Allied Battery 51105-5303 51.2v 105ah Lithium Iron Phosphate Battery User Guide

51105-5303 51.2V 105Ah Lithium Iron Phosphate Battery

Product Information:

  • Product: 12V DC-DC Converter
  • Wire Colors and Gauges:
    • – ORANGE: 16AWG
    • – YELLOW: 16AWG
    • – RED: 16AWG
    • – BLACK: 16AWG
  • Components:
    • – Cart Accessories
    • – B Motor Controller
    • – Solenoid
    • – Battery Charger
  • Battery Type: Commercial Lithium

Product Usage Instructions:

  1. Begin by connecting the ORANGE wire to the switched B+ power
    source, unless you require constant power for upgraded
    accessories.
  2. Ensure that the cable rings have solid flush contact with the
    battery terminal.
  3. Attach the largest diameter (high current) cables to the
    battery terminals first to minimize resistance.
  4. Refer to the user manual or consult a professional for specific
    application, service, or installation details as they may vary from
    case to case.
  5. Always handle the battery with caution and follow safety
    precautions, including avoiding sources of static electricity.
  6. Keep chargers off while working on batteries and never attempt
    to open the battery.
  7. Avoid actions that can damage the battery, such as puncturing,
    dropping, crushing, burning, penetrating, shaking, hammering, or
    misconnecting terminals.
  8. If you have any questions or need assistance with the battery
    installation or usage, contact Allied’s technical support engineers
    through the provided phone numbers or website.

QUICKSTART GUIDE

Connect the ORANGE wire to the switched B+ power source UNLESS you need constant power for upgraded accessories.

12V DC-DC CONVERTER

ORANGE
16AWG
YELLOW 16AWG

RED 16AWG
BLACK 16AWG

CART ACCESSORIES

– NEGATIVE

B+
B MOTOR CONTROLLER

SOLENOID

BATTERY CHARGER

+ POSITIVE

COMMERCIAL LITHIUM

WE ARE HERE TO HELP
If you have any questions concerning safety precautions or for any assistance in installing or using the battery in your system, contact Allied’s technical support engineers at one of the following numbers, or send us an email through our website at alliedlithium.com/pages/contact-us-1
TECHNICAL INFORMATION
Information provided by Allied Battery including technical documents, diagrams, videos, and information provided by representatives are for reference only. Actual details of each application may vary, please consult a professional for each specific application, service or installation.

BEGIN SAFE TO END SAFE

· Always wear proper personal protective equipment (PPE).

· Never wear jewelry or other metal objects when working on or around batteries.

· Always use insulated tools when working on batteries.

· Never place objects on top of batteries.

· Always check connections for proper torque.

· Proper connections should be checked regularly to ensure a tight connection.

· Never charge a battery when the temperature is below 32°F or above 131°F.

· Always keep sparks and flames away from batteries.

(including sources of static electricity)

· Never store batteries below 30% State of Charge.

· Always use Allied lithium charger

· ·

Always make sure chargers are off Never attempt to open the battery

ocarsdei.sconnected-while

working

on

batteries.

· Always install in a parallel set up.

· Do not immerge in battery in water.

· Never physically damage the battery

(this includes, without limitation): Puncturing, dropping, crushing, burning,

penetrating, shaking, hammering, and misconnecting terminals.

· Never over-charge or over-discharge the battery.

· Never attempt to connect batteries in series.

· Do not connect the battery terminals with reverse polarity.

INSTALLING ALLIED BATTERIES
Use hand tools only and ensure the cable rings have solid flush contact with the battery terminal; largest diameter (high current) cables attach to battery terminals first for lowest resistance.

Take a photo of the battery wiring in the cart before removal. Take note of the wires attached to system positive and system negative. Lead-Acid batteries are wired in Series, Allied batteries are wired in Parallel. Common cart voltages include 36V (38.4V) / 48V (51.2V) / 72V (76.8V) Please confirm all Allied batteries are the same voltage and match your motor/controller system voltage. Remove Lead-Acid Batteries and install Allied batteries. Parallel Batteries make common connections only. Positive (red) only connects to positive, Negative (black) only connects to negative. Parallel Batteries must match cart controller voltage (24V/36V/48V/72V) Do not connect parallel batteries in series to protect from high voltages which will destroy electronics, and can cause personal injury. Parallel connections increase Amp-hour capacity (3x 30Ah = 90Ah; 5x 36Ah = 180Ah).

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals