72380 Connect Case Mini 6 Smart Tablet
Product Information
The IPORT CONNECT platform offers a revolutionary new system for
your iPad. With multiple case options available, including the
CONNECT Case Mini 6, CONNECT Case Pro 11 – Air, CONNECT Case Pro
12.9, CONNECT Case 10.2, and CONNECT Case 10.9, you can find the
perfect fit for your iPad.
Included in the box:
- 1 IPORT CONNECT Case
- 1 IPORT Security tool – 1.5mm hex key
- 1 Info Card
- 1 Fit Pad Installation card and Pads* (only included in 12.9
Cases)
Product Usage Instructions
- Remove the CONNECT Case from the box and place it on a
table. - Remove the short Case Top.
- Slide your iPad into the Case, ensuring that the lighting cable
is securely inserted into the iPad. - Reinstall the Case top onto the lower half of the Case and
iPad. - Use the provided IPORT tool to insert it into the top of the
Case and slide the tool towards the lock position icon. - Place the IPORT CONNECT Case onto a Dock or MultiDock to
initiate charging.
Hand Strap Installation (sold separately)
- Insert the metal strap loops with the flat end pointing towards
the left or right side of the case. - Rotate the strap clip towards the bottom of the Case and insert
it into the hole until the strap clip snaps into place. - Repeat the above steps for the second strap clip.
- Insert the IPORT CONNECT Hand Strap under both strap loops with
the Velcro facing out from the case. Fold over the Hand Strap and
attach it to the Velcro. Adjust the hand strap to a snug but
comfortable fit around the top of your hand.
Hand Strap Removal
- Unlock the CONNECT Case Top from the Case Bottom (see step 5 of
installing the Case). - Remove the Case Top from the Case Bottom.
- On the inside of the Case Top, locate the small oval hole and
insert the IPORT CONNECT Security tool. Pivot the IPORT Security
tool toward the top of the Case Top to free the Strap loop. Rotate
the Strap loop 90 degrees left or right to remove it from the Case
Top. - Repeat the above step for the second strap loop.
CASE
CONNECT
72380 – CONNECT CASE MINI 6 72381 – CONNECT CASE PRO 11 – Air 72382 – CONNECT CASE PRO 12.9 72383 – CONNECT CASE 10.2 72396 – CONNECT CASE 10.9
1
CONNECT
CASE
IPORT CONNECT Case Install Manual
Thank you for purchasing the all new IPORT CONNECT Platform. We hope you enjoy this revolutionary new system and if at any time you need more assistance please contact IPORT Tech Support via Online chat or through our help desk.
– IPORT Team
Whats in box:
1 – IPORT CONNECT Case 1 – IPORT Security tool – 1.5mm hex key 1 – Info Card 1- Fit Pad Installation card and Pads*
Glossary of Terms:
· Case – The fully assembled CONNECT Case Top and Bottom.
· Case Top – The short removable portion of the chase including the locking portion of the Case.
· IPORT Security Tool – The orange handled 1.5mm hex tool used for locking and unlocking IPORT Products.
· Station Interface Module – The main electronics portion of the new IPORT CONNECT PRO Platform consisting of the round electronic components found only on PRO Cases.
· Dock Interface Module – The secondary linear electronics found on the IPORT CONNECT
* included only in 12.9″ Cases 2
CONNECT
CASE
1. Remove Case from the box and place on a table.
2. Remove the short Case Top.
3
CONNECT
CASE
3. Slide iPad into the Case making sure the lighting cable is snugly inserted into the iPad.
4
CONNECT
CASE
4. Reinstall the Case top onto the lower half if the Case and iPad.
5
CONNECT
CASE
5. Use the provided IPORT tool, insert the tool into the top of the case and slide the tool towards the lock position icon.
6
CONNECT
CASE
· For added security rotate the IPORT tool clockwise to tighten the setscrew in place holding the lock secure.
7
CONNECT
CASE
6. Place the IPORT CONNECT Case onto a Dock or MultiDock to initiate charging.
8
CONNECT
CASE
Hand Strap Install – (sold separate) 1. Insert the metal strap loops with the
flat end pointing towards the left or right side of the case.
9
CONNECT
CASE
2. Rotate the strap clip towards the bottom of the Case and insert into the hole until the strap clip snaps into place.
10
CONNECT
CASE
3. Repeat for the second clip. X 2
4. Insert the IPORT CONNECT Hand Strap under both strap loops with the Velcro facing out from the case, fold over the Hand Strap and attach to the Velcro. Adjust hand strap to a snug but comfortable fit around the top of your hand.
· NOTE Case Top and Bottom MUST be locked together to properly secure the iPad and CONNECT Case together.
11
CONNECT
CASE
Hand Strap Removal 1. Unlock the CONNECT Case Top
from the Case Bottom. See step 5 of installing the Case. 2. Remove the Case Top from the Case
Bottom.
12
CONNECT
CASE
3. On the inside of the Case Top, locate the small oval hole and insert the IPORT CONNECT Security tool. Pivot the IPORT Security tool toward the top of the Case Top freeing the Strap loop. Rotate the Strap loop 90 degrees left or right to remove the Strap Loop from the Case Top.
4. Repeat for the second strap loop.
13
