833 Hosts BLE Circuitry Temperature Sensor
Instructions
Constructed using industrial plastics. TempSense 833 hosts.
BLE circuitry, Temperature Sensors, and batteries.
The batteries survive the sensor for 5 years.
Detailed Specification
| Item Name | Description | specifications |
| Physical | Material | ABS |
| Dimension | 70mm (L) by 28mm (W) by 08mm (H) | |
| Battery | Battery Cells | 02 |
| Battery Capacity I Cell | 354mAh | |
| Battery Voltage | 3V | |
| Battery Chemistry | LiMN02 | |
| Battery Storage Temperature | Room Temperature | |
| Temperature Sensor | Type | Digital |
| As Tracy |
| |
| TempSense 810 | Operating Temperature | -40 ° C to +as° C |
| Grading | Medical Grade ASTM El112 and 15080601 -2-S6 | |
| Certification | NIST Traceable. 150/IEC 1702S |
Construction
QR code that uniquely identifies the TempSense 833. The QR code is used for pairing the TempSense833 with the GT Mini.
Dual batteries with the chemistry of LiMNO4 survive a vast temperature range of -40°C to +125°C.
Stainless steel-based sensing tip that can measure the air temperature or touch-based temperature.
Constructed using industrial plastics, TempSense 833 hosts, and BLE circuitry. Temperature Sensor and the batteries. The batteries survive the sensor for 5 years.
FCC Warning Statement: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, includinginterference that may cause undesired operation.
FCC Radiation Exposure Statement
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
