Intermatic Wp3100c Weatherproof In-use Cover Installation Guide (+ PDF)

Contents hide

WP3100C Weatherproof In-Use Cover

Product Information

The WP3100C is a weatherproof enclosure designed for single gang
applications. It meets the 2005 NEC 406.8 (B) code and is suitable
for 15 and 20 Amps, 125 and 250V receptacles installed in wet
locations. The enclosure has a depth of 69.85 mm and comes with one
cover that can be configured in multiple ways. It is NEMA 3R rated
and features an insert design protected by US Patent #5 280 135 and
Canadian Patent #2 073 932.

Dimensions: 34.925 mm, 41.275 mm, 44.45 mm, 53.975 mm
Configurations: Duplex, GFCI

Product Usage Instructions

For new construction, install the WP3100C device in an approved
junction box according to the device manufacturer’s
instructions.
Configure the WP3100 base by removing the cord set ports as
shown in the diagram (1).
Select the appropriate device insert. If needed, modify the
toggle/single receptacle insert to fit your device (2).
Snap the insert into the base.
Secure the base onto the device or junction box using the
provided device screws or box screws (3).
Snap the cover portion onto the hinges. The cover must always
hinge on top (3).

Please refer to the official user manual for more detailed
instructions and safety information.

View Fullscreen

CUBIERTA DE PROFUNDIDAD ESTÁNDAR 69.85 mm COUVERCLE DE PROFONDEUR RÉGULIÈRE 69,85 mm
WWW.INTERMATIC.COM
23/4″ DEPTH
PROFUNDIDAD 69.85 mm PROFONDEUR 69,85 mm

WP3100C

In-Use Weatherproof Receptacle Cover · Mounts Vertically or Horizontally w/Hidden Hinges · Includes three patented rotating inserts · GFCI · Duplex · Toggle/4 rounds 1 3/8″, 1 5/8″, 1 3/4″, 2 1/8″
Protection for Single Gang Applications
Meets 2005 NEC 406.8 (B) code
“15 and 20 Amps, 125 and 250V receptacles installed in wet locations shall have an enclosure that is weatherproof whether or not the attachment plug cap is inserted”

Cubierta protectora de receptáculo
contra la intemperie en uso
· Se instala en forma vertical u horizontal con bisagras invisibles
· Incluye tres piezas giratorias patentadas · GFCI (interruptor de circuito de falla a tierra) · Doble · Para interruptor de palanca/4 interruptores redondos
34.925 mm, 41.275 mm, 44.45 mm, 53.975 mm

Couvercle étanche pour prise active

· Montage vertical ou horizontal avec charnières invisibles
· Comprend trois garnitures isolantes tournantes

brevetées

· Disjoncteur de fuite de terre

Configurations, One Cover

· Duplexe

Configuraciones, una cubierta

· Bascule/4 à 34,925 mm, 41.275 mm,

Configurations, un couvercle

44,45 mm ou 53,975 mm de diamètre

156–00167

NEMA 3R
Insert Design US Patent #5 280 135
Canadian Patent #2 073 932

Duplex

GFCI

1-3/8″, 1-5/8″,

1-3/4″, 2-1/8″

Toggle

(1)
(2)
Vertical (3)
Horizontal

Installation Instructions for WP3100C 1. For new construction, install device in approved junction box
per device manufacturers instructions. 2. Configure WP3100 base by removing cord set ports as per
diagram. (1) 3. Select proper device insert. If necessary, modify toggle/single
receptacle insert for appropriate device. (2) 4. Snap insert into base. 5. Secure base onto device or junction box using device screws or
box screws provided (3) 6. Snap cover portion onto appropriate hinges. Cover must
always hinge on top. (3)
Instrucciones de instalación para WP3100C 1. Para una nueva construcción, instale el dispositivo en una caja
de empalme aprobada de acuerdo con las instrucciones del fabricante del dispositivo. 2. Configure la base WP3100 mediante la remoción de los puertos del cordón eléctrico como lo indica el diagrama. (1) 3. Seleccione la pieza del dispositivo adecuada. Si es necesario, cambie la pieza del receptáculo ya sea para interruptor simple o de palanca para el dispositivo adecuado. (2) 4. Encaje la pieza a la base. 5. Asegure la base al dispositivo o caja de empalme usando los tornillos del dispositivo o los tornillos de la caja incluidos. (3) 6. Encaje la cubierta en las bisagras adecuadas. La cubierta siempre debe ir ajustada arriba. (3)
Directives d’installation pour WP3100C 1. En cas de nouvelle construction, installer le dispositif dans une
boîte de connexion approuvée selon les directives du fabricant du dispositif. 2. Configurer la base WP3100 en retirant les ports de cordon tel qu’illustré sur le diagramme. (1) 3. Choisir la garniture isolante appropriée au dispositif. Si nécessaire, modifier le bouton ou la garniture isolante de prise simple en fonction du dispositif. (2) 4. Engager la garniture isolante dans la base. 5. Fixer la base au dispositif ou à la boîte de connexion à l’aide des vis du dispositif ou de celles fournies avec la boîte. (3) 6. Remettre le couvercle sur les charnières appropriées. Le couvercle doit toujours pendre sur le dessus. (3)