Psi Woodworking Products Lsand1012 Lathe Mounted Disc Sander Instruction Manual

LSAND1012 Lathe Mounted Disc Sander

Product Information:

Product Name: PSI Woodworking Products Lathe Mounted Disc
Sander

Model Number: LSAND1012

Manufacturer: PSI Woodworking Products

Country of Origin: China

Product Usage Instructions:

1. Ensure that the work area is clean and free from clutter to
   prevent accidents.
2. Avoid using the disc sander in a dangerous environment and make
   sure the area is well lit.
3. Do not use the tool in damp or wet locations or expose it to
   rain.
4. Keep children away from the sander and ensure that the workshop
   is childproof.
5. Maintain the tool by keeping all parts clean for optimal
   performance and safety.
6. Avoid sanding with excessive pressure to prevent motor
   burnout.
7. Wear proper apparel, including non-slip footwear, and avoid
   wearing loose clothing, ties, rings, or other jewelry that can get
   caught in spinning parts. Tie back or cover long hair.
8. Use safety goggles or a face shield specifically designed for
   safety purposes. Everyday glasses are not suitable for
   protection.
9. Wear a dust mask while using the sander to avoid inhaling fine
   airborne dust particles.
10. Follow the assembly instructions below to set up the lathe
    mounted disc sander:

Assembly Instructions:

1. Loosen the height adjustment bolts (5) and slide off the
   removable height adjustment risers (4) across the lathe ways. Do
   not completely tighten them.
2. Attach the bed (9) to the lathe using the bed attachment bar
   (10) and secure it with the bed attachment handle (10).
3. Adjust the height of the sander frame (8) using the height
   adjustment bolts (5) and risers (4) until it is at the desired
   level. Tighten the bolts.
4. Position the table tilt adjustment (6) until the bed is square
   to the sanding disc. Tighten securely.
5. For pen squaring, use the PSI squaring jig #PKSQUARE for best
   results.

Note: Refer to Figure A and Figure B in the user manual for
visual representations of the safety rules and lathe
components.

#LSAND1012

PSI Woodworking Products

Lathe Mounted Disc Sander
This Lathe attachment is uniquely designed to provide sanding functionality to many brands of 10″ and 12″ swing Lathes. Use it for virtually any sanding application. The tool features:

Figure A
90º

· Variable speed (available from your lathe) · Tilt table from -45º down to 10º up · Included, adjustable T-slot miter gauge · Easy to Mount and unmount from Lathe · Heavy Duty Aluminum bed · Adjusts for 10″ and 12″ swing lathes · Dust Port

General & Specific Safety Rules:

1. Keep work area clean – Cluttered areas and benches invite accidents.

2. Do not use in a dangerous environment – Keep area well lit. Do not

use tools in a damp or wet locations or expose them to rain.

3. Keep children away and make sure shop is child proof – All visitors

should be kept a safe distance spinning disc.

4. Maintain Tools – For the best and safest performance, keep all parts

clean.

5. Do not sand with excessive pressure – It will do a better and safer

job and avoid motor burnout.

6. Wear Proper Apparel – Do not wear loose clothing. ties, rings, or

other jewelry that can get caught in spinning parts. Wear non-slip foot-

wear. Tie back or cover long hair. 7. Use safety goggles or a face shield – Everyday glasses are NOT safety

Figure B

glasses.

8. Use a dust mask – Since sander creates fine airbourne dust particles.

2 – Sandpaper Disc

Lathe Components (Fig B)
1. 5″ x 12″ Slotted Aluminum bed

1 – Alluminum Bed

3 – Lathe Sanding Disc Attachment

2. 9″ PSA Sandpaper disc ­ 100grit

3. 9″ Alluminum Sanding disc attachment

4. Height adjustment Risers(2ea) 5. Height adjustment connection bolt (2ea) 6. Table tilt adjustment 7. 1-1/2″ Dust port

11 – Mitre Gauge

4 – Removable Height Adjustment Riser

8. Sander Frame

9. Bed attachment bar

10. Bed attachment handle 11. Mitre Gauge

10 – Lathe Attachment Handle

6 – Table Tilt

Assembly

Adjustment

· Thread sanding disc attachment (3) on to 1″ x 8tpi headstock

spindle.

· To adjust from 12″ (default delivery) to 10″ swing lathes:
loosen the height adjustment bolts (5), slide off the risers (4) 9 – Bed Attachment
and re-attach. · Position the sanding assembly on lathe bed as shown in Fig A.

5 – Height Adjustment Bolts

· Attach frame to lathe bed by dropping Lathe attachment knob (10) through the frame and lathe ways secure by threading into the Bed attachment bar (9) positioned under an

8 – Sander Frame 7 – Dust Port

accross the lathe ways. Do not completely tighten.

· Adjust the table square to the Sanding Disc (3), then tighten

the Attachment knob (10) to secure.

· To vertically align to the disc, Use a square on the Sanding

bed and position the tilt adjustment (6) until the bed is square

to the disc. Tighten.

Pen Squaring
use PSI squaring jig #PKSQUARE for best results.

2022 PSI Woodworking · Philadelphia PA 19115 – V06/22

Made in China