Helena Table Lamp

Helena Table Lamp
How to Install Your New Light Please check that you received all of the components pictured in this guide. Reach out to us if anything is missing. It’s very rare, but it happens. Don’t forget to turn off the electrical power source.
You won’t need any additional tools.
CAUTION As a safety feature, this lamp has a polarized plug to reduce the risk of electric shock. This means it has two flat prongs and a third circular prong underneath, and it will fit in an outlet one way only. If the plug does not fit fully and easily into the outlet, do not force it; contact a qualified electrician.
ATTENTION Par mesure de sécurité, cette lampe a une fiche polarisée pour réduire le risque de choc électrique. Cela signifie qu’il a deux broches plates et une troisième broche circulaire en dessous, et qu’il ne s’insère dans une prise que dans un seul sens. Si la fiche ne s’insère pas complètement et facilement dans la prise, ne la forcez pas; contactez un électricien qualifié.

Contents

Part A Power Cord

Part B Bulb (x5)

Part C Set Screws (x2)

Part D Hex Key

Part E Helena Table Shade

Part F Helena Table Base

Assembly Guide

1 of 3

incommonwith.com

Helena Table Lamp

Step 1: Feed the cord from the shade (E) through the floor lamp base (F) Align the shade with the base connector.

Step 2: Insert set screws (C) using hex key provided (D).

E F

C D

Step 3: Gently screw in the included lightbulbs (B) into the fixture sockets of the lamp shade.

Step 4: Carefully tilt the table lamp to it’s side. Connect the wire from the shade to the power cord. Twist to secure. Once connected, gently tilt the lamp and slide the quick connect under the base of the lamp.

B A

Assembly Guide

2 of 3

incommonwith.com

Step 5: Plug-in the table lamp.
C A
D

Helena Table Lamp
Step 6: Spin the finial on the top of the Helena table shade (E) to turn on the fixture and control brightness.

Assembly Guide

3 of 3

incommonwith.com

References

• In Common With