TOB5645-1 Junio 1-Light Pendant
Product Information:
The Junio 1-Light Pendant (Item # TOB5645-1) is a light fixture
that requires assembly and installation. It is designed to be
mounted on a junction box and comes with a mounting plate, canopy,
metal plate, collar rings, fixture body, glass shade, thumbscrews,
and wire nut.
It is important to note that the light fixture should be
installed in accordance with all applicable local installation
codes and by a person familiar with its construction and operation,
as well as the hazards involved. Before installation, carefully
inspect the item and its contents. If any damage or defect is
found, do not install. Retain all packaging material until
installation is complete and approved.
The product does not include bulbs. Please ensure you have the
appropriate bulbs before proceeding with the installation.
Product Usage Instructions:
- Carefully remove all parts from the box and place them on a
clean, soft surface. - Remove the mounting plate (A) from the canopy (G) by removing
screws (F). - Remove the metal plate (D) from the mounting plate (A) by
removing collar rings (E). - Install the mounting plate (A) to the junction box and secure
it with mounting screws (C). - Feed the fixture wires through collar rings (E) and metal plate
(D). - Connect the fixture hot wire (black) to the supply hot wire
(usually black) using the wire nut (L). Make sure not to reverse
the hot and neutral connections. - Install the metal plate (D) to the mounting plate (A) and
secure it with the collar ring (E). - Install the canopy (G) to the mounting plate (A) and secure it
with screws (F). - Install the light bulb into the socket.
- Install the glass shade (K) to the fixture body (I) and secure
it with thumbscrews (J). Make sure to thread the thumbscrews (J)
evenly to ensure proper glass securing. Avoid overtightening.
Note: If you have purchased the cord mount
option (sold separately), follow the additional instructions
provided in the user manual.
Care Instructions:
To clean the light fixture, use a soft dry cloth or feather
duster. Do not use abrasive or chemical agents.
ASSEMBLY INSTRUCTIONS
A L
C B
D
E
F
G
Diagram 1
Bulbs not included
I C
J H
Diagram 2
K
Junio 1-Light Pendant
Item # TOB5645-1
NOTICE:
This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
TOOLS REQUIRED (NOT INCLUDED):
Phillips Screwdriver
Slotted Screwdriver
Wire Strippers
Wire Cutters
1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove mounting plate (A) from canopy (G) by removing screws (F). 3. Remove metal plate (D) from mounting plate (A) by removing collar
rings (E). 4. Install mounting plate (A) to junction box and secure with mounting
screws (C). 5. Feed fixture wires through collar rings (E) and metal plate (D).
NOTE: Slide packaging up cord for light head inspection, then slide back down and leave in place until installation is complete. See diagram 1. 6. Insert fixture wires through the center hole of mounting bracket and secure with set screws (B) using provided wrench (H). See diagram 2. NOTE: Set fixture to desired height before moving to next step. 7. Cut excess wires, being sure to leave enough to reach the junction box. Separate wires, and strip insulation on each 5/8″. 8. Wrap supply ground wire (bare copper) around the green grounding screw. Tighten. Continue fixture ground wire and connect to supply ground wire (usually green or bare copper) using wire nut (L). NOTE: It is imperative that the fixture is grounded. 9. Connect fixture neutral wire (white) to the supply neutral wire (usually white) using wire nut (L).
M
LI ST ED
US
ASSEMBLY INSTRUCTIONS
A L
C B
D
E
F
G
Diagram 1
Bulbs not included
I C
J H
Diagram 2
K
Junio 1-Light Pendant Item # TOB5645-1
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
10. Connect fixture hot wire (black) to the supply hot wire (usually black) using wire nut (L). CAUTION: Do not reverse the hot and neutral connections.
11. Install metal plate (D) to mounting plate (A) and secure with collar ring (E).
12. Install canopy (G) to mounting plate (A) and secure with screws (F). 13. Install light bulb into the socket. 14. Install glass shade (K) to fixture body (I) and secure with
thumbscrews (J). NOTE: Thread thumbscrews (J) in evenly to ensure glass is properly secured. Do not overtighten.
Care Instructions: Clean only with a soft dry cloth or feather duster. Do Not use abrasive or chemical agents.
M
LI ST ED
US
ASSEMBLY INSTRUCTIONS
A B C
Assembled View
F
G D E
Junio Cord Mount Item # TOB5645-PRT
NOTICE: This light fixture should be installed in accordance with all applicable, local installation codes, and by a person familiar with the construction and operation of it, as well as the hazards involved. Inspect item and contents carefully. If any damage or defect is found, do not install. Retain all packaging material until installation is complete and approved.
CORD MOUNT OPTION (SOLD SEPARATELY) 1. Carefully remove all parts from the box. Place on a clean, soft surface. 2. Remove canopy (F) from mounting plate (B) by unscrewing, then
remove threaded cap (E) and wire mounts (G & D) from mounting plate. 3. Using the mounting plate (B) as a guide, line up with ceiling and mark anchor positions. 4. Using a drill bit slightly smaller than the anchor, drill holes in the marked positions. Install anchors (A) into the holes using hammer. 5. Install mounting plate (B) to ceiling and secure with wood screws (C) to anchors (A). 6. Thread canopy (F) to mounting plate (B). 7. Place fixture wire into slot of bottom wire mount (D). 8. Adjust fixture wire to desired height, then install wire mounts (G & D) to mounting plate (B) and secure with threaded cap (E).
Care Instructions: Clean only with a soft dry cloth or feather duster. Do Not use abrasive or chemical agents.
M
LI ST ED
US
