Speakers fig 5

Buttons

FunctionButtonOperation
 

Power ON/OFF

 

Power Button

Press the button to turn on / off the speaker
 

Pair a Bluetooth Device

 

Bluetooth Button

Press the button to manually enter pairing mode
 

Volume Up

 

Volume+

Press the button to increase the volume level
 

Volume Down

 

Volume-

Press the button to decrease the volume level
Play/pause 

MFB

Press once the

button

 

Next track

 

MFB

Double press the button
 

Previous track

 

MFB

Press the button

for3times

Answer/end the incoming call 

MFB

Press once the button
Reject an incoming call 

MFB

Press and hold the button for 2s
 

 

Voice dial function

 

 

MFB

Press and hold the button for 2s to activate ( your device

must support this function)

 

XBASS

 

XBASS

Press the button to switch Bass and normal mode

Indicators

indicatorStatus
 

Power indicator

 

Blue indicator I Reconnection flashes slowly                                made

 

 

 

 

 

 

 

 

Power indicator

Blue indicator flashes quicklyBluetooth pairing mode
Blue indicator keeps sturdily on 

Connected

 

 

Red light is always on

Charging/ battery <15% battery<2% prompts automatic shutdown
 

Green light is always a

 

Battery full

 

Power display

 

Mobile phone display

 

XBASS indicator

 

White indicator lights up

 

Bass mode is activated

Reset

If this speaker has any problem, you can try to press and hold Volume + and Volume – buttons simultaneously for Ss to reset this speaker and remove the old pairing in your Bluetooth device, and then pair again.

Customer Service

FCC Statement

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment hos been tested and found to comply with the limits for a Closs B digital device, pursuant to Port 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which con be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into on outlet on a circuit different from that to which the receiver is connected
  • Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals