SSL-12691 One Light Matte Black Modern Outdoor Wall Lantern with Clear Seeded Glass
Product Information
The product is a light fixture that requires assembly and
installation. The package includes a fixture, a mounting unit,
rubber rings, screws, mounting screws, wire nuts and other hardware
required for installation. The product requires tools such as a
ladder, safety glasses, electrical Phillips screwdriver, flat blade
screwdriver, pliers and wire strippers for installation.
Tools required:
- Ladder
- Safety glasses
- Electrical Phillips screwdriver
- Flat blade screwdriver
- Pliers
- Wire strippers
Hardware included:
- Fixture
- Mounting Unit
- Rubber Rings
- Screws
- Mounting Screws
- Wire Nuts
Exploded parts:
- Wire Nuts
Product Usage Instructions
Step 1:
Unscrew the mounting unit, rubber rings and screws from the
fixture.
Step 2:
Use the mounting screws to attach the mounting unit to the
junction box (not included).
Step 3:
Make the electrical connection from the junction box to the
fixture. Connect the ground wire to the mounting unit using the
preinstalled green ground screw. Then connect the positive,
negative and ground wires with the supplied wire nuts. Secure with
electrical tape.
Wires to be connected:
- Black or Red wire (hot) from the junction box
- White wire (neutral) from the junction box
- Bare or Green ground wire from the junction box
- Black wire from the fixture
- White wire from the fixture
- Ground wire from the fixture
Step 4:
Attach the fixture to the mounting unit through screw holes as
shown, and secure it with screws and rubber rings. Please use caulk
in the back plate and wall mounting surface to prevent water from
entering.
Step 5:
Install bulb (not included).
ASSEMBLY INSTRUCTIONS
CAUTION
³Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
TOOLS REQUIRED
³Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by
removing the fuse at the fuse box.
Ladder
Safety glasses
Electrical Phillips
tape
screwdriver
Flat blade screwdriver
Pliers
Wire strippers
HARDWARE INCLUDED
Fixture
Mounting Unit
Rubber Rings
Screws
Mounting Screws
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
Wire Nuts
EXPLODED PARTS
Wire Nuts
INSTALLATION
STEP 1
Unscrew the mounting unit, rubber rings and screws from the fixture.
Mounting Unit
Mounting Screws Screws
Rubber Rings
Bulbs (not included)
STEP 2
Use the mounting screws to attach the mounting unit to the junction box(not included).
ASSEMBLY INSTRUCTIONS INSTALLATION
STEP 3
Make the electrical connection from the junction box to the fixture. Connect the ground wire to the mounting unit using the preinstalled green ground screw. Then, connect the positive, negative and ground wires with the supplied wire nuts. Secure with electrical tape.
Black or Red wire (hot) from the junction box
White wire (neutral) from the junction box
Bare or Green ground wire from the junction box
*Sealing tape (not included)
Black wire from the fixture
White wire from the fixture
Ground wire from the Fixture
*Green Ground Screw
STEP 4
Attach the fixture to the mounting unit through screw holes as shown, and secure it with screws and rubber rings.
NOTICE: Please use caulk in the back plate and wall mounting surface to prevent water from entering.
STEP 5
Install bulb (not included)
